Application: kmail (1.13.5) KDE Platform Version: 4.4.5 (KDE 4.4.5) Qt Version: 4.6.3 Operating System: Linux 2.6.32-5-686 i686 Distribution: Debian GNU/Linux 6.0.4 (squeeze) -- Information about the crash: lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 6.0.4 (squeeze) Release: 6.0.4 Codename: squeeze dpkg -l kmail ii kmail 4:4.4.7-3 full featured graphical email client kmail --version Qt: 4.6.3 KDE Development Platform: 4.4.5 (KDE 4.4.5) KMail: 1.13.5 FS: (type ext3 (rw,noatime,user_xattr,errors=remount-ro)) kde --version bash: kde: command not found $ kde4 --version exec: 9: --version: not found $ kded4 --version Qt: 4.6.3 KDE Development Platform: 4.4.5 (KDE 4.4.5) KDE Dæmon: $Id: kded.cpp 1031637 2009-10-05 16:58:19Z lunakl $ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz stepping : 11 cpu MHz : 1200.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 3192.20 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz stepping : 11 cpu MHz : 1200.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 3191.99 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: Lenovo Thinkpad x61s with HDD hdparm -I /dev/sda /dev/sda: ATA device, with non-removable media Model Number: ST9500420ASG Serial Number: 5VJ4V3KG Firmware Revision: 0002SDM1 Transport: Serial Standards: Used: unknown (minor revision code 0x0029) Supported: 8 7 6 5 Likely used: 8 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 976773168 Logical/Physical Sector size: 512 bytes device size with M = 1024*1024: 476940 MBytes device size with M = 1000*1000: 500107 MBytes (500 GB) cache/buffer size = 16384 KBytes Nominal Media Rotation Rate: 7200 Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Advanced power management level: 128 Recommended acoustic management value: 208, current value: 208 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE * Advanced Power Management feature set SET_MAX security extension * Automatic Acoustic Management feature set * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test * General Purpose Logging feature set * WRITE_{DMA|MULTIPLE}_FUA_EXT * WRITE_DMA_QUEUED_FUA_EXT * 64-bit World wide name * IDLE_IMMEDIATE with UNLOAD Write-Read-Verify feature set * WRITE_UNCORRECTABLE_EXT command * {READ,WRITE}_DMA_EXT_GPL commands * Segmented DOWNLOAD_MICROCODE * Free-fall Control feature set * Gen1 signaling speed (1.5Gb/s) * Gen2 signaling speed (3.0Gb/s) * Native Command Queueing (NCQ) * Host-initiated interface power management * Phy event counters * Device-initiated interface power management * Software settings preservation * SMART Command Transport (SCT) feature set * SCT Long Sector Access (AC1) * SCT LBA Segment Access (AC2) * SCT Error Recovery Control (AC3) * SCT Features Control (AC4) * SCT Data Tables (AC5) unknown 206[12] (vendor specific) Security: Master password revision code = 65534 supported not enabled not locked frozen not expired: security count supported: enhanced erase 106min for SECURITY ERASE UNIT. 106min for ENHANCED SECURITY ERASE UNIT. Logical Unit WWN Device Identifier: 5000c500243e7b50 NAA : 5 IEEE OUI : 000c50 Unique ID : 0243e7b50 Checksum: correct smartctl -A /dev/sda smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 117 094 006 Pre-fail Always - 160503449 3 Spin_Up_Time 0x0003 100 098 085 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 598 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 071 060 030 Pre-fail Always - 47362452970 9 Power_On_Hours 0x0032 086 086 000 Old_age Always - 12386 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always - 451 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 310 188 Command_Timeout 0x0032 100 097 000 Old_age Always - 30065230409 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 060 050 045 Old_age Always - 40 (Lifetime Min/Max 32/42) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 12 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1572 193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 749406 194 Temperature_Celsius 0x0022 040 050 000 Old_age Always - 40 (Lifetime Min/Max 0/62260) 195 Hardware_ECC_Recovered 0x001a 048 045 000 Old_age Always - 160503449 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 44762149168981 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3503099671 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 557281974 254 Free_Fall_Sensor 0x0032 001 001 000 Old_age Always - 35 