Created attachment 57299 [details] debugging output Version: 2.0.2 (using KDE 4.4.5) OS: Linux trying to continue a multisession DVD data burn. I was able to do this before K3B upgraded. It starts, can't unmount the disk, returns error, stops. very annoying Reproducible: Didn't try Steps to Reproduce: I start the multisession, add new files, click Burn button, it's starts, returns error code. stops. Actual Results: see debugging file Expected Results: complete multisession burn OS: Linux (i686) release 2.6.32-28-generic-pae Compiler: cc
"Reproducible: Didn't try" sorry, I actually tried several times - even UN-installed K3B, reinstalled K3b and tried again. Same deal every single time. The previous version of K3B worked just fine with my multisession disk burning. I need this to work
Received this error repeatedly while trying to blank a CD-RW. The 'Quick' format option generated the same error. In the past, I've always been able to reboot into Windows and blank the rejected disc using Nero, so I expect the same will be true with this time. I received the same error in Ubuntu 10.04, so I was hoping to see this work in a clean install of Ubuntu 11.04, but no joy. This error was received after using K3bsetup to change the system permissions to K3b's recommended values. I haven't tried using the LITE-ON DVDRW for this operation. I've had past problems with DVD burners munging these old 4x CD-RW discs, so I always use my HP CD-Writer+ 9100 to write to them. Here is the debug log: Devices ----------------------- LITE-ON DVDRW SHW-160P6S PS08 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] [%7] HP CD-Writer+ 9100 1.0c (/dev/sr1, CD-R, CD-RW, CD-ROM) [Error] [SAO, TAO, RAW, SAO/R96R, RAW/R96R] [%7] System ----------------------- K3b Version: 2.0.2 KDE Version: 4.6.2 (4.6.2) QT Version: 4.7.2 Kernel: 2.6.38-8-generic Used versions ----------------------- cdrecord: 1.1.11 cdrecord ----------------------- scsidev: '/dev/sr1' devname: '/dev/sr1' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Wodim version: 1.1.11 SCSI buffer size: 64512 Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. TOC Type: 1 = CD-ROM Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'HP ' Identification : 'CD-Writer+ 9100 ' Revision : '1.0c' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-2 SWABAUDIO Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R Drive buf size : 4183808 = 4085 KB Drive DMA Speed: 22715 kB/s 129x CD 16x DVD Speed set to 706 KB/s Current Secsize: 2048 Starting to write CD/DVD at speed 4.0 in real BLANK mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Performing OPC... Blanking entire disk Errno: 5 (Input/output error), blank unit scsi sendcmd: no error CDB: A1 00 00 00 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 01 27 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x27 Qual 0x00 (write protected) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.003s timeout 9600s /usr/bin/wodim: Cannot blank disk, aborting. cdrecord command: ----------------------- /usr/bin/wodim -v gracetime=2 dev=/dev/sr1 speed=8 -tao blank=all
Wanted to follow-up that in this instance the HP CD-Writer+ 9100 using Nero in Windows also returned an "unknown error". Having nothing to lose, I attempted blanking it using K3b, Ubuntu AMD64 11.04, and my LITE-ON DVDRW and was successful. Maybe my venerable HP CD-Writer+ 9100 is starting to die, but it was the drive that burned the image to the disc in question just a few days before and had not been used for anything else in the interim.
Dear Bug Submitter, This bug has been stagnant for a long time. Could you help us out and re-test if the bug is valid in the latest version? I am setting the status to NEEDSINFO pending your response, please change the Status back to REPORTED when you respond. Thank you for helping us make KDE software even better for everyone!
Dear Bug Submitter, This is a reminder that this bug has been stagnant for a long time. Could you help us out and re-test if the bug is valid in the latest version? This bug will be moved back to REPORTED Status for manual review later, which may take a while. If you are able to, please lend us a hand. Thank you for helping us make KDE software even better for everyone!
It is still a problem. Retested using current Ubuntu 18.04 kernel. Brasero had no problem blanking and burning the ISO using the same drive. Devices ----------------------- TSSTcorp CDDVDW SH-S202N SB01 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] [%7] System ----------------------- K3b Version: 17.12.3 KDE Version: 5.44.0 Qt Version: 5.9.5 Kernel: 4.15.0-43-generic Used versions ----------------------- cdrecord: 1.1.11 cdrecord ----------------------- /usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits. /usr/bin/wodim: Resource temporarily unavailable. Cannot get mmap for 12587008 Bytes on /dev/zero. TOC Type: 1 = CD-ROM cdrecord command: ----------------------- /usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=4 -tao driveropts=burnfree blank=all