Application: knotify4 (4.0) KDE Platform Version: 4.4.5 (KDE 4.4.5) (Compiled from sources) Qt Version: 4.6.3 Operating System: Linux 2.6.36-gentoo-r1 x86_64 Distribution (Platform): Gentoo Packages -- Information about the crash: K3b started to simulate burning a video DVD which stopped a few seconds after starting. Then Knotify crashed immediately. KDE 4.4.5 Devices ----------------------- Optiarc DVD RW AD-7241S 1.03 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] [%7] System ----------------------- K3b Version: 2.0.1 KDE Version: 4.4.5 (KDE 4.4.5) QT Version: 4.6.3 Kernel: 2.6.36-gentoo-r1 Used versions ----------------------- cdrecord: 3.0 cdrecord ----------------------- scsidev: '/dev/sr0' devname: '/dev/sr0' scsibus: -2 target: -2 lun: -2 Warning: Open by 'devname' is unintentional and not supported. Linux sg driver version: 3.5.27 SCSI buffer size: 64512 /usr/bin/cdrecord: Warning: Cannot read drive buffer. /usr/bin/cdrecord: Warning: The DMA speed test has been skipped. Cdrecord-ProDVD-ProBD-Clone 3.00 (x86_64-unknown-linux-gnu) Copyright (C) 1995-2010 Jörg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.9'. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'Optiarc ' Identifikation : 'DVD RW AD-7241S ' Revision : '1.03' Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. Current: DVD-R sequential recording Profile: DVD+R/DL Profile: DVD+R Profile: DVD+RW Profile: DVD-R/DL layer jump recording Profile: DVD-R/DL sequential recording Profile: DVD-RW sequential recording Profile: DVD-RW restricted overwrite Profile: DVD-RAM Profile: DVD-R sequential recording (current) Profile: DVD-ROM Profile: CD-RW Profile: CD-R Profile: CD-ROM Profile: Removable Disk Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd). Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE Supported modes: PACKET SAO LAYER_JUMP Drive buf size : 1802240 = 1760 KB FIFO size : 67108864 = 65536 KB /usr/bin/cdrecord: Data does not fit on current disk. /usr/bin/cdrecord: Notice: -overburn is not expected to work with DVD/BD media. /usr/bin/cdrecord: Notice: Overburning active. Trying to write more than the official disk capacity. Track 01: data 4498 MB Total size: 4498 MB = 2303145 sectors Current Secsize: 2048 Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: -4649 Reducing transfer size from 64512 to 32768 bytes. Starting to write CD/DVD/BD at speed 20 in dummy SAO mode for single session. Last chance to quit, starting dummy write in 3 seconds. 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... /usr/bin/cdrecord: Input/output error. reserve_track_rzone: scsi sendcmd: no error CDB: 53 00 00 00 00 00 23 24 A9 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.001s timeout 200s /usr/bin/cdrecord: Cannot open next track. input buffer ready. BURN-Free is OFF. Turning BURN-Free on Writing time: 0.031s Average write speed 999.0x. Fixating... Fixating time: 0.001s /usr/bin/cdrecord: fifo had 2046 puts and 0 gets. /usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. BURN-Free was not used. cdrecord command: ----------------------- /usr/bin/cdrecord -v gracetime=2 dev=/dev/sr0 speed=20 -sao -dummy driveropts=burnfree fs=64m -overburn -data -tsize=2303145s - -- Backtrace: Application: KNotify (knotify4), signal: Aborted [Current thread is 1 (Thread 0x7f5ce80d0760 (LWP 4304))] Thread 6 (Thread 0x7f5cd7c90710 (LWP 4387)): #0 pthread_cond_timedwait@@GLIBC_2.3.2 () at ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S:212 #1 0x00007f5cdcb04be1 in fprintf (this=0x1e2d004, key=0x7f5cd7c8fe10 "\005\203\342L", exp_level=31641600, changed_cb=0x1e2cfd8, cb_data=0x7f5cd7c8fe00) at /usr/include/bits/stdio2.h:98 #2 config_register_key (this=0x1e2d004, key=0x7f5cd7c8fe10 "\005\203\342L", exp_level=31641600, changed_cb=0x1e2cfd8, cb_data=0x7f5cd7c8fe00) at configfile.c:471 #3 0x00007f5ce68b2de0 in ?? () from /lib/libpthread.so.0 #4 0x00007f5cd7c909d0 in ?? () #5 0x0000000000000000 in ?? () Thread 5 (Thread 0x7f5cd748f710 (LWP 4390)): [KCrash Handler] #5 0x00007f5ce4e8cb45 in raise () from /lib/libc.so.6 #6 0x00007f5ce4e8e350 in abort () from /lib/libc.so.6 #7 0x00007f5ce6b30024 in qt_message_output (msgType=QtFatalMsg, buf=<value optimized out>) at global/qglobal.cpp:2266 #8 0x00007f5ce6b301be in qt_message (msgType=QtFatalMsg, msg=0x7f5ce6c88068 "ASSERT: \"%s\" in file %s, line %d", ap=0x7f5cd748e140) at global/qglobal.cpp:2312 #9 0x00007f5ce6b30375 in qFatal (msg=0x1126 <Address 0x1126 out of bounds>) at global/qglobal.cpp:2495 #10 0x00007f5cdcd62429 in Phonon::Xine::XineStream::nullAudioPort (this=0x2447150) at /mnt/bigdata/ebuild/working/portage/media-sound/phonon-4.4.2/work/phonon-4.4.2/xine/xinestream.cpp:216 #11 0x00007f5cdcd6624f in Phonon::Xine::XineStream::createStream (this=0x2447150) at /mnt/bigdata/ebuild/working/portage/media-sound/phonon-4.4.2/work/phonon-4.4.2/xine/xinestream.cpp:527 #12 0x00007f5cdcd6708b in Phonon::Xine::XineStream::event (this=0x2447150, ev=0x24413f0) at /mnt/bigdata/ebuild/working/portage/media-sound/phonon-4.4.2/work/phonon-4.4.2/xine/xinestream.cpp:1244 #13 0x00007f5ce5b4ce8c in QApplicationPrivate::process_cmdline (this=0x1cd1ba0) at kernel/qapplication.cpp:577 #14 0x0000000000000000 in ?? () The current source language is "auto; currently asm". Thread 4 (Thread 0x7f5cd6a84710 (LWP 4397)): #0 0x00007f5ce4f36a13 in poll () from /lib/libc.so.6 #1 0x00007f5cd6a8b15e in ?? () #2 0x0000000000000000 in ?? () Thread 3 (Thread 0x7f5cd6283710 (LWP 4398)): #0 pthread_cond_wait@@GLIBC_2.3.2 () at ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S:162 #1 0x00007f5cdcb12ce3 in ao_exit (this_gen=<value optimized out>) at audio_out.c:1734 #2 0x00007f5cdcb12dbb in ao_exit (this_gen=<value optimized out>) at audio_out.c:1676 #3 0x0000000001e73950 in ?? () #4 0x0000000001e73980 in ?? () #5 0x00007f5cdcb146fa in _x_ao_new_port (xine=<value optimized out>, driver=<value optimized out>, grab_only=<value optimized out>) at audio_out.c:2166 #6 0x00007f5ce68a8a21 in start_thread () from /lib/libpthread.so.0 #7 0x00007f5ce4f4066d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:115 Thread 2 (Thread 0x7f5cd5660710 (LWP 13299)): #0 pthread_cond_timedwait@@GLIBC_2.3.2 () at ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S:212 #1 0x00007f5cdcb04be1 in fprintf (this=0x243e4f4, key=0x7f5cd565fe10 "\005\203\342L", exp_level=38003952, changed_cb=0x243e4c8, cb_data=0x7f5cd565fe00) at /usr/include/bits/stdio2.h:98 #2 config_register_key (this=0x243e4f4, key=0x7f5cd565fe10 "\005\203\342L", exp_level=38003952, changed_cb=0x243e4c8, cb_data=0x7f5cd565fe00) at configfile.c:471 #3 0x00007f5ce68b2de0 in ?? () from /lib/libpthread.so.0 #4 0x00007f5cd56609d0 in ?? () #5 0x0000000000000000 in ?? () Thread 1 (Thread 0x7f5ce80d0760 (LWP 4304)): #0 0xffffffffff60014c in ?? () #1 0x00007fff4670e5d0 in ?? () #2 0x00007fff467c382e in ?? () Backtrace stopped: previous frame identical to this frame (corrupt stack?) Possible duplicates by query: bug 243190, bug 230718, bug 230717, bug 220048. Reported using DrKonqi
*** This bug has been marked as a duplicate of bug 191366 ***