Refer attached log issue appears in K3B and Brasero/Nautilus where gowisofs reports Executing 'builtin_dd if=/dev/fd/0 of=/dev/sr0 obs=32k seek=0' /dev/sr0: pre-formatting blank BD-RE for 24.8GB... /dev/sr0: "Current Write Speed" is 2.0x4390KBps. 0/18498191360 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0% === last message repeated 17 times. === :-[ WRITE@LBA=0h failed with SK=0h/ASC=00h/ACQ=03h]: Input/output error :-( write failed: Input/output error System Intel P4304CR2..... using dual E5-2650 v2 cpus and LG BH14NS40 drive using Verbatim BD-RE 25GB 180 disks. Burner LG HL-DT-ST - BD-RE BH14NS40 1st try complete 55% of disk then io write error. Thereafter all other tries with new disks only reached 0.18%. After that it became to expensive to burn more disks. Gave up. Reproducible: Always Steps to Reproduce: 1. 19 GB tar file to be burned into data project 2. Insert disk 3. Burn disk 4. Except for first time ever when burned 55% thereafter stops at 0.18% 5. Repeatable Actual Results: Per log files: :-( write failed: Input/output error Expected Results: COmpletion of Bluray burn. BUrner and K3B works fine with any DVDs Burner and K3B works fine with any DVDs. FUrther noticed during 55 % burn, using dolphin, moved another file. This result in the buring file being copied to that location even though I selected a completely different file.
Thank you for the bug report. As this report hasn't seen any changes in 5 years or more, we ask if you can please confirm that the issue still persists. If this bug is no longer persisting or relevant please change the status to resolved.