Hi. So I purchased a graphics tablet model PTH-651/K and its basic functions are working, ie pressure sensitivity, eraser, tilt, pen buttons, touch wheel, and touch pad. However I cannot configure the tablet's nine buttons and the touch wheel functions. When I plug in the tablet it detects it, but as it tries to load the default profiles, I get error notifications and although it picks up the name of the model there are no settings to configure the model-specific functions. Screen: http://s33.postimg.org/92o9fb4kt/wacomissue0.png As I try to create a new profile for the settings, it doesn't work and spits out the same error messages. Screens: http://s33.postimg.org/krsra6oz1/wacomissue1.png http://s33.postimg.org/d3ouv1bl9/wacomissue2.png I have a Bamboo tablet which works perfectly, so I'm not sure why this Intuos isn't detected by the system settings properly. $ xsetwacom --list devices Wacom Intuos Pro M Pen stylus id: 12 type: STYLUS Wacom Intuos Pro M Pen eraser id: 13 type: ERASER Wacom Intuos Pro M Pen cursor id: 16 type: CURSOR Wacom Intuos Pro M Pen pad id: 17 type: PAD Wacom Intuos Pro M Finger touch id: 18 type: TOUCH Reproducible: Always Steps to Reproduce: 1. Plug the tablet in. 2. Try to configure. Actual Results: Error messages. Expected Results: Device functions detected properly and can create settings profiles for it.
$ dmesg | grep -i wacom [10895.308818] usb 1-2: Manufacturer: Wacom Co.,Ltd. [10896.435918] input: Wacom Intuos Pro M Pen as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input23 [10896.436299] input: Wacom Intuos Pro M Finger as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/input/input24 [10896.436402] usbcore: registered new interface driver wacom [10995.429096] wacom 1-2:1.0: wacom_sys_irq - usb_submit_urb failed with result -19 [10995.430077] wacom 1-2:1.1: wacom_sys_irq - usb_submit_urb failed with result -19 [11004.241082] usb 1-2: Manufacturer: Wacom Co.,Ltd. [11005.240337] input: Wacom Intuos Pro M Pen as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input25 [11005.241191] input: Wacom Intuos Pro M Finger as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/input/input26 [11068.146618] wacom 1-2:1.0: wacom_sys_irq - usb_submit_urb failed with result -19 [11068.146640] wacom 1-2:1.1: wacom_sys_irq - usb_submit_urb failed with result -19 [11072.787588] usb 1-2: Manufacturer: Wacom Co.,Ltd. [11073.786646] input: Wacom Intuos Pro M Pen as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input27 [11073.787466] input: Wacom Intuos Pro M Finger as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/input/input28 [11114.024708] wacom 1-2:1.1: wacom_sys_irq - usb_submit_urb failed with result -19 [11119.328825] usb 1-2: Manufacturer: Wacom Co.,Ltd. [11120.327838] input: Wacom Intuos Pro M Pen as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input29 [11120.328577] input: Wacom Intuos Pro M Finger as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/input/input30