Version: 1.91.0 (using KDE 4.4.2) OS: Linux Installed from: Ubuntu Packages Hallo. I upgraded to lucid lynx from karmic. K3b worked great. Now it doesn't. Start up don't works (also reported here http://forum.ubuntu-it.org/index.php/topic,384508.0.html) After 12 minutes startup trying to burn cd iso image of boot cd this error occurs. Already tried several times to complete remove and reinstall kde and also k3b. Here is the error log Devices ----------------------- E-IDE CD-ROM 52X/AKH A64 (/dev/sr1, CD-ROM) [Errore] [Nessuno] [%7] TSSTcorp CD/DVDW SH-S182D SB06 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R sequenziale, DVD-R sequenziale a doppio strato, DVD-R jump a doppio strato, DVD-RAM, DVD-RW a riscrittura limitata, DVD-RW sequenziale, DVD+RW, DVD+R, DVD+R a doppio strato, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Riscrittura limitata, Livello Jump] [%7] System ----------------------- K3b Version: 1.91.0 KDE Version: 4.4.2 (KDE 4.4.2) QT Version: 4.6.2 Kernel: 2.6.32-22-generic Used versions ----------------------- cdrecord: 1.1.10 cdrecord ----------------------- /usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits. scsidev: '/dev/sr0' devname: '/dev/sr0' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Wodim version: 1.1.10 SCSI buffer size: 64512 Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. TOC Type: 1 = CD-ROM Driveropts: 'burnfree' Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'TSSTcorp' Identification : 'CD/DVDW SH-S182D' Revision : 'SB06' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0009 (CD-R) Profile: 0x0015 (DVD-R/DL sequential recording) Profile: 0x0016 (DVD-R/DL layer jump recording) Profile: 0x002B (DVD+R/DL) Profile: 0x001B (DVD+R) Profile: 0x001A (DVD+RW) Profile: 0x0014 (DVD-RW sequential recording) Profile: 0x0013 (DVD-RW restricted overwrite) Profile: 0x0012 (DVD-RAM) Profile: 0x0011 (DVD-R sequential recording) Profile: 0x0010 (DVD-ROM) Profile: 0x000A (CD-RW) Profile: 0x0009 (CD-R) (current) Profile: 0x0008 (CD-ROM) Profile: 0x0002 (Removable disk) Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1056000 = 1031 KB FIFO size : 12582912 = 12288 KB Speed set to 8468 KB/s Track 01: data 699 MB Total size: 803 MB (79:34.86) = 358115 sectors Lout start: 803 MB (79:36/65) = 358115 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type A, high Beta category (A+) (3) ATIP start of lead in: -11634 (97:26/66) ATIP start of lead out: 359846 (79:59/71) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 359846 Blocks current: 359846 Blocks remaining: 1731 Starting to write CD/DVD at speed 48.0 in real SAO mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Sending CUE sheet... Writing pregap for track 1 at -150 Starting new track at sector: 0 Track 01: 0 of 699 MB written. Track 01: 1 of 699 MB written (fifo 99%) [buf 99%] 0.7x. Track 01: 2 of 699 MB written (fifo 100%) [buf 100%] 22.1x. Track 01: 3 of 699 MB written (fifo 100%) [buf 100%] 22.9x. Track 01: 4 of 699 MB written (fifo 100%) [buf 100%] 22.2x. Track 01: 5 of 699 MB written (fifo 100%) [buf 100%] 23.0x. Track 01: 6 of 699 MB written (fifo 100%) [buf 100%] 22.3x. Track 01: 7 of 699 MB written (fifo 100%) [buf 100%] 23.1x. Track 01: 8 of 699 MB written (fifo 100%) [buf 99%] 22.4x. Track 01: 9 of 699 MB written (fifo 100%) [buf 100%] 23.2x. Track 01: 10 of 699 MB written (fifo 100%) [buf 100%] 22.5x. Track 01: 11 of 699 MB written (fifo 99%) [buf 100%] 23.3x. Track 01: 12 of 699 MB written (fifo 100%) [buf 100%] 22.6x. Track 01: 13 of 699 MB written (fifo 100%) [buf 100%] 23.3x. Track 01: 14 of 699 MB written (fifo 100%) [buf 99%] 22.7x. Track 01: 15 of 699 MB written (fifo 100%) [buf 100%] 23.4x. Track 01: 16 of 699 MB written (fifo 100%) [buf 100%] 22.8x. Track 01: 17 of 699 