after upgrade to Windows 11, digikam 7.2 does not start. then i installed 7.3, but it alos does not start ( the sameproblem with adobe elements 14) Now i go back to Windows 10 an dikam 7.2 is immediately startet. Then i installed 7.3 and this running alos very good. What can i do, to work digikam with windows 11?
We need at least the console trace captured with DebugView as explained here : https://www.digikam.org/contribute/
*** Bug 443484 has been marked as a duplicate of this bug. ***
I installed Windows 11 in a Virtualbox on Linux. I had to bypass the TPM check with a registry entry during the installation. I was able to install our current developer version of digiKam-7.4.0 from http://files.kde.org/digikam and run the setup. The binary files were downloaded correctly. Adding a network collection also works. A short test shows no problems, digiKam works here under Windows 11 without any problems. Maik
The official digiKam-7.3.0 version also works here under Windows 11 without any problems. A DebugView Log with activated Debug environment variable is therefore required as requested in Comment 1 by Gilles, since we cannot reproduce the problem. Before you test the developer version digiKam-7.4.0, make a backup of the database, as a database update is being carried out. Maik
Warning. windows 11 Hyper V sub sytem is bugous : https://support.microsoft.com/en-us/topic/kb5007125-compatibility-hold-when-you-upgrade-to-windows-11-with-oracle-virtualbox-installed-ea84b50c-77f5-473c-99a8-81c2b7b53d35 I read somewhere that the problem affect also the compatibility with other applications Gilles
This report is also important. Problem touch also Windows 10 : https://docs.microsoft.com/en-us/troubleshoot/windows-client/application-management/virtualization-apps-not-work-with-hyper-v Gilles
I es going Back to Windows 10. There i have no Problem. In t bis Werk, i Reed in "Chip", that the Same Problem was with Kaspersky, IT didnt start with Windows 11. Microsoft will repair It. If you know a answer, pleased inform me. Thank you Manfred Weidenmüller Manfred Weidenmüller Blumenstraße 6 90574 Roßtal Tel. 09127 9953 E-Mail: manfredwei@gmx.deAm 09.10.21, 04:44 schrieb bugzilla_noreply@kde.org: https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #5 from caulier.gilles@gmail.com --- Warning. windows 11 Hyper V sub sytem is bugous : https://support.microsoft.com/en-us/topic/kb5007125-compatibility-hold-when-you-upgrade-to-windows-11-with-oracle-virtualbox-installed-ea84b50c-77f5-473c-99a8-81c2b7b53d35 I read somewhere that the problem affect also the compatibility with other applications Gilles -- You are receiving this mail because: You reported the bug.
I was going back to Windows 10. There i have no Problem. In t this week, i reed in "Chip", that the Same Problem was with Kaspersky, IT didnt start with Windows 11. Microsoft will repair It. If you know a answer, please inform me. Thank you Manfred Weidenmüller Manfred Weidenmüller Blumenstraße 6 90574 Roßtal Tel. 09127 9953 E-Mail: manfredwei@gmx.deAm 08.10.21, 19:55 schrieb Maik Qualmann <bugzilla_noreply@kde.org>: https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #2 from Maik Qualmann <metzpinguin@gmail.com> --- *** Bug 443484 has been marked as a duplicate of this bug. *** -- You are receiving this mail because: You reported the bug.
If i understand you, there are compatibility problem with applications running fine under Windows 10 but not under Windows 11 ? If yes, thanks Microsoft to make a mess... Best Gilles Caulier
Manfred, Stable digiKam 7.4.0 Windows Installer is published. Please check if problem is reproducible. Thanks in advance Gilles Caulier
Created attachment 144516 [details] attachment-6753-0.html Thanks for the information. I have installed 7.4.0. Ran fine on Windows 10. Then upgraded to Windows 11 - (No reinstalling Win11). All programs run under Windows 11 BUT NOT digikam 7.4.0 I then downloaded digikam again and reinstalled but: after clicking on the button, a small blue circle rotates, but after about 7 seconds it goes out , nothing else happens. digikam does not open. Is this only with me ??? Do I have to go back to Windows 10 now? Greetings Manfred Weidenmüller Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel: 0049 (0)9127 9953 Von: bugzilla_noreply@kde.org Gesendet: Montag, 13. Dezember 2021 11:15 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #10 from caulier.gilles@gmail.com --- Manfred, Stable digiKam 7.4.0 Windows Installer is published. Please check if problem is reproducible. Thanks in advance Gilles Caulier -- You are receiving this mail because: You reported the bug. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
Hmm, it's strange. I have already tested digiKam on 3 Windows 11 computers. However, all 3 computer installations were hacked with disabled TPM detection. Maik
Created attachment 144533 [details] attachment-18245-0.html what mostly you mean by: However, all 3 computer installations were hacked with disabled TPM detection. can I or should I turn off TPM Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel: 0049 (0)9127 9953 Von: Maik Qualmann Gesendet: Montag, 13. Dezember 2021 20:31 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #12 from Maik Qualmann <metzpinguin@gmail.com> --- Hmm, it's strange. I have already tested digiKam on 3 Windows 11 computers. However, all 3 computer installations were hacked with disabled TPM detection. Maik -- You are receiving this mail because: You reported the bug. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
Created attachment 144534 [details] 840CDB1080F1478CA3E5DE221512FF2D.jpg This is my TPM. Must i something to do with iTß Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel: 0049 (0)9127 9953 Von: Maik Qualmann Gesendet: Montag, 13. Dezember 2021 20:31 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #12 from Maik Qualmann <metzpinguin@gmail.com> --- Hmm, it's strange. I have already tested digiKam on 3 Windows 11 computers. However, all 3 computer installations were hacked with disabled TPM detection. Maik -- You are receiving this mail because: You reported the bug. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
