I can use both monitors and their position are correct but in the native notebook monitor plasma desktop didnt cover it, its a black screen, windows and mouse can be put in the black monitor too. Reproducible: Always Steps to Reproduce: 1. hyibrid nvidia intel systems (dell xps l502x) 2. have nvidia-prime with nvidia-340 drive 3. using HDMI port Expected Results: two plasma sections It works correctly in displayport wired to intel
I belive it is a plasma problem involving Nvidia Twinview. I tried setting it manualy in xrandr (even if aparently kde display configuration detect and can define position and orientation of both monitors), but still KDE can't notice it need to put a plasma screen on left monitor. xrandr give this: Screen 0: minimum 8 x 8, current 2560 x 1080, maximum 16384 x 16384 HDMI-0 connected primary 2560x1080+0+0 (normal left inverted right x axis y axis) 677mm x 290mm 2560x1080 60.0*+ 1920x1080 60.0 59.9 50.0 30.0 60.1 60.0 50.0 1680x1050 60.0 1600x900 60.0 1280x1024 75.0 60.0 1280x720 60.0 59.9 50.0 1152x864 75.0 1024x768 75.0 60.0 800x600 75.0 60.3 720x576 50.0 720x480 59.9 640x480 75.0 59.9 59.9 LVDS1 connected 1920x1080+0+0 344mm x 193mm 1920x1080 60.0*+ 59.9 1680x1050 60.0 59.9 1600x1024 60.2 1400x1050 60.0 1280x1024 60.0 1440x900 59.9 1280x960 60.0 1360x768 59.8 60.0 1152x864 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 DP1 disconnected HDMI1 disconnected VGA1 disconnected VIRTUAL1 disconnected 1680x1050 (0x2ce) 146.2MHz h: width 1680 start 1784 end 1960 total 2240 skew 0 clock 65.3KHz v: height 1050 start 1053 end 1059 total 1089 clock 60.0Hz 1280x1024 (0x2d1) 108.0MHz h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz 1024x768 (0x2d7) 65.0MHz h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz v: height 768 start 771 end 777 total 806 clock 60.0Hz 800x600 (0x2d9) 40.0MHz h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz v: height 600 start 601 end 605 total 628 clock 60.3Hz 640x480 (0x2dd) 25.2MHz h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz v: height 480 start 490 end 492 total 525 clock 59.9Hz
Hello! This bug report was filed for KDE Plasma 4, which reached end-of-support status in August 2015. KDE Plasma 5's desktop shell has been almost completely rewritten for better performance and usability, so it is likely that this bug has already been resolved in Plasma 5. Accordingly, we hope you understand why we must close this bug report. If the issue described here is still present in KDE Plasma 5.12 or later, please feel free to open a new ticket in the "plasmashell" product after reading https://community.kde.org/Get_Involved/Bug_Reporting If you would like to get involved in KDE's bug triaging effort so that future mass bug closes like this are less likely, please read https://community.kde.org/Get_Involved#Bug_Triaging Thanks for your understanding! Nate Graham