hope it will do, if not, write me (what you want), i will try my best to give more info to make kmail the best of the best of the best! :) The crash can be reproduced every time. -- Backtrace: Application: KMail (kmail), signal: Segmentation fault [KCrash Handler] #6 0xb6f45ada in ?? () from /usr/lib/libkmailprivate.so.4 #7 0xb6f494ea in ?? () from /usr/lib/libkmailprivate.so.4 #8 0xb68337aa in QMetaObject::metacall(QObject*, QMetaObject::Call, int, void**) () from /usr/lib/libQtCore.so.4 #9 0xb68421bb in QMetaObject::activate(QObject*, QMetaObject const*, int, void**) () from /usr/lib/libQtCore.so.4 #10 0xb7350c8f in KJob::infoMessage(KJob*, QString const&, QString const&) () from /usr/lib/libkdecore.so.5 #11 0xb53be941 in ?? () from /usr/lib/libkio.so.5 #12 0xb53c28f0 in KIO::SimpleJob::qt_metacall(QMetaObject::Call, int, void**) () from /usr/lib/libkio.so.5 #13 0xb68337aa in QMetaObject::metacall(QObject*, QMetaObject::Call, int, void**) () from /usr/lib/libQtCore.so.4 #14 0xb68421bb in QMetaObject::activate(QObject*, QMetaObject const*, int, void**) () from /usr/lib/libQtCore.so.4 #15 0xb54902e3 in KIO::SlaveInterface::infoMessage(QString const&) () from /usr/lib/libkio.so.5 #16 0xb54934ff in KIO::SlaveInterface::dispatch(int, QByteArray const&) () from /usr/lib/libkio.so.5 #17 0xb5490d23 in KIO::SlaveInterface::dispatch() () from /usr/lib/libkio.so.5 #18 0xb54841f8 in KIO::Slave::gotInput() () from /usr/lib/libkio.so.5 #19 0xb5484403 in KIO::Slave::qt_metacall(QMetaObject::Call, int, void**) () from /usr/lib/libkio.so.5 #20 0xb68337aa in QMetaObject::metacall(QObject*, QMetaObject::Call, int, void**) () from /usr/lib/libQtCore.so.4 #21 0xb68421bb in QMetaObject::activate(QObject*, QMetaObject const*, int, void**) () from /usr/lib/libQtCore.so.4 #22 0xb538cdd7 in KIO::Connection::readyRead() () from /usr/lib/libkio.so.5 #23 0xb538f17e in ?? () from /usr/lib/libkio.so.5 #24 0xb538f2ae in KIO::Connection::qt_metacall(QMetaObject::Call, int, void**) () from /usr/lib/libkio.so.5 #25 0xb68337aa in QMetaObject::metacall(QObject*, QMetaObject::Call, int, void**) () from /usr/lib/libQtCore.so.4 #26 0xb683dd36 in QMetaCallEvent::placeMetaCall(QObject*) () from /usr/lib/libQtCore.so.4 #27 0xb683edfe in QObject::event(QEvent*) () from /usr/lib/libQtCore.so.4 #28 0xb5d775cc in QApplicationPrivate::notify_helper(QObject*, QEvent*) () from /usr/lib/libQtGui.so.4 #29 0xb5d7e15e in QApplication::notify(QObject*, QEvent*) () from /usr/lib/libQtGui.so.4 #30 0xb76a4bfa in KApplication::notify(QObject*, QEvent*) () from /usr/lib/libkdeui.so.5 #31 0xb682e4cb in QCoreApplication::notifyInternal(QObject*, QEvent*) () from /usr/lib/libQtCore.so.4 #32 0xb6831f2c in QCoreApplicationPrivate::sendPostedEvents(QObject*, int, QThreadData*) () from /usr/lib/libQtCore.so.4 #33 0xb68320ad in QCoreApplication::sendPostedEvents(QObject*, int) () from /usr/lib/libQtCore.so.4 #34 0xb685a57f in ?? () from /usr/lib/libQtCore.so.4 #35 0xb3f97305 in g_main_context_dispatch () from /lib/libglib-2.0.so.0 #36 0xb3f9afe8 in ?? () from /lib/libglib-2.0.so.0 #37 0xb3f9b1c8 in g_main_context_iteration () from /lib/libglib-2.0.so.0 #38 0xb685a075 in QEventDispatcherGlib::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib/libQtCore.so.4 #39 0xb5e35ed5 in ?? () from /usr/lib/libQtGui.so.4 #40 0xb682cae9 in QEventLoop::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib/libQtCore.so.4 #41 0xb682cf3a in QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib/libQtCore.so.4 #42 0xb683216f in QCoreApplication::exec() () from /usr/lib/libQtCore.so.4 #43 0xb5d77667 in QApplication::exec() () from /usr/lib/libQtGui.so.4 #44 0x0804aafe in _start () This bug may be a duplicate of or related to bug 163071. Possible duplicates by query: bug 276403, bug 265694, bug 265574, bug 260255, bug 257122. Reported using DrKonqi
I use PGP. and about 10 POP3 and 1 imap mailboxes, mails are held in maildir, on imap server too... on IMAP server side I can seen: Feb 26 17:35:02 y.y.y.y dovecot: [ID 583609 mail.info] imap(login): Disconnected: Logged out bytes=103890/33586614 Feb 26 17:35:31 y.y.y.y dovecot: [ID 583609 mail.info] imap-login: Login: user=<login>, method=PLAIN, rip=x.x.x.x, lip=y.y.y.y, mpid=29146, TLS x.x.x.x - client IP y.y.y.y - server IP
KMail 1.x is no longer maintained. Please update to KMail 2. The KDE version you are using is also quite old, please update to KDE 4.8.