Version: 2.0.0 (using KDE 4.4.5) OS: Linux On any type of burn operation, k3b fails with a message to please send the report to developers. Very likely this is an upstream bug with cdrecord or bad hardware. Reproducible: Didn't try Steps to Reproduce: Burn any data project using any burn method on any media. Devices ----------------------- PLEXTOR DVDR PX-810SA 1.00 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] [%7] K3b::IsoImager ----------------------- mkisofs print size result: 36976 (75726848 bytes) System ----------------------- K3b Version: 2.0.0 KDE Version: 4.4.5 (KDE 4.4.5) QT Version: 4.6.3 Kernel: 2.6.32-5-amd64 Used versions ----------------------- mkisofs: 1.1.11 cdrecord: 1.1.11 cdrecord ----------------------- scsidev: '/dev/sr0' devname: '/dev/sr0' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Wodim version: 1.1.11 SCSI buffer size: 64512 Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. TOC Type: 3 = CD-ROM XA mode 2 Driveropts: 'burnfree' Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'PLEXTOR ' Identification : 'DVDR PX-810SA ' Revision : '1.00' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0009 (CD-R) Profile: 0x002B (DVD+R/DL) Profile: 0x001B (DVD+R) Profile: 0x001A (DVD+RW) Profile: 0x0016 (DVD-R/DL layer jump recording) Profile: 0x0015 (DVD-R/DL sequential recording) Profile: 0x0014 (DVD-RW sequential recording) Profile: 0x0013 (DVD-RW restricted overwrite) Profile: 0x0012 (DVD-RAM) Profile: 0x0002 (Removable disk) Profile: 0x0011 (DVD-R sequential recording) Profile: 0x0010 (DVD-ROM) Profile: 0x000A (CD-RW) Profile: 0x0009 (CD-R) (current) Profile: 0x0008 (CD-ROM) Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1267712 = 1238 KB FIFO size : 12582912 = 12288 KB Speed set to 7056 KB/s Track 01: data 72 MB Total size: 82 MB (08:13.04) = 36978 sectors Lout start: 83 MB (08:15/03) = 36978 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is unrestricted Is not erasable Disk sub type: Medium Type A, low Beta category (A-) (2) ATIP start of lead in: -11634 (97:26/66) ATIP start of lead out: 359849 (79:59/74) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation New start of lead in: -11634 (97:26/66) New start of lead out: 359849 (79:59/74) Blocks total: 359849 Blocks current: 359849 Blocks remaining: 322871 Starting to write CD/DVD at speed 40.0 in real TAO mode for multi session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Starting new track at sector: 0 Track 01: 0 of 72 MB written. Track 01: 1 of 72 MB written (fifo 94%) [buf 92%] 77.5x. Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error CDB: 2A 00 00 00 02 2E 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 06 38 01 20 0E 24 08 10 40 A8 03 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0xA8 Qual 0x03 (vendor unique sense code 0xA8) [No matching qualifier] Fru 0x0 Sense flags: Blk 104333600 (not valid) cmd finished after 5.276s timeout 40s /usr/bin/wodim: A write error occured. /usr/bin/wodim: Please properly read the error message above. write track data: error after 1142784 bytes Writing time: 25.866s Average write speed 43.9x. Fixating... Fixating time: 19.237s /usr/bin/wodim: fifo had 209 puts and 19 gets. /usr/bin/wodim: fifo was 0 times empty and 2 times full, min fill was 93%. cdrecord command: ----------------------- /usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=40 -tao driveropts=burnfree -multi -xa -tsize=36976s - mkisofs ----------------------- 36976 I: -input-charset not specified, using utf-8 (detected in locale settings) 1.39% done, estimate finish Thu Dec 9 11:24:47 2010 2.73% done, estimate finish Thu Dec 9 11:24:47 2010 4.07% done, estimate finish Thu Dec 9 11:24:47 2010 5.41% done, estimate finish Thu Dec 9 11:24:47 2010 6.80% done, estimate finish Thu Dec 9 11:24:47 2010 8.14% done, estimate finish Thu Dec 9 11:24:47 2010 9.48% done, estimate finish Thu Dec 9 11:24:47 2010 10.82% done, estimate finish Thu Dec 9 11:24:47 2010 12.21% done, estimate finish Thu Dec 9 11:24:47 2010 13.55% done, estimate finish Thu Dec 9 11:24:47 2010 14.89% done, estimate finish Thu Dec 9 11:24:47 2010 16.23% done, estimate finish Thu Dec 9 11:24:47 2010 17.61% done, estimate finish Thu Dec 9 11:24:47 2010 18.96% done, estimate finish Thu Dec 9 11:24:47 2010 20.30% done, estimate finish Thu Dec 9 11:24:47 2010 21.64% done, estimate finish Thu Dec 9 11:24:47 2010 23.02% done, estimate finish Thu Dec 9 11:24:47 2010 24.36% done, estimate finish Thu Dec 9 11:24:47 2010 25.71% done, estimate finish Thu Dec 9 11:24:47 2010 27.05% done, estimate finish Thu Dec 9 11:24:47 2010 28.41% done, estimate finish Thu Dec 9 11:24:47 2010 29.75% done, estimate finish Thu Dec 9 11:24:47 2010 31.14% done, estimate finish Thu Dec 9 11:24:47 2010 32.48% done, estimate finish Thu Dec 9 11:24:47 2010 33.82% done, estimate finish Thu Dec 9 11:24:47 2010 35.16% done, estimate finish Thu Dec 9 11:24:47 2010 36.55% done, estimate finish Thu Dec 9 11:24:47 2010 37.89% done, estimate finish Thu Dec 9 11:24:47 2010 39.23% done, estimate finish Thu Dec 9 11:24:47 2010 40.57% done, estimate finish Thu Dec 9 11:24:47 2010 41.95% done, estimate finish Thu Dec 9 11:24:47 2010 43.30% done, estimate finish Thu Dec 9 11:24:47 2010 