Version:           0.10 (using KDE 3.1.4)
Installed from:    SuSE
Compiler:          gcc version 3.3.1 (SuSE Linux)
OS:          Linux (i686) release 2.4.21-199-athlon

LOG:
System
-----------------------
K3b Version: 0.10
KDE Version: 3.1.4
QT Version:  3.2.1

cdrecord
-----------------------
/usr/bin/cdrecord: Warning: not running as root user, fs= option ignored.
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.1.25
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.75-resmgr-patch '@(#)scsi-linux-sg.c 1.75 02/10/21 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01a18-dvd (i686-suse-linux) Copyright (C) 1995-2003 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord is not to be bothered with problems in this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.7'
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4040B'
Revision       : 'A300'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x0012 
Profile: 0x0011 
Profile: 0x0014 
Profile: 0x0013 
Profile: 0x001A 
Profile: 0x001B 
Profile: 0x0010 
Profile: 0x0009 
Profile: 0x000A (current)
Profile: 0x0008 
Profile: 0x0002 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1204224 = 1176 KB
FIFO size      : 33554432 = 32768 KB
Track 01: data   695 MB        
Total size:      798 MB (79:04.98) = 355874 sectors
Lout start:      798 MB (79:06/74) = 355874 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 2
  Reference speed: 6
  Is not unrestricted
  Is erasable
  Disk sub type: High speed Rewritable (CAV) media (1)
  ATIP start of lead in:  -12900 (97:10/00)
  ATIP start of lead out: 359849 (79:59/74)
  1T speed low:  4 1T speed high: 10
  2T speed low:  4 2T speed high:  0 (reserved val  6)
  power mult factor: 1 5
  recommended erase/write power: 5
  A1 values: 24 1A D8
  A2 values: 26 B2 48
Disk type:    unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Manufacturer is unknown because of the orange forum embargo.
As the orange forum likes to get money for recent information,
it may be that this media does not use illegal manufacturer coding.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 3975
Starting to write CD/DVD at speed 10 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
/usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 FF FF FF 6A 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 90 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.002s timeout 200s
Writing pregap for track 1 at -150
write track pad data: error after 0 bytes
BFree: 1176 K BSize: 1176 K
Starting new track at sector: 0
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 90 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.003s timeout 200s
/usr/bin/cdrecord: A write error occured.
/usr/bin/cdrecord: Please properly read the error message above.
Track 01:    0 of  695 MB written.
write track data: error after 0 bytes
Writing  time:   45.471s
Average write speed 104.5x.
Fixating...
Fixating time:    0.009s
/usr/bin/cdrecord: fifo had 64 puts and 1 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.

cdrecord comand:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=1,0,0 speed=10 driveropts=burnfree -eject fs=32m -dao -data /winsave/linux/mandrake/Mandrakelinux-10.0-Community-Download-CD3.i586.iso