SUMMARY
I'm using Kubuntu 22.04.1 with system-monitor 5.24.4

Using sensors I see:

mirto@bianco500:~/Scaricati$ sudo sensors
[sudo] password di mirto: 
iwlwifi_1-virtual-0
Adapter: Virtual device
temp1:        +36.0°C  

nct6797-isa-0a20
Adapter: ISA adapter
in0:                   712.00 mV (min =  +0.00 V, max =  +1.74 V)
in1:                   1000.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in2:                     3.33 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in3:                     3.36 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in4:                   1000.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:                   144.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in6:                   824.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in7:                     3.33 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in8:                     3.25 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in9:                     1.78 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in10:                    0.00 V  (min =  +0.00 V, max =  +0.00 V)
in11:                  576.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                    1.10 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:                  672.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                    1.51 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
fan1:                     0 RPM  (min =    0 RPM)
fan2:                   666 RPM  (min =    0 RPM)
fan3:                   563 RPM  (min =    0 RPM)
fan4:                  1239 RPM  (min =    0 RPM)
fan5:                  1237 RPM  (min =    0 RPM)
fan6:                     0 RPM  (min =    0 RPM)
fan7:                     0 RPM  (min =    0 RPM)
SYSTIN:                 +32.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = CPU diode
CPUTIN:                 +34.0°C  (high = +115.0°C, hyst = +90.0°C)  sensor = thermistor
AUXTIN0:                +35.5°C  (high = +115.0°C, hyst = +90.0°C)  sensor = thermistor
AUXTIN1:               -128.0°C    sensor = thermistor
AUXTIN2:                +52.0°C    sensor = thermistor
AUXTIN3:                 -1.0°C    sensor = thermistor
SMBUSMASTER 0:          +39.5°C  
PCH_CHIP_CPU_MAX_TEMP:   +0.0°C  
PCH_CHIP_TEMP:           +0.0°C  
PCH_CPU_TEMP:            +0.0°C  
intrusion0:            ALARM
intrusion1:            ALARM
beep_enable:           disabled

nvme-pci-0100
Adapter: PCI adapter
Composite:    +31.9°C  (low  = -20.1°C, high = +83.8°C)
                       (crit = +88.8°C)

k10temp-pci-00c3
Adapter: PCI adapter
Tctl:         +39.9°C  
Tccd1:        +39.0°C  

amdgpu-pci-2d00
Adapter: PCI adapter
vddgfx:      875.00 mV 
fan1:             N/A  (min =    0 RPM, max = 6900 RPM)
edge:         +53.0°C  (crit = +97.0°C, hyst = -273.1°C)
slowPPT:       5.22 W  (cap =  35.00 W)

mirto@bianco500:~/Scaricati$

But, when I edit a page, under sensors -> hardware sensors I see only:

iwlwifi_1-virtual-0
nct6797-isa-0a20
nvme-pci-0100

The[b] k10temp-pci-00c3[/b] is missing



STEPS TO REPRODUCE
1. edit a page and modify a graph
2. look at sensors -> hardware sensors
3. see that k10temp-pci-00c3 is missing

OBSERVED RESULT
No sensors belonging to k10temp-pci-00c3 is viewable

EXPECTED RESULT
see the sensors
k10temp-pci-00c3
Adapter: PCI adapter
Tctl:         +40.2°C  
Tccd1:        +41.2°C  



SOFTWARE/OS VERSIONS
Windows: 
macOS: 
Linux/KDE Plasma: Kubuntu 22.04.1
(available in About System)
KDE Plasma Version: 5.24.6
KDE Frameworks Version: 5.93.0
Qt Version: 5.15.3

ADDITIONAL INFORMATION