Created attachment 144535 [details] 855FD07DE392400D993ECB3A949B221A.jpg After I clicked on digikam to open it, the following warning appears: I click on "Yes". Then the small blue circle appears again, it rotates, after 6 seconds it is gone and nothing happens. Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel: 0049 (0)9127 9953 Von: Maik Qualmann Gesendet: Montag, 13. Dezember 2021 20:31 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #12 from Maik Qualmann <metzpinguin@gmail.com> --- Hmm, it's strange. I have already tested digiKam on 3 Windows 11 computers. However, all 3 computer installations were hacked with disabled TPM detection. Maik -- You are receiving this mail because: You reported the bug. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
The warnings dialog is not in English. What's that is mean ? Also the "details" link in this dialog can be informative. Gilles Caulier
Link to infamous TMP technology : https://www.easeus.com/knowledge-center/tpm-for-windows11-update.html Microsoft or how to increase complexity of computer in time, step by step... Of course digiKam for Windows as nothing to do with TMP. Gilles Caulier
Created attachment 144536 [details] attachment-28343-0.html Do you want to allow changes to be made to your device through this app from an unknown publisher? digikam.exe publisher: Unknown File origin: Hard disk on this computer Program path: "C:\Program Files\digiKam\digikam.exe". Change notification display time Hide details Yes No Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel: 0049 (0)9127 9953 Von: bugzilla_noreply@kde.org Gesendet: Dienstag, 14. Dezember 2021 10:14 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #16 from caulier.gilles@gmail.com --- The warnings dialog is not in English. What's that is mean ? Also the "details" link in this dialog can be informative. Gilles Caulier -- You are receiving this mail because: You reported the bug. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
My idea with TPM is that when the TPM is active, apps that are not signed are blocked. Windows 11 cannot currently be installed on a computer without TPM 2.0 ... without hacking. Maik
Created attachment 144549 [details] attachment-10594-0.html …and digiKam ist not signed? Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel: 0049 (0)9127 9953 Von: Maik Qualmann Gesendet: Dienstag, 14. Dezember 2021 14:47 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #19 from Maik Qualmann <metzpinguin@gmail.com> --- My idea with TPM is that when the TPM is active, apps that are not signed are blocked. Windows 11 cannot currently be installed on a computer without TPM 2.0 ... without hacking. Maik -- You are receiving this mail because: You reported the bug. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
No, it's not signed. To do it, you need to pay to be registered to the Microsoft Store, and you need to use Microsoft Compiler under Windows to generate binary. 1/ We will not pay for an open source project 2/ We cross compile to 100% the binaries under Linux. No Windows is used at all. This prevent virus and it's more simple for the continuous deployment (aka Windows for developer is a mess). Gilles Caulier
Created attachment 144552 [details] attachment-13278-0.html Thank you for the Information. I did not know before. I understand you. Now ich Change back Windows 10 Thank you Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel: 0049 (0)9127 9953 Von: bugzilla_noreply@kde.org Gesendet: Dienstag, 14. Dezember 2021 19:35 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #21 from caulier.gilles@gmail.com --- No, it's not signed. To do it, you need to pay to be registered to the Microsoft Store, and you need to use Microsoft Compiler under Windows to generate binary. 1/ We will not pay for an open source project 2/ We cross compile to 100% the binaries under Linux. No Windows is used at all. This prevent virus and it's more simple for the continuous deployment (aka Windows for developer is a mess). Gilles Caulier -- You are receiving this mail because: You reported the bug. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
Created attachment 144553 [details] attachment-16857-0.html so, now I'm back on Windows 10 and immediately I clicked on digikam....... and it worked fine. A great program. Much better than Photoshop Organizer. It often crashes, is slow and inflexible. If you learn that digikam works on Windows 11, I would be happy to hear from you. Have a good evening. Regards Manfred Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel: 0049 (0)9127 9953 From: bugzilla_noreply@kde.org Sent: Montag, 13. Dezember 2021 11:15 To: manfredwei@gmx.de Subject: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #10 from caulier.gilles@gmail.com --- Manfred, Stable digiKam 7.4.0 Windows Installer is published. Please check if problem is reproducible. Thanks in advance Gilles Caulier -- You are receiving this mail because: You reported the bug. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
Git commit 081966f3b2f1c236bc994c19a4cd9e7e82018271 by Gilles Caulier. Committed on 06/01/2022 at 17:38. Pushed by cgilles into branch 'master'. Update DrMingw to last stable 0.9.4 M +22 -42 project/bundles/3rdparty/ext_drmingw/CMakeLists.txt M +29 -15 project/bundles/3rdparty/ext_drmingw/drmingw-coreonly.patch M +4 -3 project/bundles/mxe/01-build-mxe.sh M +4 -1 project/bundles/mxe/04-build-installer.sh M +2 -1 project/bundles/mxe/rll.py https://invent.kde.org/graphics/digikam/commit/081966f3b2f1c236bc994c19a4cd9e7e82018271 diff --git a/project/bundles/3rdparty/ext_drmingw/CMakeLists.txt b/project/bundles/3rdparty/ext_drmingw/CMakeLists.txt index ae74fbb15b..6ffe0cd1bd 100644 --- a/project/bundles/3rdparty/ext_drmingw/CMakeLists.txt +++ b/project/bundles/3rdparty/ext_drmingw/CMakeLists.txt @@ -11,20 +11,24 @@ set(PREFIX_ext_drmingw "${EXTPREFIX}") # Compile DrMingw source code ExternalProject_Add(ext_drmingw + DOWNLOAD_DIR ${EXTERNALS_DOWNLOAD_DIR} - URL https://github.com/jrfonseca/drmingw/archive/0.9.2.tar.gz - URL_MD5 08f6ab4587deeea2406a69a115d7a8c7 + + GIT_REPOSITORY https://github.com/jrfonseca/drmingw.git + GIT_TAG 0.9.4 INSTALL_DIR ${EXTPREFIX_drmingw} PATCH_COMMAND ${PATCH_COMMAND} -p1 -i ${CMAKE_CURRENT_SOURCE_DIR}/drmingw-coreonly.patch - CONFIGURE_COMMAND cp ${CMAKE_CURRENT_SOURCE_DIR}/../../../../bootstrap.mxe <SOURCE_DIR>/. && - <SOURCE_DIR>/bootstrap.mxe ${MXE_BUILDROOT} RelWithDebInfo -DBUILD_TESTING=OFF + CONFIGURE_COMMAND git submodule update --init && + cp ${CMAKE_CURRENT_SOURCE_DIR}/../../../../bootstrap.mxe <SOURCE_DIR>/. && + <SOURCE_DIR>/bootstrap.mxe ${MXE_BUILDROOT} RelWithDebInfo -DBUILD_TESTING=OFF -DCMAKE_DISABLE_FIND_PACKAGE_PythonInterp=1 -DCMAKE_DISABLE_FIND_PACKAGE_WinDbg=1 BUILD_COMMAND cd <SOURCE_DIR>/build.mxe && $(MAKE) - INSTALL_COMMAND cd <SOURCE_DIR>/build.mxe && make install/fast + INSTALL_COMMAND cd <SOURCE_DIR>/build.mxe && make install/fast && + ${CMAKE_COMMAND} -E copy <SOURCE_DIR>/build.mxe/thirdparty/libz.dll ${PREFIX_ext_drmingw}/bin/ UPDATE_COMMAND "" BUILD_IN_SOURCE 1 @@ -33,44 +37,20 @@ ExternalProject_Add(ext_drmingw # Deploying DrMingw run-time dependencies -if("${CMAKE_SIZEOF_VOID_P}" EQUAL "8") - - # 64 bits - - ExternalProject_Add(ext_drmingw_deps - DOWNLOAD_DIR ${EXTERNALS_DOWNLOAD_DIR} - URL https://github.com/jrfonseca/drmingw/releases/download/0.9.2/drmingw-0.9.2-win64.7z - URL_HASH MD5=687f29c0c6dc961890e7b4277a87c8a2 - - INSTALL_DIR ${PREFIX_ext_drmingw} - CONFIGURE_COMMAND "" - BUILD_COMMAND "" - INSTALL_COMMAND ${CMAKE_COMMAND} -E copy <SOURCE_DIR>/bin/dbghelp.dll ${PREFIX_ext_drmingw}/bin/ - COMMAND ${CMAKE_COMMAND} -E copy <SOURCE_DIR>/bin/symsrv.dll ${PREFIX_ext_drmingw}/bin/ - COMMAND ${CMAKE_COMMAND} -E copy <SOURCE_DIR>/bin/symsrv.yes ${PREFIX_ext_drmingw}/bin/ - - UPDATE_COMMAND "" - ) - -else() - - # 32 bits - - ExternalProject_Add(ext_drmingw_deps - DOWNLOAD_DIR ${EXTERNALS_DOWNLOAD_DIR} - URL https://github.com/jrfonseca/drmingw/releases/download/0.9.2/drmingw-0.9.2-win32.7z - URL_HASH MD5=78783e43b3509041b86597add2b8c028 - - INSTALL_DIR ${PREFIX_ext_drmingw} - CONFIGURE_COMMAND "" - BUILD_COMMAND "" - INSTALL_COMMAND ${CMAKE_COMMAND} -E copy <SOURCE_DIR>/bin/dbghelp.dll ${PREFIX_ext_drmingw}/bin/ - COMMAND ${CMAKE_COMMAND} -E copy <SOURCE_DIR>/bin/symsrv.dll ${PREFIX_ext_drmingw}/bin/ - COMMAND ${CMAKE_COMMAND} -E copy <SOURCE_DIR>/bin/symsrv.yes ${PREFIX_ext_drmingw}/bin/ +ExternalProject_Add(ext_drmingw_deps + DOWNLOAD_DIR ${EXTERNALS_DOWNLOAD_DIR} + URL https://github.com/jrfonseca/drmingw/releases/download/0.9.3/drmingw-0.9.3-win64.7z + URL_HASH MD5=f2a2e62a0214fe43525cf380d639b927 - UPDATE_COMMAND "" - ) + INSTALL_DIR ${PREFIX_ext_drmingw} + CONFIGURE_COMMAND "" + BUILD_COMMAND "" + INSTALL_COMMAND ${CMAKE_COMMAND} -E copy <SOURCE_DIR>/bin/dbghelp.dll ${PREFIX_ext_drmingw}/bin/ + COMMAND ${CMAKE_COMMAND} -E copy <SOURCE_DIR>/bin/dbgcore.dll ${PREFIX_ext_drmingw}/bin/ + COMMAND ${CMAKE_COMMAND} -E copy <SOURCE_DIR>/bin/symsrv.dll ${PREFIX_ext_drmingw}/bin/ + COMMAND ${CMAKE_COMMAND} -E copy <SOURCE_DIR>/bin/symsrv.yes ${PREFIX_ext_drmingw}/bin/ -endif() + UPDATE_COMMAND "" +) add_dependencies(ext_drmingw ext_drmingw_deps) diff --git a/project/bundles/3rdparty/ext_drmingw/drmingw-coreonly.patch b/project/bundles/3rdparty/ext_drmingw/drmingw-coreonly.patch index c6f4d7055d..1169d1ed7c 100644 --- a/project/bundles/3rdparty/ext_drmingw/drmingw-coreonly.patch +++ b/project/bundles/3rdparty/ext_drmingw/drmingw-coreonly.patch @@ -1,8 +1,35 @@ diff --git a/CMakeLists.txt b/CMakeLists.txt -index b2bdb35..733bc95 100644 +index 9dad199..77b72f8 100644 --- a/CMakeLists.txt +++ b/CMakeLists.txt -@@ -157,8 +157,8 @@ set (MGWHELP_IMPLIB ${CMAKE_ARCHIVE_OUTPUT_DIRECTORY}/libmgwhelp.a) +@@ -64,16 +64,16 @@ add_compiler_flags (-fno-strict-aliasing) + include (StaticCRT) + + # Avoid Posix threads +-execute_process ( +- COMMAND "${CMAKE_COMMAND}" -E echo "#include <thread>\n#ifdef _GLIBCXX_HAS_GTHREADS\n#error _GLIBCXX_HAS_GTHREADS\n#endif" +- COMMAND "${CMAKE_CXX_COMPILER}" -x c++ -E - +- RESULT_VARIABLE STATUS_CXX11_THREADS +- OUTPUT_QUIET +- ERROR_QUIET +-) +-if (NOT STATUS_CXX11_THREADS EQUAL 0) +- message (SEND_ERROR "Win32 threads recommended.") +-endif () ++#execute_process ( ++# COMMAND "${CMAKE_COMMAND}" -E echo "#include <thread>\n#ifdef _GLIBCXX_HAS_GTHREADS\n#error _GLIBCXX_HAS_GTHREADS\n#endif" ++# COMMAND "${CMAKE_CXX_COMPILER}" -x c++ -E - ++# RESULT_VARIABLE STATUS_CXX11_THREADS ++# OUTPUT_QUIET ++# ERROR_QUIET ++#) ++#if (NOT STATUS_CXX11_THREADS EQUAL 0) ++# message (SEND_ERROR "Win32 threads recommended.") ++#endif () + + # Enable stack protection + # XXX: Broken on https://gcc.gnu.org/bugzilla/show_bug.cgi?id=86832 +@@ -145,8 +145,8 @@ set (MGWHELP_IMPLIB ${CMAKE_ARCHIVE_OUTPUT_DIRECTORY}/libmgwhelp.a) set (EXCHNDL_IMPLIB ${CMAKE_ARCHIVE_OUTPUT_DIRECTORY}/libexchndl.a) add_subdirectory (src) @@ -13,16 +40,3 @@ index b2bdb35..733bc95 100644 ############################################################################## -diff --git a/thirdparty/zlib/CMakeLists.txt b/thirdparty/zlib/CMakeLists.txt -index bf66809..c2f3ccf 100644 ---- a/thirdparty/zlib/CMakeLists.txt -+++ b/thirdparty/zlib/CMakeLists.txt -@@ -5,7 +5,7 @@ else () - add_definitions (-DHAVE_UNISTD_H) - endif () - --add_library (z EXCLUDE_FROM_ALL -+add_library (z STATIC - adler32.c - compress.c - crc32.c diff --git a/project/bundles/mxe/01-build-mxe.sh b/project/bundles/mxe/01-build-mxe.sh index 7791ff44a0..a9f9b30360 100755 --- a/project/bundles/mxe/01-build-mxe.sh +++ b/project/bundles/mxe/01-build-mxe.sh @@ -40,7 +40,7 @@ ORIG_PATH="$PATH" ORIG_WD="`pwd`" export PATH=$MXE_BUILDROOT/usr/bin:$MXE_INSTALL_PREFIX/qt5/bin:$PATH - +if [ ] ; then ############################################################################################### # Check if a previous bundle already exist @@ -144,7 +144,7 @@ make MXE_TARGETS=$MXE_BUILD_TARGETS \ echo -e "\n" # gdb \ - +fi ################################################################################################# echo -e "\n" @@ -182,8 +182,9 @@ ${MXE_BUILD_TARGETS}-cmake $ORIG_WD/../3rdparty \ # Low level libraries # NOTE: The order to compile each component here is very important. -${MXE_BUILD_TARGETS}-cmake --build . --config RelWithDebInfo --target ext_opencv -- -j$CPU_CORES +#${MXE_BUILD_TARGETS}-cmake --build . --config RelWithDebInfo --target ext_opencv -- -j$CPU_CORES #${MXE_BUILD_TARGETS}-cmake --build . --config RelWithDebInfo --target ext_libgphoto2 -- -j$CPU_CORES + ${MXE_BUILD_TARGETS}-cmake --build . --config RelWithDebInfo --target ext_drmingw -- -j$CPU_CORES ################################################################################################# diff --git a/project/bundles/mxe/04-build-installer.sh b/project/bundles/mxe/04-build-installer.sh index cff78c7176..fd37007fd6 100755 --- a/project/bundles/mxe/04-build-installer.sh +++ b/project/bundles/mxe/04-build-installer.sh @@ -148,10 +148,13 @@ cp -r $MXE_INSTALL_PREFIX/bin/OpenAL32.dll $BUNDLED echo -e "\n---------- DrMinGw run-time" cp -r $MXE_INSTALL_PREFIX/bin/exchndl.dll $BUNDLEDIR/ 2>/dev/null cp -r $MXE_INSTALL_PREFIX/bin/mgwhelp.dll $BUNDLEDIR/ 2>/dev/null -cp -r $MXE_INSTALL_PREFIX/bin/dbghelp.dll $BUNDLEDIR/ 2>/dev/null +cp -r $MXE_INSTALL_PREFIX/bin/dbgcore.dll $BUNDLEDIR/ 2>/dev/null cp -r $MXE_INSTALL_PREFIX/bin/symsrv.dll $BUNDLEDIR/ 2>/dev/null cp -r $MXE_INSTALL_PREFIX/bin/symsrv.yes $BUNDLEDIR/ 2>/dev/null +# Do not include this file from DrMinGW as it require extra devel dll from Microsoft at run-time. +#cp -r $MXE_INSTALL_PREFIX/bin/dbghelp.dll $BUNDLEDIR/ 2>/dev/null + echo -e "\n---------- Copy executables with recursive dependencies in bundle directory\n" # Executables and plugins shared libraries dependencies scan --------------------------------- diff --git a/project/bundles/mxe/rll.py b/project/bundles/mxe/rll.py index 30d2895d30..1766fd02cb 100755 --- a/project/bundles/mxe/rll.py +++ b/project/bundles/mxe/rll.py @@ -90,7 +90,8 @@ blacklist = [ "dxgi.dll", "dwrite.dll", "ncrypt.dll", - "dbghelp.dll", # blacklisted dll from DrMinGW as it use MSVC dll to show debg dialog. + "dbghelp.dll", # blacklisted dll from DrMinGW as it use MSVC dll to show debug dialog. + "dbgcore.dll", # blacklisted dll from DrMinGW. ] # -----------------------------------------------
Hi Manfred and happy new year, With next 7.5.0, digiKam has an update of an helper component used to catch dysfunctions and get a backtrace. I'm not sure if your dysfunction come from here, but in case of, please try digiKam 7.5.0 pre-release installer available here : https://files.kde.org/digikam/ Thanks in advance Gilles Caulier
Git commit 3e9677cd13537a7880acc3c7b8306735c736931e by Gilles Caulier. Committed on 07/01/2022 at 09:11. Pushed by cgilles into branch 'master'. Add new env.var under Windows to allow to disable DrMinGW at run time, in case of imcompatibility with Windows 11 Related: bug 444296 M +43 -35 core/app/utils/digikam_globals_bundles.cpp https://invent.kde.org/graphics/digikam/commit/3e9677cd13537a7880acc3c7b8306735c736931e
Created attachment 145187 [details] attachment-5112-0.html Thank you for forgetting me and offering me a solution here. However, I do not understand what is an "env.var". Can it be that I should insert the file "digikam_globals_bundles.cpp" somewhere and how? Just copy and then paste where? Manfred Weidenmüller Blumenstraße 6 D- 90574 Roßtal Tel: 09127 9953 E-Mail: manfredwei@gmx.de Von: bugzilla_noreply@kde.org Gesendet: Freitag, 7. Januar 2022 10:14 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #26 from caulier.gilles@gmail.com --- Git commit 3e9677cd13537a7880acc3c7b8306735c736931e by Gilles Caulier. Committed on 07/01/2022 at 09:11. Pushed by cgilles into branch 'master'. Add new env.var under Windows to allow to disable DrMinGW at run time, in case of imcompatibility with Windows 11 Related: bug 444296 M +43 -35 core/app/utils/digikam_globals_bundles.cpp https://invent.kde.org/graphics/digikam/commit/3e9677cd13537a7880acc3c7b8306735c736931e -- You are receiving this mail because: You reported the bug. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
Hi, In fact it's simple. I suspect that the DrMinGW code for Windows, responsible to catch crash and report information at run-time, can be not yet compatible with Windows 11. The last version published that i updated in Windows installer was published at April 2021. The small code can be disabled with an environment variable set before to start digiKam. All technical details are explained here to add a new variable in your Windows account. In fact it just a variable name with a key. https://www.thewindowsclub.com/system-user-environment-variables-windows The variable is "DK_DISABLE_DRMINGW" and the value to set is "1". that all. When digiKam start, it check if variable exists in your account. If yes, DrMinGW is not initialized. Gilles Caulier
Please verify if the new Windows 7.5.0 pre-release installer published this morning can solve this issue with and without to set this variable in your account. https://files.kde.org/digikam/ Thanks in advance Gilles Caulier
Created attachment 145201 [details] attachment-18351-0.html Dear Gilles, I have installed digikam 7.5.0. Then the variable DK_DISABLE_DRMINGW" and the value to set is "1 set up. Then again let the automatic installation set up Windows 11 (several hours).... and now, digikam 7.5.0 is installed on my Windows 11,- automatically taken over- but when I want to start it, the blue circle rotates about 10 seconds, otherwise nothing happens. Now I have to go back to Windows 10. Strange, all other programs were taken over without problems and run perfectly. When I went back to Windows 10 twice before, digikam also opened immediately without a problem. I guess I have no choice but to stay with Windows 10. Too bad. Have a nice evening Manfred Weidenmüller Blumenstraße 6 D- 90574 Roßtal Tel: 09127 9953 E-Mail: manfredwei@gmx.de Von: bugzilla_noreply@kde.org Gesendet: Freitag, 7. Januar 2022 13:28 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #29 from caulier.gilles@gmail.com --- Please verify if the new Windows 7.5.0 pre-release installer published this morning can solve this issue with and without to set this variable in your account. https://files.kde.org/digikam/ Thanks in advance Gilles Caulier -- You are receiving this mail because: You reported the bug. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
Created attachment 145203 [details] attachment-25180-0.html Good evening Gilles, now, i am back in Windows 10….. and all is good. Digikam was the first button what i have pressed….. and digkam opend without any Problem. So Long manfred Manfred Weidenmüller Blumenstraße 6 D- 90574 Roßtal Tel: 09127 9953 E-Mail: manfredwei@gmx.de From: bugzilla_noreply@kde.org Sent: Freitag, 7. Januar 2022 13:28 To: manfredwei@gmx.de Subject: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #29 from caulier.gilles@gmail.com --- Please verify if the new Windows 7.5.0 pre-release installer published this morning can solve this issue with and without to set this variable in your account. https://files.kde.org/digikam/ Thanks in advance Gilles Caulier -- You are receiving this mail because: You reported the bug. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
Created attachment 146132 [details] attachment-8367-0.html Dear Gilles, is there any news for my problem, digiKam does not open under Windows 11? Is there this problem also on other PC's? I want to keep my PC always up to date, so I also want to install Windows 11, but only with digiKam. Thanks Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel.: +49 (0)9127 9953 E-Mail: manfredwei@gmx.de -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
