SUMMARY I am copying slides, and am making three CR2 images at EV 0, 1.5, and 3. I have been using Aurora HDR 2019 in batch mode. It is fast and easy. I decided to try the stacked images tool in DigiKam. The opening window shows align_image_stack as version 2019.0.0; it shows enfuse as version 4.3 (this is confusing because the enfuse/enblend web site only has version 4.2). I selected 3 CR2 images as a test. I made sure that I highlighted them in the stacked images window. It has now been 20 minutes and the Pre-processing Bracketed Images indicates that the process in under progress, and tells me this can take a while. This long is wrong. I wonder what is going on. STEPS TO REPRODUCE 1. 2. 3. OBSERVED RESULT EXPECTED RESULT SOFTWARE/OS VERSIONS Windows: Operating System Windows 10 Professional (x64) Version 1803 (build 17134.765) Install Language: English (United States) System Locale: English (United States) Installed: 2/21/2019 11:48:09 AM Servicing Branch: Current Branch (CB) Boot Mode: Legacy BIOS in UEFI (Secure Boot not supported) System Model CyberPowerPC C SERIES Enclosure Type: Desktop Processor a 3.70 gigahertz Intel Core i7-8700K 384 kilobyte primary memory cache 1536 kilobyte secondary memory cache 12288 kilobyte tertiary memory cache 64-bit ready Multi-core (6 total) Hyper-threaded (12 total) Main Circuit Board b Board: ASRock Z370 SLI Xtreme Serial Number: M80-B1003800527 Bus Clock: 100 megahertz UEFI: American Megatrends Inc. P1.30 11/27/2017 Drives 3479.98 Gigabytes Usable Hard Drive Capacity 2966.51 Gigabytes Hard Drive Free Space ASUS DRW-24F1ST d [Optical drive] hp DVD-RAM GH40L [Optical drive] ADATA SU650 [Hard drive] (480.10 GB) -- drive 0, s/n AA000000000287, rev Q1124A0, SMART Status: Healthy Generic- Compact Flash USB Device [Hard drive] -- drive 4 Generic- MS/MS-Pro USB Device [Hard drive] -- drive 6 Generic- SD/MMC USB Device [Hard drive] -- drive 3 Generic- SM/xD-Picture USB Device [Hard drive] -- drive 5 TOSHIBA DT01ACA300 [Hard drive] (3000.59 GB) -- drive 2, s/n 38RJ5KJAS, rev MX6OABB0, SMART Status: Healthy TOSHIBA DT01ACA300 [Hard drive] (3000.59 GB) -- drive 1, s/n 38RJ5MLAS, rev MX6OABB0, SMART Status: Healthy Memory Modules c,d 16318 Megabytes Usable Installed Memory Slot 'ChannelA-DIMM0' is Empty Slot 'ChannelA-DIMM1' has 8192 MB (serial number 1B9E0000) Slot 'ChannelB-DIMM0' is Empty Slot 'ChannelB-DIMM1' has 8192 MB (serial number 44760000) Local Drive Volumes c: (NTFS on drive 0) * 479.53 GB 355.38 GB free d: (NTFS on drive 2) 3000.46 GB 2611.13 GB free * Operating System is installed on c: Network Drives None detected ADDITIONAL INFORMATION
Created attachment 120535 [details] Console re
Created attachment 120536 [details] console report on stacked image operation
This message is the cause, the problem is already solved in the pre-release of digiKam-6.2.0. QObject::disconnect: No such signal DigikamGenericExpoBlendingPlugin::ExpoBlendingThread::finished(Digikam::ExpoBlendingActionData) https://files.kde.org/digikam/ Maik
*** Bug 410303 has been marked as a duplicate of this bug. ***