Version: unspecified (using KDE 4.6.5) OS: Linux Devices ----------------------- TOSHIBA DVD-ROM SD-M1712 1004 (/dev/sr0, CD-ROM, DVD-ROM) [DVD-ROM, CD-ROM] [Keine] [%7] HL-DT-ST DVDRAM GSA-H42N RL00 (/dev/sr1, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R doppelschichtig, DVD+R, DVD+RW, DVD+R doppelschichtig) [DVD-ROM, DVD-R sequenziell, Zweischichtige DVD-R sequenziell, Zweischicht-DVD-R-Sprung, DVD-RAM, DVD-RW Eingeschränktes Ăberbrennen, DVD-RW sequenziell, DVD+RW, DVD+R, Zweischichtige DVD+R, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Eingeschränktes Ăberschreiben, Sprung zwischen DVD-Schichten] [%7] K3b::IsoImager ----------------------- mkisofs print size result: 2238671 (4584798208 bytes) System ----------------------- K3b Version: 2.0.2 KDE Version: 4.6.5 (4.6.5) QT Version: 4.7.4 Kernel: 2.6.38.8-desktop-9.mga Used versions ----------------------- mkisofs: 1.1.11 cdrecord: 1.1.11 cdrecord ----------------------- /usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits. scsidev: '/dev/sr1' devname: '/dev/sr1' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Wodim version: 1.1.11 SCSI buffer size: 64512 Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. TOC Type: 1 = CD-ROM Driveropts: 'burnfree' Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identification : 'DVDRAM GSA-H42N ' Revision : 'RL00' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x002B (DVD+R/DL) Profile: 0x0012 (DVD-RAM) Profile: 0x0011 (DVD-R sequential recording) Profile: 0x0015 (DVD-R/DL sequential recording) Profile: 0x0016 (DVD-R/DL layer jump recording) Profile: 0x0014 (DVD-RW sequential recording) Profile: 0x0013 (DVD-RW restricted overwrite) Profile: 0x001A (DVD+RW) Profile: 0x001B (DVD+R) Profile: 0x002B (DVD+R/DL) (current) Profile: 0x0010 (DVD-ROM) Profile: 0x0009 (CD-R) Profile: 0x000A (CD-RW) Profile: 0x0008 (CD-ROM) Profile: 0x0002 (Removable disk) Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). Driver flags : SWABAUDIO BURNFREE Supported modes: PACKET SAO Drive buf size : 1114112 = 1088 KB Drive DMA Speed: 17111 kB/s 97x CD 12x DVD FIFO size : 4194304 = 4096 KB Speed set to 11080 KB/s Track 01: data 4372 MB Total size: 5021 MB (497:28.94) = 2238671 sectors Lout start: 5021 MB (497:30/71) = 2238671 sectors Current Secsize: 2048 HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction. Blocks total: 4173824 Blocks current: 4173824 Blocks remaining: 1935153 Starting to write CD/DVD at speed 8.0 in real SAO mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. dvd_dual_layer_split: read_dvd_structure returns invalid data Preparing middle zone location for this DVD+R dual layer disc Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... /usr/bin/wodim: faio_wait_on_buffer for writer timed out. Sending CUE sheet... Starting new track at sector: 0 Track 01: data 4372 MB Total size: 5021 MB (497:28.94) = 2238671 sectors Lout start: 5021 MB (497:30/71) = 2238671 sectors Current Secsize: 2048 HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction. Blocks total: 4173824 Blocks current: 4173824 Blocks remaining: 1935153 Track 01: 0 of 4372 MB written. Track 01: 1 of 4372 MB written (fifo 75%) [buf 96%] 0.0x. Track 01: 2 of 4372 MB written (fifo 48%) [buf 99%] 0.4x. Track 01: 3 of 4372 MB written (fifo 23%) [buf 99%] 4.3x. /usr/bin/wodim: faio_wait_on_buffer for reader timed out. Writing time: 538.079s /usr/bin/wodim: fifo had 64 puts and 64 gets. /usr/bin/wodim: fifo was 1 times empty and 0 times full, min fill was 0%. Min drive buffer fill was 99% cdrecord command: ----------------------- /usr/bin/wodim -v gracetime=2 dev=/dev/sr1 speed=8 -sao driveropts=burnfree -data -tsize=2238671s - mkisofs ----------------------- 2238671 Warning: -follow-links does not always work correctly; be careful. I: -input-charset not specified, using utf-8 (detected in locale settings) 0.02% done, estimate finish Sat Jan 14 17:57:52 2012 0.04% done, estimate finish Sat Jan 14 17:57:52 2012 0.07% done, estimate finish Sat Jan 14 18:22:31 2012 0.09% done, estimate finish Sat Jan 14 18:16:26 2012 mkisofs calculate size command: ----------------------- /usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid Biss_zum_Abendrot -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-juergen/k3bjk3898.tmp -no-cache-inodes -udf -iso-level 1 -path-list /tmp/kde-juergen/k3bRE3898.tmp -dvd-video -f /tmp/kde-juergen/k3bVideoDvd0 mkisofs command: ----------------------- /usr/bin/genisoimage -gui -graft-points -volid Biss_zum_Abendrot -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-juergen/k3boB3898.tmp -no-cache-inodes -udf -iso-level 1 -path-list /tmp/kde-juergen/k3bEt3898.tmp -dvd-video -f /tmp/kde-juergen/k3bVideoDvd0 Reproducible: Didn't try Steps to Reproduce: I've tried to burn a singl-layer DVD -no problem Actual Results: dont use dual layer Expected Results: I will try it once more in the future
Dear Bug Submitter, This bug has been stagnant for a long time. Could you help us out and re-test if the bug is valid in the latest version? I am setting the status to NEEDSINFO pending your response, please change the Status back to REPORTED when you respond. Thank you for helping us make KDE software even better for everyone!
Dear Bug Submitter, This is a reminder that this bug has been stagnant for a long time. Could you help us out and re-test if the bug is valid in the latest version? This bug will be moved back to REPORTED Status for manual review later, which may take a while. If you are able to, please lend us a hand. Thank you for helping us make KDE software even better for everyone!
Thank you for reporting this issue in KDE software. As it has been a while since this issue was reported, can we please ask you to see if you can reproduce the issue with a recent software version? If you can reproduce the issue, please change the status to "REPORTED" when replying. Thank you!
Dear Bug Submitter, This bug has been in NEEDSINFO status with no change for at least 15 days. Please provide the requested information as soon as possible and set the bug status as REPORTED. Due to regular bug tracker maintenance, if the bug is still in NEEDSINFO status with no change in 30 days the bug will be closed as RESOLVED > WORKSFORME due to lack of needed information. For more information about our bug triaging procedures please read the wiki located here: https://community.kde.org/Guidelines_and_HOWTOs/Bug_triaging If you have already provided the requested information, please mark the bug as REPORTED so that the KDE team knows that the bug is ready to be confirmed. Thank you for helping us make KDE software even better for everyone!
This bug has been in NEEDSINFO status with no change for at least 30 days. The bug is now closed as RESOLVED > WORKSFORME due to lack of needed information. For more information about our bug triaging procedures please read the wiki located here: https://community.kde.org/Guidelines_and_HOWTOs/Bug_triaging Thank you for helping us make KDE software even better for everyone!