MB written (fifo 100%) [buf 100%] 23.5x. Track 01: 18 of 699 MB written (fifo 100%) [buf 100%] 22.8x. Track 01: 19 of 699 MB written (fifo 100%) [buf 100%] 23.6x. Track 01: 20 of 699 MB written (fifo 99%) [buf 100%] 22.9x. Track 01: 21 of 699 MB written (fifo 100%) [buf 100%] 23.7x. Track 01: 22 of 699 MB written (fifo 100%) [buf 100%] 23.0x. Track 01: 23 of 699 MB written (fifo 100%) [buf 100%] 23.8x. Track 01: 24 of 699 MB written (fifo 99%) [buf 100%] 23.1x. Track 01: 25 of 699 MB written (fifo 100%) [buf 100%] 23.8x. Track 01: 26 of 699 MB written (fifo 100%) [buf 100%] 23.2x. Track 01: 27 of 699 MB written (fifo 100%) [buf 99%] 23.9x. Track 01: 28 of 699 MB written (fifo 100%) [buf 100%] 23.2x. Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error CDB: 2A 00 00 00 39 47 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 03 00 00 Sense Key: 0x0 No Additional Sense, Segment 11 Sense Code: 0x00 Qual 0x03 (setmark detected) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 210.347s timeout 200s /usr/bin/wodim: A write error occured. /usr/bin/wodim: Please properly read the error message above. write track data: error after 30029824 bytes Writing time: 247.664s Average write speed 20.4x. Min drive buffer fill was 99% Fixating... Fixating time: 0.900s /usr/bin/wodim: fifo had 665 puts and 474 gets. /usr/bin/wodim: fifo was 0 times empty and 429 times full, min fill was 97%. BURN-Free was never needed. cdrecord command: ----------------------- /usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=48 -sao driveropts=burnfree -data -tsize=358115s - Thanks for your interest i hope it can be useful for you Regards
Dear Bug Submitter, This bug has been stagnant for a long time. Could you help us out and re-test if the bug is valid in the latest version? I am setting the status to NEEDSINFO pending your response, please change the Status back to REPORTED when you respond. Thank you for helping us make KDE software even better for everyone!
Dear Bug Submitter, This is a reminder that this bug has been stagnant for a long time. Could you help us out and re-test if the bug is valid in the latest version? This bug will be moved back to REPORTED Status for manual review later, which may take a while. If you are able to, please lend us a hand. Thank you for helping us make KDE software even better for everyone!
Thank you for reporting this issue in KDE software. As it has been a while since this issue was reported, can we please ask you to see if you can reproduce the issue with a recent software version? If you can reproduce the issue, please change the status to "REPORTED" when replying. Thank you!
Dear Bug Submitter, This bug has been in NEEDSINFO status with no change for at least 15 days. Please provide the requested information as soon as possible and set the bug status as REPORTED. Due to regular bug tracker maintenance, if the bug is still in NEEDSINFO status with no change in 30 days the bug will be closed as RESOLVED > WORKSFORME due to lack of needed information. For more information about our bug triaging procedures please read the wiki located here: https://community.kde.org/Guidelines_and_HOWTOs/Bug_triaging If you have already provided the requested information, please mark the bug as REPORTED so that the KDE team knows that the bug is ready to be confirmed. Thank you for helping us make KDE software even better for everyone!
This bug has been in NEEDSINFO status with no change for at least 30 days. The bug is now closed as RESOLVED > WORKSFORME due to lack of needed information. For more information about our bug triaging procedures please read the wiki located here: https://community.kde.org/Guidelines_and_HOWTOs/Bug_triaging Thank you for helping us make KDE software even better for everyone!