Version: 2.0.2 (using Devel) OS: Linux Suspect system fault, but unsure. Otherwise K3b works fine. Burnt ISO then tried to open that for burning, but [burn] stays disabled even if I format the DVDRW with K3B. Never had this problem with Linux Mint Julia, but this is a new installation of Mint Katya, which is likely to be cause and associated with permissions somehow. Reproducible: Always Steps to Reproduce: As above Actual Results: As above Expected Results: Burn DVDRW
Devices ----------------------- ATAPI DVD-ROM 16XMax 1.50 (/dev/sr1, CD-ROM, DVD-ROM) [DVD-ROM, CD-ROM] [None] [%7] Imation IMWDVRW16DL84I YSI3 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] [%7] K3b::IsoImager ----------------------- mkisofs print size result: 2148711 (4400560128 bytes) System ----------------------- K3b Version: 2.0.2 KDE Version: 4.6.2 (4.6.2) QT Version: 4.7.2 Kernel: 2.6.38-8-generic Used versions ----------------------- mkisofs: 1.1.11 cdrecord: 1.1.11 cdrecord ----------------------- /usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits. scsidev: '/dev/sr0' devname: '/dev/sr0' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Wodim version: 1.1.11 SCSI buffer size: 64512 Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. TOC Type: 1 = CD-ROM Driveropts: 'burnfree' Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'Imation ' Identification : 'IMWDVRW16DL84I ' Revision : 'YSI3' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0013 (DVD-RW restricted overwrite) Profile: 0x002B (DVD+R/DL) Profile: 0x001B (DVD+R) Profile: 0x001A (DVD+RW) Profile: 0x0016 (DVD-R/DL layer jump recording) Profile: 0x0015 (DVD-R/DL sequential recording) Profile: 0x0014 (DVD-RW sequential recording) (current) Profile: 0x0013 (DVD-RW restricted overwrite) (current) Profile: 0x0011 (DVD-R sequential recording) Profile: 0x0010 (DVD-ROM) Profile: 0x000A (CD-RW) Profile: 0x0009 (CD-R) Profile: 0x0008 (CD-ROM) Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). Driver flags : SWABAUDIO BURNFREE Supported modes: PACKET SAO Drive buf size : 1182464 = 1154 KB FIFO size : 12582912 = 12288 KB Speed set to 2770 KB/s Track 01: data 4196 MB Total size: 4819 MB (477:29.48) = 2148711 sectors Lout start: 4819 MB (477:31/36) = 2148711 sectors Current Secsize: 2048 HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction. Blocks total: 2297888 Blocks current: 2297888 Blocks remaining: 149177 Starting to write CD/DVD at speed 2.0 in real SAO mode for multi session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... Errno: 5 (Input/output error), reserve track scsi sendcmd: no error CDB: 53 00 00 00 00 00 20 C9 67 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.008s timeout 200s /usr/bin/wodim: Cannot open new session. input buffer ready. Writing time: 0.045s /usr/bin/wodim: fifo had 192 puts and 0 gets. /usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%. cdrecord command: ----------------------- /usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=2 -sao driveropts=burnfree -multi -data -tsize=2148711s - mkisofs ----------------------- 2148711 I: -input-charset not specified, using utf-8 (detected in locale settings) 0.02% done, estimate finish Fri Jul 22 09:38:46 2011 0.05% done, estimate finish Fri Jul 22 09:38:46 2011 0.07% done, estimate finish Fri Jul 22 10:02:35 2011 0.09% done, estimate finish Fri Jul 22 09:56:32 2011 0.12% done, estimate finish Fri Jul 22 09:53:01 2011 0.14% done, estimate finish Fri Jul 22 09:50:40 2011 0.16% done, estimate finish Fri Jul 22 09:48:59 2011 0.19% done, estimate finish Fri Jul 22 09:47:41 2011 0.21% done, estimate finish Fri Jul 22 09:46:42 2011 0.23% done, estimate finish Fri Jul 22 09:45:55 2011 0.26% done, estimate finish Fri Jul 22 09:45:16 2011 0.28% done, estimate finish Fri Jul 22 09:44:43 2011 mkisofs calculate size command: ----------------------- /usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid various -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-alistair/k3bvr2037.tmp -rational-rock -hide-list /tmp/kde-alistair/k3bsj2037.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-alistair/k3bAD2037.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/kde-alistair/k3bGS2037.tmp mkisofs command: ----------------------- /usr/bin/genisoimage -gui -graft-points -volid various -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-alistair/k3bbc2037.tmp -rational-rock -hide-list /tmp/kde-alistair/k3brx2037.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-alistair/k3bHV2037.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/kde-alistair/k3bLW2037.tmp
I know this is old, but I have burned many, many DVD+RWs on k3b with many different drives, and have never had a problem. Maybe this can be closed now?
Original reporter, can you confirm if this still fails for you?
Dear Bug Submitter, This bug has been in NEEDSINFO status with no change for at least 15 days. Please provide the requested information as soon as possible and set the bug status as REPORTED. Due to regular bug tracker maintenance, if the bug is still in NEEDSINFO status with no change in 30 days the bug will be closed as RESOLVED > WORKSFORME due to lack of needed information. For more information about our bug triaging procedures please read the wiki located here: https://community.kde.org/Guidelines_and_HOWTOs/Bug_triaging If you have already provided the requested information, please mark the bug as REPORTED so that the KDE team knows that the bug is ready to be confirmed. Thank you for helping us make KDE software even better for everyone!
This bug has been in NEEDSINFO status with no change for at least 30 days. The bug is now closed as RESOLVED > WORKSFORME due to lack of needed information. For more information about our bug triaging procedures please read the wiki located here: https://community.kde.org/Guidelines_and_HOWTOs/Bug_triaging Thank you for helping us make KDE software even better for everyone!