Version: 0.11.6cvs (using KDE 3.2 BRANCH >= 20040204, Mandrake Linux Cooker i586 - Cooker) Compiler: gcc version 3.3.2 (Mandrake Linux 10.0 3.3.2-6mdk) OS: Linux (i686) release 2.4.22-10mdk I've been using the same CD burner since version 7 of Mandrake. This is the first time my "Smart and Friendly" brand CD Writer has failed. The following is the debug output from K3B. System ----------------------- K3b Version: 0.11.6cvs KDE Version: 3.2 BRANCH >= 20040204 QT Version: 3.2.3 cdrecord ----------------------- scsidev: 'ATAPI:/dev/ide/host0/bus1/target1/lun0/cd' devname: 'ATAPI:/dev/ide/host0/bus1/target1/lun0/cd' scsibus: -2 target: -2 lun: -2 Warning: Using ATA Packet interface. Warning: The related libscg interface code is in pre alpha. Warning: There may be fatal problems. SCSI buffer size: 64512 Cdrecord-Clone 2.01a26-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to <warly@mandrakesoft.com>. Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM Using libscg version 'schily-0.8'. atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'SAF ' Identifikation : 'CD-RW2224 ' Revision : '2.43' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC SWABAUDIO Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1904640 = 1860 KB FIFO size : 4194304 = 4096 KB Track 01: data 615 MB Total size: 706 MB (69:59.02) = 314927 sectors Lout start: 706 MB (70:01/02) = 314927 sectors Current Secsize: 2048 ATIP start of lead in: -150 (00:00/00) Disk type: unknown dye (reserved id code) Manuf. index: -1 Manufacturer: unknown (not in table) Starting to write CD/DVD at speed 2.0 in real SAO mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Sending CUE sheet... /usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 1 at -150 Starting new track at sector: 0 Track 01: 0 of 615 MB written. Track 01: 1 of 615 MB written (fifo 98%) [buf 66%] 34.0x. Track 01: 2 of 615 MB written (fifo 100%) [buf 100%] 0.2x. Track 01: 3 of 615 MB written (fifo 100%) [buf 100%] 4.1x. Track 01: 4 of 615 MB written (fifo 100%) [buf 100%] 4.0x. Track 01: 5 of 615 MB written (fifo 100%) [buf 100%] 4.1x. Track 01: 6 of 615 MB written (fifo 100%) [buf 100%] 4.0x. Track 01: 7 of 615 MB written (fifo 100%) [buf 100%] 4.1x. Track 01: 8 of 615 MB written (fifo 100%) [buf 100%] 4.0x. Track 01: 9 of 615 MB written (fifo 100%) [buf 100%] 4.1x. Track 01: 10 of 615 MB written (fifo 100%) [buf 100%] 4.0x. Track 01: 11 of 615 MB written (fifo 100%) [buf 100%] 4.1x. Track 01: 12 of 615 MB written (fifo 100%) [buf 100%] 4.0x. Track 01: 13 of 615 MB written (fifo 100%) [buf 100%] 4.1x. Track 01: 14 of 615 MB written (fifo 100%) [buf 100%] 4.0x. Track 01: 15 of 615 MB written (fifo 100%) [buf 100%] 4.1x. Track 01: 16 of 615 MB written (fifo 100%) [buf 100%] 4.0x. Track 01: 17 of 615 MB written (fifo 100%) [buf 100%] 4.1x. Track 01: 18 of 615 MB written (fifo 100%) [buf 100%] 4.0x. Track 01: 19 of 615 MB written (fifo 100%) [buf 100%] 4.1x. Track 01: 20 of 615 MB written (fifo 100%) [buf 100%] 3.9x. Track 01: 21 of 615 MB written (fifo 100%) [buf 100%] 4.1x. Track 01: 22 of 615 MB written (fifo 100%) [buf 100%] 3.9x. /usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 2D A7 00 00 1F 00 status: 0x0 (GOOD STATUS) cmd finished after 0.100s timeout 200s /usr/bin/cdrecord: A write error occured. /usr/bin/cdrecord: Please properly read the error message above. write track data: error after 23934976 bytes Writing time: 89.223s Average write speed 50.7x. Min drive buffer fill was 100% Fixating... Fixating time: 0.011s /usr/bin/cdrecord: fifo had 441 puts and 378 gets. /usr/bin/cdrecord: fifo was 0 times empty and 362 times full, min fill was 95%. cdrecord comand: ----------------------- /usr/bin/cdrecord -v gracetime=2 dev=ATAPI:/dev/ide/host0/bus1/target1/lun0/cd speed=2 -dao -eject -data -tsize=314927s - mkisofs ----------------------- 314927 0.16% done, estimate finish Sat Apr 24 12:27:09 2004 0.32% done, estimate finish Sat Apr 24 12:22:00 2004 0.48% done, estimate finish Sat Apr 24 12:20:14 2004 0.64% done, estimate finish Sat Apr 24 12:19:22 2004 0.80% done, estimate finish Sat Apr 24 12:35:37 2004 0.95% done, estimate finish Sat Apr 24 13:44:13 2004 1.12% done, estimate finish Sat Apr 24 13:34:27 2004 1.27% done, estimate finish Sat Apr 24 13:27:27 2004 1.43% done, estimate finish Sat Apr 24 13:20:50 2004 1.59% done, estimate finish Sat Apr 24 13:16:35 2004 1.75% done, estimate finish Sat Apr 24 13:12:56 2004 1.91% done, estimate finish Sat Apr 24 13:09:10 2004 2.07% done, estimate finish Sat Apr 24 13:06:47 2004 2.22% done, estimate finish Sat Apr 24 13:04:44 2004 2.39% done, estimate finish Sat Apr 24 13:02:52 2004 2.54% done, estimate finish Sat Apr 24 13:00:40 2004 2.70% done, estimate finish Sat Apr 24 12:59:20 2004 2.86% done, estimate finish Sat Apr 24 12:58:10 2004 3.02% done, estimate finish Sat Apr 24 12:56:29 2004 3.18% done, estimate finish Sat Apr 24 12:55:34 2004 3.34% done, estimate finish Sat Apr 24 12:54:44 2004 3.49% done, estimate finish Sat Apr 24 12:53:58 2004 3.66% done, estimate finish Sat Apr 24 12:52:46 2004 3.81% done, estimate finish Sat Apr 24 12:52:10 2004 3.97% done, estimate finish Sat Apr 24 12:51:36 2004 4.13% done, estimate finish Sat Apr 24 12:50:40 2004 4.29% done, estimate finish Sat Apr 24 12:50:10 2004 mkisofs comand: ----------------------- /usr/bin/mkisofs -gui -graft-points -V Mandrk100 -volset -A K3B THE CD KREATOR VERSION 0.11.6cvs (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM -P -p K3b - Version 0.11.6cvs -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-rbraupp/k3bRu7tZb.tmp -r -hide-list /tmp/kde-rbraupp/k3bw3VRRa.tmp -l -iso-level 2 -path-list /tmp/kde-rbraupp/k3bj3lqOa.tmp
error code was 254 - all 3 times. First attempt was at all default settings - failed at 24Meg Second attempt - retry with defaults - just a new CD - failed at 24Meg Third attempt - selected 2X write speed - (new CD) - failed at 24Meg All above CDs from same set of 100 that worked well in Mdk 9.2. (The same set of CDs was used to burn Mdk 10.0 with same burner.)
*** This bug has been marked as a duplicate of 75023 ***