Hi, Look bug #443484 which is a duplicate. As i can see, some Windows 11 installation are problematic. Reverting to Windows 10 fix the problem. Here my Windows 11 VM (virtualbox) has no problem with digiKam... I must admit that i'm a little lost here... Gilles Caulier
Created attachment 146135 [details] attachment-17381-0.html Hello Gilles, you just told me that this problem is also with others, and the solution would be to go back to Windows 10. Today, 1 hour ago, I received the latest update for my Windows 10 and when I wanted to open digiKam now, it no longer works!!!!!!, behaves the same as Windows 11. The blue circle rotates a few seconds and then stops. Is there no solution???? And it's only with digiKam, all the others, even the free ones, work fine. It would be a real shame if I had to go back to Adobe Organizer now. Greetings Manfred This is my Windows: Edition Windows 10 Pro Version 21H2 Installed on 17.11.2021 Operating system build 19044.1503 Performance Windows Feature Experience Pack 120.2212.4170.0 Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel.: +49 (0)9127 9953 E-Mail: manfredwei@gmx.de Von: bugzilla_noreply@kde.org Gesendet: Dienstag, 1. Februar 2022 18:14 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #33 from caulier.gilles@gmail.com --- Hi, Look bug #443484 which is a duplicate. As i can see, some Windows 11 installation are problematic. Reverting to Windows 10 fix the problem. Here my Windows 11 VM (virtualbox) has no problem with digiKam... I must admit that i'm a little lost here... Gilles Caulier -- You are receiving this mail because: You reported the bug. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
And after the windows 10 update, you don't touch the digiKam install. Right ? What's happen to re-install it ? Gilles
Created attachment 146136 [details] attachment-19421-0.html No, I just clicked on the icon on the desktop. Now I will reinstall it, do I need to uninstall it first? Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel.: +49 (0)9127 9953 E-Mail: manfredwei@gmx.de Von: bugzilla_noreply@kde.org Gesendet: Dienstag, 1. Februar 2022 19:22 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #35 from caulier.gilles@gmail.com --- And after the windows 10 update, you don't touch the digiKam install. Right ? What's happen to re-install it ? Gilles -- You are receiving this mail because: You reported the bug. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
Re-installing will warn to uninstall it. The installer will do it for you. Gilles
Created attachment 146137 [details] attachment-19726-0.html Thank you, now i will try it Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel.: +49 (0)9127 9953 E-Mail: manfredwei@gmx.de Von: bugzilla_noreply@kde.org Gesendet: Dienstag, 1. Februar 2022 19:26 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #37 from caulier.gilles@gmail.com --- Re-installing will warn to uninstall it. The installer will do it for you. Gilles -- You are receiving this mail because: You reported the bug. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
Created attachment 146138 [details] A8A7F32FE2354B9EA7ACBEEC26934D82.png Look, what a message is coming!!! Digikam is running, but i canot see it. If ich open the Taskmanager, It seems, digiKam is running, wenn i now will install it, i must close digikam with the TaskManager Ok?? Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel.: +49 (0)9127 9953 E-Mail: manfredwei@gmx.de Von: bugzilla_noreply@kde.org Gesendet: Dienstag, 1. Februar 2022 19:26 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #37 from caulier.gilles@gmail.com --- Re-installing will warn to uninstall it. The installer will do it for you. Gilles -- You are receiving this mail because: You reported the bug. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
Created attachment 146139 [details] 222EF848665C45E7A6F48CB22875514D.png
Created attachment 146141 [details] attachment-21255-0.html I had ignore it, an than new installed, but it does not open Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel.: +49 (0)9127 9953 E-Mail: manfredwei@gmx.de Von: bugzilla_noreply@kde.org Gesendet: Dienstag, 1. Februar 2022 19:26 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #37 from caulier.gilles@gmail.com --- Re-installing will warn to uninstall it. The installer will do it for you. Gilles -- You are receiving this mail because: You reported the bug. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
If the installer said that digiKam already running, well a digikam.exe process must be present in memory. Right ? Gilles
Created attachment 146142 [details] attachment-21635-0.html how can i see it? Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel.: +49 (0)9127 9953 E-Mail: manfredwei@gmx.de Von: bugzilla_noreply@kde.org Gesendet: Dienstag, 1. Februar 2022 19:41 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #42 from caulier.gilles@gmail.com --- If the installer said that digiKam already running, well a digikam.exe process must be present in memory. Right ? Gilles -- You are receiving this mail because: You reported the bug. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
Created attachment 146143 [details] A219502D620940C58DBA88E77ACABBF3.png Ist it this: Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel.: +49 (0)9127 9953 E-Mail: manfredwei@gmx.de Von: bugzilla_noreply@kde.org Gesendet: Dienstag, 1. Februar 2022 19:41 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #42 from caulier.gilles@gmail.com --- If the installer said that digiKam already running, well a digikam.exe process must be present in memory. Right ? Gilles -- You are receiving this mail because: You reported the bug. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
Right click on Windows task bar and run process manager. Look if there is a digikam.exe on the list. https://www.minitool.com/news/how-to-open-task-manager-in-windows-11.html Gilles
Created attachment 146144 [details] 1C91C4F91E5C49AFAE3B9BB570BB7DDD.png Or this? Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel.: +49 (0)9127 9953 E-Mail: manfredwei@gmx.de Von: bugzilla_noreply@kde.org Gesendet: Dienstag, 1. Februar 2022 19:41 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #42 from caulier.gilles@gmail.com --- If the installer said that digiKam already running, well a digikam.exe process must be present in memory. Right ? Gilles -- You are receiving this mail because: You reported the bug. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
