I'm running opensuse 13.2 on a Medion Akoya Model E7416. While I have no problems to run any scanning backend on older computers no scanning is possible with any of the backends I've tried i.e. Kooka, xsane, scanlite. However, the symptoms vary. While Kooka recognizes the scanner and opens the GUI (although very slowly), xsane reports ' no scanner found' and scanlite similarly. When I select a preview scan in Kooka it reacts on the screen without the scanner giving the familiar sound when warming up. xsane does not open its GUI but does so when I disconnect the scanner. lsusb reports the scanner. There is no difference in behaviour between USB 2 and USB 3 ports. Reproducible: Always Steps to Reproduce: 1. Scanner is running and connected. Start Kooka 2.Window with name of the detected scanner shows up (Epson Perfection 1260Photo 3. Kooka is building up but it takes at least a minute before the 'Scan', 'Preview' buttons appear 4. Pressing 'Preview' or 'Scan' blocks the screen but nothing is happening 5. After about a minute the screen is active again but nothing has happened Actual Results: The scanner hasn't worked, no preview available, no scanned image available Expected Results: It should have started the scanner and produced a preview or an image.
Thank you for reporting this bug in KDE software. As it has been a while since this issue was reported, can we please ask you to see if you can reproduce the issue with a recent software version? If you can reproduce the issue, please change the status to "CONFIRMED" when replying. Thank you!
Dear Bug Submitter, This bug has been in NEEDSINFO status with no change for at least 15 days. Please provide the requested information as soon as possible and set the bug status as REPORTED. Due to regular bug tracker maintenance, if the bug is still in NEEDSINFO status with no change in 30 days the bug will be closed as RESOLVED > WORKSFORME due to lack of needed information. For more information about our bug triaging procedures please read the wiki located here: https://community.kde.org/Guidelines_and_HOWTOs/Bug_triaging If you have already provided the requested information, please mark the bug as REPORTED so that the KDE team knows that the bug is ready to be confirmed. Thank you for helping us make KDE software even better for everyone!
This bug has been in NEEDSINFO status with no change for at least 30 days. The bug is now closed as RESOLVED > WORKSFORME due to lack of needed information. For more information about our bug triaging procedures please read the wiki located here: https://community.kde.org/Guidelines_and_HOWTOs/Bug_triaging Thank you for helping us make KDE software even better for everyone!