44.64% done, estimate finish Thu Dec 9 11:24:47 2010 45.98% done, estimate finish Thu Dec 9 11:24:47 2010 47.36% done, estimate finish Thu Dec 9 11:24:47 2010 48.70% done, estimate finish Thu Dec 9 11:24:47 2010 50.05% done, estimate finish Thu Dec 9 11:24:47 2010 51.39% done, estimate finish Thu Dec 9 11:24:47 2010 52.77% done, estimate finish Thu Dec 9 11:24:47 2010 54.11% done, estimate finish Thu Dec 9 11:24:47 2010 55.45% done, estimate finish Thu Dec 9 11:24:47 2010 56.80% done, estimate finish Thu Dec 9 11:24:47 2010 58.18% done, estimate finish Thu Dec 9 11:24:47 2010 59.52% done, estimate finish Thu Dec 9 11:24:47 2010 60.86% done, estimate finish Thu Dec 9 11:24:47 2010 62.21% done, estimate finish Thu Dec 9 11:24:47 2010 63.59% done, estimate finish Thu Dec 9 11:24:47 2010 64.93% done, estimate finish Thu Dec 9 11:24:47 2010 66.27% done, estimate finish Thu Dec 9 11:24:47 2010 67.62% done, estimate finish Thu Dec 9 11:24:47 2010 69.00% done, estimate finish Thu Dec 9 11:24:47 2010 70.35% done, estimate finish Thu Dec 9 11:24:47 2010 71.69% done, estimate finish Thu Dec 9 11:24:47 2010 73.03% done, estimate finish Thu Dec 9 11:24:47 2010 74.41% done, estimate finish Thu Dec 9 11:24:47 2010 75.75% done, estimate finish Thu Dec 9 11:24:47 2010 77.10% done, estimate finish Thu Dec 9 11:24:47 2010 78.44% done, estimate finish Thu Dec 9 11:24:47 2010 79.82% done, estimate finish Thu Dec 9 11:24:47 2010 81.16% done, estimate finish Thu Dec 9 11:24:47 2010 82.50% done, estimate finish Thu Dec 9 11:24:47 2010 83.85% done, estimate finish Thu Dec 9 11:24:47 2010 85.23% done, estimate finish Thu Dec 9 11:24:47 2010 86.57% done, estimate finish Thu Dec 9 11:24:47 2010 87.91% done, estimate finish Thu Dec 9 11:24:47 2010 89.26% done, estimate finish Thu Dec 9 11:24:47 2010 90.64% done, estimate finish Thu Dec 9 11:24:47 2010 91.97% done, estimate finish Thu Dec 9 11:24:47 2010 93.31% done, estimate finish Thu Dec 9 11:24:47 2010 94.66% done, estimate finish Thu Dec 9 11:24:47 2010 96.05% done, estimate finish Thu Dec 9 11:24:47 2010 97.39% done, estimate finish Thu Dec 9 11:24:47 2010 98.75% done, estimate finish Thu Dec 9 11:24:47 2010 Total translation table size: 0 Total rockridge attributes bytes: 3750 Total directory bytes: 9284 Path table size(bytes): 66 Max brk space used 0 36976 extents written (72 MB) mkisofs calculate size command: ----------------------- /usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid K3b data project -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-root/k3bf26173.tmp -rational-rock -hide-list /tmp/kde-root/k3bG26173.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-root/k3bk26173.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/kde-root/k3bM26173.tmp mkisofs command: ----------------------- /usr/bin/genisoimage -gui -graft-points -volid K3b data project -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-root/k3bg26173.tmp -rational-rock -hide-list /tmp/kde-root/k3bM26173.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-root/k3bs26173.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/kde-root/k3bo26173.tmp
Dear Bug Submitter, This bug has been stagnant for a long time. Could you help us out and re-test if the bug is valid in the latest version? I am setting the status to NEEDSINFO pending your response, please change the Status back to REPORTED when you respond. Thank you for helping us make KDE software even better for everyone!
Dear Bug Submitter, This is a reminder that this bug has been stagnant for a long time. Could you help us out and re-test if the bug is valid in the latest version? This bug will be moved back to REPORTED Status for manual review later, which may take a while. If you are able to, please lend us a hand. Thank you for helping us make KDE software even better for everyone!
Thank you for reporting this issue in KDE software. As it has been a while since this issue was reported, can we please ask you to see if you can reproduce the issue with a recent software version? If you can reproduce the issue, please change the status to "REPORTED" when replying. Thank you!
Dear Bug Submitter, This bug has been in NEEDSINFO status with no change for at least 15 days. Please provide the requested information as soon as possible and set the bug status as REPORTED. Due to regular bug tracker maintenance, if the bug is still in NEEDSINFO status with no change in 30 days the bug will be closed as RESOLVED > WORKSFORME due to lack of needed information. For more information about our bug triaging procedures please read the wiki located here: https://community.kde.org/Guidelines_and_HOWTOs/Bug_triaging If you have already provided the requested information, please mark the bug as REPORTED so that the KDE team knows that the bug is ready to be confirmed. Thank you for helping us make KDE software even better for everyone!
This bug has been in NEEDSINFO status with no change for at least 30 days. The bug is now closed as RESOLVED > WORKSFORME due to lack of needed information. For more information about our bug triaging procedures please read the wiki located here: https://community.kde.org/Guidelines_and_HOWTOs/Bug_triaging Thank you for helping us make KDE software even better for everyone!