SUMMARY A wonderful part of KStars/Ekos is its simulator. Here we can learn how to handle the different modules during day time and cloudy nights. Wonderful. Usually I set my simulator modules with the same parameters as for my real equipment. The annoying part is that I must reset most of these parameters each time : I couldn't find a way to save my simulator settings. Would it be possible to plan this ? Thanks STEPS TO REPRODUCE 1. 2. 3. OBSERVED RESULT EXPECTED RESULT SOFTWARE/OS VERSIONS Windows: MacOS: Linux/KDE Plasma: (available in About System) KDE Plasma Version: KDE Frameworks Version: Qt Version: ADDITIONAL INFORMATION
INDI Control Panel --> Options --> Configuration --> Save This does not work?
There is no problem saving the settings in the INDI Control Panel. I was talking about saving the settings in EKOS. For instance, I have a color camera (thus no filter wheel). I can set this in the field FW of the EKOS Capture Module. If I quit KStars and reopen it, the field FW is set again to CCD Simulator.
The same for the Limit Settings, etc...
I just found that the 4 Limit Settings in the Capture Module (i.e. Guiding Deviation, Autofocus if HFR>, Refocus every, Meridian Flip) are saved after a job has been recorded. They are not saved after a Preview. The other options are never saved. It would be nice to have a Save button on each module
The same applies to the Focus settings in the Focuser Module : The focus settings are saved only if an Autofocus has been executed except (Focuser/Steps) and (CCD & Filter Wheel/FW)
Please check 3.3.4
I will as soon as the dmg will be available. Thank you !
I tested the last Kstars v. 3.3.4 using the simulator : - in the Observatory panel : very handy CW and CCW buttons which can be stopped on a clic; I couldn't make work the new Move (rel) button. That panel is getting richer. - in the Focus panel : the focus settings are now saved (Bin, Exp, FW, Box Size, etc) - in the CCD panel : the Limits Settings are now saved (Guiding Deviation, Autofocus if HFR>, Refocus every). The sensor size is not displayed to its default value (in my case 4656x3520). The FW is not saved. You've done a beautiful job !
Dear Bug Submitter, This bug has been in NEEDSINFO status with no change for at least 15 days. Please provide the requested information as soon as possible and set the bug status as REPORTED. Due to regular bug tracker maintenance, if the bug is still in NEEDSINFO status with no change in 30 days the bug will be closed as RESOLVED > WORKSFORME due to lack of needed information. For more information about our bug triaging procedures please read the wiki located here: https://community.kde.org/Guidelines_and_HOWTOs/Bug_triaging If you have already provided the requested information, please mark the bug as REPORTED so that the KDE team knows that the bug is ready to be confirmed. Thank you for helping us make KDE software even better for everyone!