Created attachment 146145 [details] attachment-22346-0.html On the last Picture ist 3 x digiKam. Exe!! Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel.: +49 (0)9127 9953 E-Mail: manfredwei@gmx.de Von: bugzilla_noreply@kde.org Gesendet: Dienstag, 1. Februar 2022 19:46 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #45 from caulier.gilles@gmail.com --- Right click on Windows task bar and run process manager. Look if there is a digikam.exe on the list. https://www.minitool.com/news/how-to-open-task-manager-in-windows-11.html Gilles -- You are receiving this mail because: You reported the bug. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
If you force to install digiKam when a digikam.exe still running in memory (for ex as a zombie process), the digikam.exe will not be updated on file system. Of course, at run time, it will not work properly... Gilles
yes the 3 digikam.exe. force to close these instance from Process Manager, and re-install it. Gilles
Created attachment 146146 [details] 580A0ECDA58C4956B0C8026291576D10.png On top, where the apps, who are open, there ist no digikam, but down , Backgroundprozess, there ist threetimes digiKam Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel.: +49 (0)9127 9953 E-Mail: manfredwei@gmx.de Von: bugzilla_noreply@kde.org Gesendet: Dienstag, 1. Februar 2022 19:46 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #45 from caulier.gilles@gmail.com --- Right click on Windows task bar and run process manager. Look if there is a digikam.exe on the list. https://www.minitool.com/news/how-to-open-task-manager-in-windows-11.html Gilles -- You are receiving this mail because: You reported the bug. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
Created attachment 146147 [details] attachment-23078-0.html Ok i will try it Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel.: +49 (0)9127 9953 E-Mail: manfredwei@gmx.de Von: bugzilla_noreply@kde.org Gesendet: Dienstag, 1. Februar 2022 19:50 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #49 from caulier.gilles@gmail.com --- yes the 3 digikam.exe. force to close these instance from Process Manager, and re-install it. Gilles -- You are receiving this mail because: You reported the bug. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
Created attachment 146148 [details] ACFB054BACE34E1AB47A6285812818B7.png I tried twice, once with "End Task", then installed - no success. Then with "End process structure", the same result. I noticed that when I install a new program, it always appears at the top of the Windows "Start" window, but digiKam does not appear there. I have to look for it under the listing of all installed programs, there it is, but also from there it can not be opened. Here under „Zuletzt hinzugefügt“ should be digiKam Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel.: +49 (0)9127 9953 E-Mail: manfredwei@gmx.de Von: bugzilla_noreply@kde.org Gesendet: Dienstag, 1. Februar 2022 19:50 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #49 from caulier.gilles@gmail.com --- yes the 3 digikam.exe. force to close these instance from Process Manager, and re-install it. Gilles -- You are receiving this mail because: You reported the bug. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
Created attachment 146149 [details] attachment-28281-0.html Under this Link i found may be a solution https://www.deskmodder.de/blog/2021/11/03/windows-11-einige-apps-und-einstellungen-starten-nicht-kb5006746-hilft-teilweise/ Windows 11 Some apps and settings do not start - KB5006746 helps partially Author's avatar moinmoin November 3, 2021 08:03 Windows 11 9 Comments [Update 11/5/2021]: Microsoft has now provided KB5008295 for Windows 11, which fixes the problem with certificates and apps not starting. This also includes the Snipping Tool. [Original 3.11.21]: Not only in our Windows 11 forum some people complained that for example the Snipping Tool does not start. The reason for this is an expired certificate. The app First Steps, Touch Keyboard, Speech Input and the Emoji Panel are also affected. As well as the accounts page and settings. Here, however, only in S mode. The reason for this is an expired certificate. The fact that not everyone is affected is due to the fact that some had already installed KB5006746 as an optional update. The update renews the certificate. Others were "lucky" that Microsoft quickly withdrew the update for the apps and it was not yet installed. Those who should be affected can install the update. According to Microsoft, all problems are corrected except for the Snipping Tool. Here, it would only help to reset the date before October 31. However, that is certainly not exactly advantageous. Microsoft writes: "We are working on a solution and will keep you updated as soon as we have more information." Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel.: +49 (0)9127 9953 E-Mail: manfredwei@gmx.de Von: bugzilla_noreply@kde.org Gesendet: Dienstag, 1. Februar 2022 19:50 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #49 from caulier.gilles@gmail.com --- yes the 3 digikam.exe. force to close these instance from Process Manager, and re-install it. Gilles -- You are receiving this mail because: You reported the bug. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
Yes, it can be the origin of the problem. Important: digiKam is not signed and not notarized under Windows, as we need to pay for that. Until now, this do not trouble the Application. Gilles
Created attachment 146150 [details] attachment-29359-0.html can the problem be only with AMD? I try to load the driver mentioned here Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel.: +49 (0)9127 9953 E-Mail: manfredwei@gmx.de Von: bugzilla_noreply@kde.org Gesendet: Dienstag, 1. Februar 2022 20:38 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #54 from caulier.gilles@gmail.com --- Yes, it can be the origin of the problem. Important: digiKam is not signed and not notarized under Windows, as we need to pay for that. Until now, this do not trouble the Application. Gilles -- You are receiving this mail because: You reported the bug. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
