User-Agent:       Mozilla/5.0 (X11; Linux i686) AppleWebKit/535.19 (KHTML, like Gecko) Chrome/18.0.1025.142 Safari/535.19
Build Identifier: 

Devices
-----------------------
HL-DT-ST DVD-RAM GH22LP21 1.00 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] [%7]

System
-----------------------
K3b Version: 2.0.2
KDE Version: 4.7.4 (4.7.4)
QT Version:  4.7.4
Kernel:      3.0.0-17-generic

Used versions
-----------------------
cdrecord: 1.1.11

cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 0 = CD-DA
Driveropts: 'burnfree'
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identification : 'DVD-RAM GH22LP21'
Revision       : '1.00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x0012 (DVD-RAM) 
Profile: 0x002B (DVD+R/DL) 
Profile: 0x001B (DVD+R) 
Profile: 0x001A (DVD+RW) 
Profile: 0x0016 (DVD-R/DL layer jump recording) 
Profile: 0x0015 (DVD-R/DL sequential recording) 
Profile: 0x0014 (DVD-RW sequential recording) 
Profile: 0x0013 (DVD-RW restricted overwrite) 
Profile: 0x0011 (DVD-R sequential recording) 
Profile: 0x0010 (DVD-ROM) 
Profile: 0x000A (CD-RW) 
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM) 
Profile: 0x0002 (Removable disk) 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1114112 = 1088 KB
FIFO size      : 12582912 = 12288 KB
Encoding speed : 964x (72289 sectors/s) for libedc from Heiko Ei�feldt
Speed set to 8468 KB/s
pregap1: -1
Track 01: audio   33 MB (03:17.09) no preemp     
Track 02: audio   40 MB (03:59.41) no preemp      pregapsize:   0
Track 03: audio   34 MB (03:23.14) no preemp      pregapsize:   0
Track 04: audio   35 MB (03:30.14) no preemp      pregapsize:   0
Track 05: audio   34 MB (03:24.74) no preemp      pregapsize:   0
Track 06: audio   42 MB (04:15.52) no preemp      pregapsize:   0
Track 07: audio   38 MB (03:48.24) no preemp      pregapsize:   0
Track 08: audio   41 MB (04:09.24) no preemp      pregapsize:   0
Track 09: audio   44 MB (04:23.40) no preemp      pregapsize:   0
Track 10: audio   25 MB (02:33.66) no preemp      pregapsize:   0
Total size:      370 MB (36:44.61) = 165346 sectors
Lout start:      371 MB (36:46/46) = 165346 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, high Beta category (A+) (3)
  ATIP start of lead in:  -11634 (97:26/66)
  ATIP start of lead out: 359846 (79:59/71)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 194500
Starting to write CD/DVD at speed  48.0 in real RAW/RAW96R mode for single session.
Last chance to quit, starting real write in    2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
/usr/bin/wodim: WARNING: Drive returns wrong startsec (0) using -11634 from ATIP
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 FF FF D2 8E 00 00 1A 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 09 00 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x09 Qual 0x00 (track following error) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 13.933s timeout 40s
/usr/bin/wodim: Could not write Lead-in.
Writing lead-in at sector -11634
write leadin data: error after 0 bytes
Writing  time:   13.956s
/usr/bin/wodim: fifo had 192 puts and 0 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=48 -raw96r driveropts=burnfree -useinfo -audio -shorttrack /tmp/kde-jlstapleton/k3bCdCopy0/Track01.wav /tmp/kde-jlstapleton/k3bCdCopy0/Track02.wav /tmp/kde-jlstapleton/k3bCdCopy0/Track03.wav /tmp/kde-jlstapleton/k3bCdCopy0/Track04.wav /tmp/kde-jlstapleton/k3bCdCopy0/Track05.wav /tmp/kde-jlstapleton/k3bCdCopy0/Track06.wav /tmp/kde-jlstapleton/k3bCdCopy0/Track07.wav /tmp/kde-jlstapleton/k3bCdCopy0/Track08.wav /tmp/kde-jlstapleton/k3bCdCopy0/Track09.wav /tmp/kde-jlstapleton/k3bCdCopy0/Track10.wav

Reproducible: Always

Steps to Reproduce:
1. click on copy media and put original CD in
2. When it gives the message that device is taken by another process, click stop process and continue
3. After reading the CD, put the blank CD in and it will fail when trying to write.
Actual Results:  
Shows error messages and option to file bug report

Expected Results:  
To successfully burn the CD copy

I´m able to copy DVDs without a problem