Devices ----------------------- TSSTcorp CDDVDW SE-S084B TS00 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R doppelschichtig, DVD+R, DVD+RW, DVD+R doppelschichtig) [DVD-ROM, DVD-R sequenziell, Zweischichtige DVD-R sequenziell, Zweischicht-DVD-R-Sprung, DVD-RAM, DVD-RW Eingeschränktes Überbrennen, DVD-RW sequenziell, DVD+RW, DVD+R, Zweischichtige DVD+R, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Eingeschränktes Überschreiben, Sprung zwischen DVD-Schichten] [%7] System ----------------------- K3b Version: 2.0.3 KDE Version: 4.14.25 QT Version: 4.8.6 Kernel: 4.4.49-16-default Used versions ----------------------- cdrecord: 3.1 cdrecord ----------------------- cdrecord: Die Operation ist nicht erlaubt. Warning: Cannot raise RLIMIT_MEMLOCK limits. cdrecord: Nicht genügend Hauptspeicher verfügbar. WARNING: Cannot do mlockall(2). !!!!!!!!!!! It's enave Mem or disk space cdrecord: WARNING: This causes a high risk for buffer underruns. cdrecord: Die Operation ist nicht erlaubt. WARNING: Cannot set RR-scheduler. cdrecord: Keine Berechtigung. WARNING: Cannot set priority using setpriority(). cdrecord: WARNING: This causes a high risk for buffer underruns. cdrecord: Insufficient 'file read' privileges. You will not be able to open all needed devices. cdrecord: Insufficient 'file write' privileges. You will not be able to open all needed devices. cdrecord: Insufficient 'device' privileges. You may not be able to send all needed SCSI commands, this my cause various unexplainable problems. cdrecord: Insufficient 'memlock' privileges. You may get buffer underruns. cdrecord: Insufficient 'priocntl' privileges. You may get buffer underruns. cdrecord: Insufficient 'network' privileges. You will not be able to do remote SCSI. scsidev: '/dev/sr0' devname: '/dev/sr0' scsibus: -2 target: -2 lun: -2 Warning: Open by 'devname' is unintentional and not supported. Linux sg driver version: 3.5.27 SCSI buffer size: 64512 cdrecord: Warning: Cannot read drive buffer. cdrecord: Warning: The DMA speed test has been skipped. Text len: 324 Cdrecord-ProDVD-ProBD-Clone 3.01 (x86_64-unknown-linux-gnu) Copyright (C) 1995-2015 Joerg Schilling TOC Type: 0 = CD-DA Using libscg version 'schily-0.9'. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 3 Capabilities : Vendor_info : 'TSSTcorp' Identifikation : 'CDDVDW SE-S084B ' Revision : 'TS00' Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. Current: CD-R Profile: DVD-R/DL sequential recording Profile: DVD-R/DL layer jump recording Profile: DVD+R/DL Profile: DVD+R Profile: DVD+RW Profile: DVD-RW sequential recording Profile: DVD-RW restricted overwrite Profile: DVD-RAM Profile: DVD-R sequential recording Profile: DVD-ROM Profile: CD-RW Profile: CD-R (current) Profile: CD-ROM Profile: Removable Disk Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1962752 = 1916 KB FIFO size : 4194304 = 4096 KB Encoding speed : 905x (67814 sectors/s) for libedc from Heiko Eissfeldt cdrecord: Die Operation ist nicht erlaubt. rezero unit: scsi sendcmd: fatal error CDB: 01 00 00 00 00 00 cdrecord: Die Operation ist nicht erlaubt. Cannot send SCSI cmd via ioctl. cdrecord: Die Operation ist nicht erlaubt. Cannot open or use SCSI driver. cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root. cdrecord: For possible transport specifiers try 'cdrecord dev=help'. pregap1: -1 Track 01: audio 158 MB (15:43.96) no preemp Track 02: audio 17 MB (01:46.98) no preemp pregapsize: 0 Track 03: audio 48 MB (04:50.92) no preemp