Created attachment 146151 [details] attachment-30806-0.html I had installed the AMD-driver, but always the same problem Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel.: +49 (0)9127 9953 E-Mail: manfredwei@gmx.de Von: bugzilla_noreply@kde.org Gesendet: Dienstag, 1. Februar 2022 20:38 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #54 from caulier.gilles@gmail.com --- Yes, it can be the origin of the problem. Important: digiKam is not signed and not notarized under Windows, as we need to pay for that. Until now, this do not trouble the Application. Gilles -- You are receiving this mail because: You reported the bug. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
AMD CPU or video card ? Gilles
Created attachment 146157 [details] attachment-1096-0.html AMD Ryzen 5 PRO 4650G with Radeon Graphics 3.70 GHz I have installed digiKam 7.5 and also this does not start Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel.: +49 (0)9127 9953 E-Mail: manfredwei@gmx.de Von: bugzilla_noreply@kde.org Gesendet: Dienstag, 1. Februar 2022 20:53 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #57 from caulier.gilles@gmail.com --- AMD CPU or video card ? Gilles -- You are receiving this mail because: You reported the bug. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
I have a laptop here and updated to the latest Windows 10. digiKam is still running without problems. I see in your signature that you are using "Avast Antivirus Software". I would uninstall these. The Microsoft Defender is included in Windows 10, this is not the yellow of the egg either, but in many tests by computer magazines the Defender shows better detection than some paid antivirus solutions. From my daily practice I can say that Avast likes to "block" something and makes the system much slower. An AMD CPU or GPU will not be the cause here. I already see in many forums that digiKam is used on Windows 11. It must be related to your installation. Maik
Created attachment 146164 [details] attachment-22606-0.html Where of the world is the place where you are working? Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel.: +49 (0)9127 9953 E-Mail: manfredwei@gmx.de Von: bugzilla_noreply@kde.org Gesendet: Dienstag, 1. Februar 2022 20:53 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #57 from caulier.gilles@gmail.com --- AMD CPU or video card ? Gilles -- You are receiving this mail because: You reported the bug. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
Manfreid, I don't take a look about the AVAST note from your comments. Maik is right here. It's possible this AV block digikam.exe for an ...unknown reason... Please check first if AVAST report an error somewhere in logs. Also, disabling the AV to check if the application is blocked is the right way to do. Note : digiKam do not include a virus, it safe. It's not compiled under Windows, but on Linux for this security reason (it's my personal computer (:=))). Gilles
Created attachment 146166 [details] attachment-24427-0.html I have just uninstalled AVAST. After the restart digikam opened properly. However, I had not tried digiKam today before uninstalling AVAsT. Now it would be interesting to switch back to Windows 11. Do you think it could work there without AVAST? Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel.: +49 (0)9127 9953 E-Mail: manfredwei@gmx.de Von: bugzilla_noreply@kde.org Gesendet: Mittwoch, 2. Februar 2022 12:06 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #61 from caulier.gilles@gmail.com --- Manfreid, I don't take a look about the AVAST note from your comments. Maik is right here. It's possible this AV block digikam.exe for an ...unknown reason... Please check first if AVAST report an error somewhere in logs. Also, disabling the AV to check if the application is blocked is the right way to do. Note : digiKam do not include a virus, it safe. It's not compiled under Windows, but on Linux for this security reason (it's my personal computer (:=))). Gilles
>I have just uninstalled AVAST. >After the restart digikam opened properly. Great !!! >However, I had not tried digiKam today before uninstalling AVAsT. >Now it would be interesting to switch back to Windows 11. >Do you think it could work there without AVAST? yes, 95% sure. It will be interresting to use MS defender instead Avast to see if problem is back. Just to be sure. Best Gilles
Created attachment 146170 [details] attachment-27459-0.html I will try it in the afternoon, or morning, because the Change to Windows 11 needs some Hours Thank you very much Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel.: +49 (0)9127 9953 E-Mail: manfredwei@gmx.de Von: bugzilla_noreply@kde.org Gesendet: Mittwoch, 2. Februar 2022 12:39 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] windows 11 digikam 7.2 or 7.3 does not start https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #63 from caulier.gilles@gmail.com --- >I have just uninstalled AVAST. >After the restart digikam opened properly. Great !!! >However, I had not tried digiKam today before uninstalling AVAsT. >Now it would be interesting to switch back to Windows 11. >Do you think it could work there without AVAST? yes, 95% sure. It will be interresting to use MS defender instead Avast to see if problem is back. Just to be sure. Best Gilles
Created attachment 146171 [details] attachment-28459-0.html Now I have a problem again, digikam I can open only after I made a restart. If I close digiKam and later want to open it again it does not work again?????? Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel.: +49 (0)9127 9953 E-Mail: manfredwei@gmx.de Von: bugzilla_noreply@kde.org Gesendet: Mittwoch, 2. Februar 2022 12:45 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] Windows 10/11 : digiKam 7.2 or 7.3 does notstart (AVAST suspected) https://bugs.kde.org/show_bug.cgi?id=443471 caulier.gilles@gmail.com changed: What |Removed |Added ---------------------------------------------------------------------------- Summary|Windows 10/11 :digiKam 7.2 |Windows 10/11 : digiKam 7.2 |or 7.3 does not start | or 7.3 does not start |(AVAST suspected) |(AVAST suspected)
Created attachment 146172 [details] attachment-29164-0.html I can digiKam start only one time after Restart. If i close digikam and try to start it again, it does not work Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel.: +49 (0)9127 9953 E-Mail: manfredwei@gmx.de Von: bugzilla_noreply@kde.org Gesendet: Mittwoch, 2. Februar 2022 12:45 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] Windows 10/11 : digiKam 7.2 or 7.3 does notstart (AVAST suspected) https://bugs.kde.org/show_bug.cgi?id=443471 caulier.gilles@gmail.com changed: What |Removed |Added ---------------------------------------------------------------------------- Summary|Windows 10/11 :digiKam 7.2 |Windows 10/11 : digiKam 7.2 |or 7.3 does not start | or 7.3 does not start |(AVAST suspected) |(AVAST suspected)
