Hello, i would like to control my Celestron 4se with kstars instead Skysafari over Celestron SkyPortal Wifi Modul. I can connect if i use a cabel connection with Celestron Nexstar/GPS Driver but CANNOT if i try via wifi to my Celestron SkyPortal Wifi Modul to his IP Number. It works fine with Skysafari, so i know the problem is the Celestron Nextstar Driver from kstars/Ekos. I tried older and newer vesion of the Driver and kstars its the same problem. After just 5-10 seconds after it tries connecting, it stops with an Timeouterror!(See Logfile Output down below). However if i try the EQMod Mount Driver kstars/ekos CAN connect to SkyPoral Wifi Modul, but i cant move the Telescope because its the wrong TelesopeDriver i suppose. But the fact that i can connect means that the Celestron Nexstar Driver could work, if it would be fixed, because how the EQMod Mount Driver successfully connects per IP over Wifi to the SkyPortal Wifi Modul. Also I tried a false IP with the EQMod Mount Driver and the connection failed, so the EQMod Mount Driver does successfully work with SkyPortal Wifi Modul(See Logfile down below). Please update the Celestron Nexstar or GPS Driver so it can connect to Telescope via Celestron SkyPortal Wifi Modul! Thank you very much for your work and kstars/ekos is a good software! Logfile with failed connection with Celestron Nextar Driver: [2018-01-25T00:15:23.576 Mitteleuropäische Zeit DEBG ][ org.kde.kstars.indi] - Celestron NexStar : "Connecting to 192.175.11.36@2000 ... " [2018-01-25T00:15:23.619 Mitteleuropäische Zeit DEBG ][ org.kde.kstars.indi] - Celestron NexStar : "Connection successful, attempting handshake... " [2018-01-25T00:15:33.729 Mitteleuropäische Zeit DEBG ][ org.kde.kstars.indi] - Celestron NexStar : "Failed to communicate with the mount, check the logs for details. " [2018-01-25T00:15:33.771 Mitteleuropäische Zeit DEBG ][ org.kde.kstars.indi] - Celestron NexStar : "Handshake failed. " [2018-01-25T00:15:33.779 Mitteleuropäische Zeit DEBG ][ org.kde.kstars.ekos] - Celestron NexStar is disconnected. [2018-01-25T00:15:33.779 Mitteleuropäische Zeit INFO ][ org.kde.kstars.ekos] - "Celestron NexStar ist nicht verbunden." Logfile successful connection with EQMod Mount Driver: [2018-01-25T00:32:53.703 Mitteleuropäische Zeit DEBG ][ org.kde.kstars.indi] - EQMod Mount : "Connecting to 192.175.11.36@2000 ... " [2018-01-25T00:32:53.746 Mitteleuropäische Zeit DEBG ][ org.kde.kstars.indi] - EQMod Mount : "Warning: Invalid command -> Invalid response to command :e1 - Reply :e1 " [2018-01-25T00:32:53.747 Mitteleuropäische Zeit DEBG ][ org.kde.kstars.indi] - EQMod Mount : "EQMod Mount is online. " [2018-01-25T00:32:53.747 Mitteleuropäische Zeit INFO ][ org.kde.kstars.ekos] - EQMod Mount is connected. [2018-01-25T00:32:53.748 Mitteleuropäische Zeit DEBG ][ org.kde.kstars.ekos] - 1 devices connected out of 2 [2018-01-25T00:32:53.809 Mitteleuropäische Zeit DEBG ][ org.kde.kstars.indi] - < EQMod Mount >: < ON_COORD_SET > [2018-01-25T00:32:53.815 Mitteleuropäische Zeit DEBG ][ org.kde.kstars.indi] - < EQMod Mount >: < EQUATORIAL_EOD_COORD > [2018-01-25T00:32:53.816 Mitteleuropäische Zeit INFO ][ org.kde.kstars.ekos] - "EQMod Mount ist verbunden."
I use: raspberry 3pi, UbuntuMate 16.04, kstars/ekos 2.8.9, DSLR camera nikon5600 bulb via usb(&extern USB hub for power), Celestron 4se Telescope, Celestron StarSense Autoalign, Celestron SkyPortal Wifi Modul(at moment via cabel/usb because kstars doesn't connect to Skyportal)
My initial guess is that perhaps the SkyPortal WiFi module does not recognize the "handshake" command used for cabled setups and so it times out. Try one thing, use telnet to connect to it from Ubuntu telnet 192.175.11.36@2000 Once you're in, just type V and then press enter. If you responds, then it works fine. After that, try to type Kx and then press enter and see what response you get.
Need more information as pointed out in the last comment.
Dear Bug Submitter, This bug has been in NEEDSINFO status with no change for at least 15 days. Please provide the requested information as soon as possible and set the bug status as REPORTED. Due to regular bug tracker maintenance, if the bug is still in NEEDSINFO status with no change in 30 days, the bug will be closed as RESOLVED > WORKSFORME due to lack of needed information. For more information about our bug triaging procedures please read the wiki located here: https://community.kde.org/Guidelines_and_HOWTOs/Bug_triaging If you have already provided the requested information, please set the bug status as REPORTED so that the KDE team knows that the bug is ready to be confirmed. Thank you for helping us make KDE software even better for everyone!
Dear Bug Submitter, This bug has been in NEEDSINFO status with no change for at least 30 days. The bug is now closed as RESOLVED > WORKSFORME due to lack of needed information. For more information about our bug triaging procedures please read the wiki located here: https://community.kde.org/Guidelines_and_HOWTOs/Bug_triaging Thank you for helping us make KDE software even better for everyone!