pregapsize: 0 Track 04: audio 65 MB (06:31.04) no preemp pregapsize: 0 Track 05: audio 69 MB (06:51.88) no preemp pregapsize: 0 Track 06: audio 31 MB (03:05.36) no preemp pregapsize: 0 Track 07: audio 175 MB (17:20.96) no preemp pregapsize: 0 Track 08: audio 18 MB (01:48.58) no preemp pregapsize: 0 Track 09: audio 47 MB (04:43.16) no preemp pregapsize: 0 Total size: 633 MB (62:42.85) = 282214 sectors Lout start: 633 MB (62:44/64) = 282214 sectors cdrecord command: ----------------------- /usr/bin/cdrecord -v gracetime=2 dev=/dev/sr0 speed=24 -raw96r driveropts=burnfree textfile=/tmp/qt_temp.tL7443 -useinfo -audio -shorttrack /tmp/kde-rb/Marbles In The Park CD 1/Track01.wav /tmp/kde-rb/Marbles In The Park CD 1/Track02.wav /tmp/kde-rb/Marbles In The Park CD 1/Track03.wav /tmp/kde-rb/Marbles In The Park CD 1/Track04.wav /tmp/kde-rb/Marbles In The Park CD 1/Track05.wav /tmp/kde-rb/Marbles In The Park CD 1/Track06.wav /tmp/kde-rb/Marbles In The Park CD 1/Track07.wav /tmp/kde-rb/Marbles In The Park CD 1/Track08.wav /tmp/kde-rb/Marbles In The Park CD 1/Track09.wav
Hi Rudolf, I am maintaining k3b for KF5 right now https://github.com/KDE/k3b it will be released as KDE Applications 17.04.0 soon! but v2.0.3 was not be maintained any more! Regards, Leslie Zhai
Hi Rudolf, You can use CDEmu to test http://www.leetcode.cn/2016/08/k3b.html#test for saving your CD. and please try cdrtools http://cdrtools.sourceforge.net/private/cdrecord.html instead of cdrkit (unmaintained) http://www.leetcode.cn/2016/08/k3b.html#bug Regards, Leslie Zhai
Hi Leslie, thanks for your help . Greetings from Germany, Freiburg Rudolf Am 14.03.2017 um 08:07 schrieb Leslie Zhai: > https://bugs.kde.org/show_bug.cgi?id=377497 > > --- Comment #2 from Leslie Zhai <xiangzhai83@gmail.com> --- > Hi Rudolf, > > You can use CDEmu to test http://www.leetcode.cn/2016/08/k3b.html#test for > saving your CD. > and please try cdrtools http://cdrtools.sourceforge.net/private/cdrecord.html > instead of cdrkit (unmaintained) http://www.leetcode.cn/2016/08/k3b.html#bug > > Regards, > Leslie Zhai >
Thank you for reporting this issue in KDE software. As it has been a while since this issue was reported, can we please ask you to see if you can reproduce the issue with a recent software version? If you can reproduce the issue, please change the status to "REPORTED" when replying. Thank you!
Dear Bug Submitter, This bug has been in NEEDSINFO status with no change for at least 15 days. Please provide the requested information as soon as possible and set the bug status as REPORTED. Due to regular bug tracker maintenance, if the bug is still in NEEDSINFO status with no change in 30 days the bug will be closed as RESOLVED > WORKSFORME due to lack of needed information. For more information about our bug triaging procedures please read the wiki located here: https://community.kde.org/Guidelines_and_HOWTOs/Bug_triaging If you have already provided the requested information, please mark the bug as REPORTED so that the KDE team knows that the bug is ready to be confirmed. Thank you for helping us make KDE software even better for everyone!
This bug has been in NEEDSINFO status with no change for at least 30 days. The bug is now closed as RESOLVED > WORKSFORME due to lack of needed information. For more information about our bug triaging procedures please read the wiki located here: https://community.kde.org/Guidelines_and_HOWTOs/Bug_triaging Thank you for helping us make KDE software even better for everyone!