When you close digiKam, wait a little bit, and check if digikam.exe still in memory. If yes, this want mean that application is not closed properly. This is why you cannot start it again. It's another problem. Gilles
Created attachment 146182 [details] attachment-913-0.html Dear Gilles, I'm afraid I've lost digiKam. When I opened another program after restarting, digiKam no longer opens. And doing an extra restart every time is certainly not the solution. I'll leave it installed, switch to Windows 11 and then work with Adobe Elements Organizer. (I don't like it that much, but it works). I will always try digiKam in between. If you find a solution, I'd love to hear from you. Thanks so much for your help, I appreciated you taking the time to do this. All the best Manfred Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel.: +49 (0)9127 9953 E-Mail: manfredwei@gmx.de Von: bugzilla_noreply@kde.org Gesendet: Mittwoch, 2. Februar 2022 12:56 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] Windows 10/11 : digiKam 7.2 or 7.3 does notstart (AVAST suspected) https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #67 from caulier.gilles@gmail.com --- When you close digiKam, wait a little bit, and check if digikam.exe still in memory. If yes, this want mean that application is not closed properly. This is why you cannot start it again. It's another problem. Gilles
Created attachment 146487 [details] attachment-30100-0.html Dear Gilles, a very joyful news!!! digikam runs with me again-- flawlessly and as good as never!!! How did that happen? I gave my PC a new M.2 SSD NVME and reinstalled Windows 11 there. From the ISO. No upgrade, not cloned. However, I then had to reinstall all my programs, including digikam. But with what success. Great. by the new SSD everything runs faster and much more stable (possibly also by WIN 11). So it was not digikam, but somewhere on my PC. One thing though I can't get right in digikam: Find duplicates . Even if I have intentionally copied and pasted a picture (with a different file name) I don't get any duplicates. Do I have to search for all fingerprints first? But that takes a very, very long time, even with a few hundred images. Can you tell me how to do that? Thanks a lot Greetings manfred Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel.: 09127 9953 E-Mail: manfredwei@gmx.de
Hi, Great to hear that run time is now fixed under your Windows 11 computer. About Fuzzy searches, yes, it needs to compute finger-prints to process similarity jobs. Yes it's time consuming, but since 7.3.0 if i remember, paralelized tasks must be operate on multi-core computer. What's the CPU idle during finger-print calculations ? Best Gilles Caulier
Created attachment 146497 [details] attachment-16704-0.html Hi, it‘s s between 3 and 12 % Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel.: 09127 9953 E-Mail: manfredwei@gmx.de Von: bugzilla_noreply@kde.org Gesendet: Mittwoch, 9. Februar 2022 12:12 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] Windows 10/11 : digiKam 7.2 or 7.3 does notstart (AVAST suspected) https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #70 from caulier.gilles@gmail.com --- Hi, Great to hear that run time is now fixed under your Windows 11 computer. About Fuzzy searches, yes, it needs to compute finger-prints to process similarity jobs. Yes it's time consuming, but since 7.3.0 if i remember, paralelized tasks must be operate on multi-core computer. What's the CPU idle during finger-print calculations ? Best Gilles Caulier
Created attachment 146498 [details] attachment-17645-0.html Now for a Moment 25% mostly less than 10% Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel.: 09127 9953 E-Mail: manfredwei@gmx.de Von: bugzilla_noreply@kde.org Gesendet: Mittwoch, 9. Februar 2022 12:12 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] Windows 10/11 : digiKam 7.2 or 7.3 does notstart (AVAST suspected) https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #70 from caulier.gilles@gmail.com --- Hi, Great to hear that run time is now fixed under your Windows 11 computer. About Fuzzy searches, yes, it needs to compute finger-prints to process similarity jobs. Yes it's time consuming, but since 7.3.0 if i remember, paralelized tasks must be operate on multi-core computer. What's the CPU idle during finger-print calculations ? Best Gilles Caulier
Created attachment 146500 [details] 122539B08A4E48D9A445F6A8663CAF82.png Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel.: 09127 9953 E-Mail: manfredwei@gmx.de Von: bugzilla_noreply@kde.org Gesendet: Mittwoch, 9. Februar 2022 12:12 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] Windows 10/11 : digiKam 7.2 or 7.3 does notstart (AVAST suspected) https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #70 from caulier.gilles@gmail.com --- Hi, Great to hear that run time is now fixed under your Windows 11 computer. About Fuzzy searches, yes, it needs to compute finger-prints to process similarity jobs. Yes it's time consuming, but since 7.3.0 if i remember, paralelized tasks must be operate on multi-core computer. What's the CPU idle during finger-print calculations ? Best Gilles Caulier
Created attachment 146501 [details] 5D4341E763AC4B4BAFA82BDE0A625E94.png First i want to look for a example only in one Album with 12 fotos and two dublicates. And it seems digikam was Looking for my Pictures . Now i click to „the whole albumsammlung“ and it was very quick to Show me a lot of Fotos. Now i will Control the result. Manfred Weidenmüller Blumenstraße 6 D-90574 Roßtal Tel.: 09127 9953 E-Mail: manfredwei@gmx.de Von: bugzilla_noreply@kde.org Gesendet: Mittwoch, 9. Februar 2022 12:12 An: manfredwei@gmx.de Betreff: [digikam] [Bug 443471] Windows 10/11 : digiKam 7.2 or 7.3 does notstart (AVAST suspected) https://bugs.kde.org/show_bug.cgi?id=443471 --- Comment #70 from caulier.gilles@gmail.com --- Hi, Great to hear that run time is now fixed under your Windows 11 computer. About Fuzzy searches, yes, it needs to compute finger-prints to process similarity jobs. Yes it's time consuming, but since 7.3.0 if i remember, paralelized tasks must be operate on multi-core computer. What's the CPU idle during finger-print calculations ? Best Gilles Caulier
Ok, thanks for this long story. I close this file now... Gilles