Version: 0.12.17 (using KDE KDE 3.5.4) Installed from: Mandriva RPMs OS: Linux System ----------------------- K3b Version: 0.12.17 KDE Version: 3.5.4 QT Version: 3.3.6 Kernel: 2.6.17-5mdv Devices ----------------------- HL-DT-ST DVDRAM GSA-4167B DL10 (/dev/sr0, /dev/sg1) at /mnt/cdrom [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD-R DL; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R Sequential; DVD-R Dual Layer Sequential; DVD-R Dual Layer Jump; DVD-RAM; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; DVD+R Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite] Used versions ----------------------- cdrecord: 2.1.1a11 cdrecord ----------------------- scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 Linux sg driver version: 3.5.33 SCSI buffer size: 64512 Cdrecord-ProDVD-Clone 2.01.01a11 (i686-pc-linux-gnu) Copyright (C) 1995-2006 Jörg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.8'. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'DVDRAM GSA-4167B' Revision : 'DL10' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: CD-R Profile: DVD-RAM Profile: DVD-R sequential recording Profile: DVD-R/DL sequential recording Profile: DVD-R/DL layer jump recording Profile: DVD-RW sequential overwrite Profile: DVD-RW restricted overwrite Profile: DVD+RW Profile: DVD+R Profile: DVD+R/DL Profile: DVD-ROM Profile: CD-R (current) Profile: CD-RW Profile: CD-ROM Profile: Removable Disk Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1053696 = 1029 KB Drive pbuf size: 1966080 = 1920 KB FIFO size : 10485760 = 10240 KB Track 01: data 690 MB Total size: 793 MB (78:34.81) = 353611 sectors Lout start: 793 MB (78:36/61) = 353611 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is not unrestricted Is not erasable Disk sub type: Medium Type A, low Beta category (A-) (2) ATIP start of lead in: -12508 (97:15/17) ATIP start of lead out: 359845 (79:59/70) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 22 Manufacturer: Ritek Co. Blocks total: 359845 Blocks current: 359845 Blocks remaining: 6234 Starting to write CD/DVD at speed 48 in real SAO mode for single session. Last chance to quit, starting real write in 3 seconds. 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is OFF. Turning BURN-Free on Performing OPC... Sending CUE sheet... /usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150 /usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 FF FF FF 6A 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 80 30 05 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63488 cmd finished after 0.016s timeout 200s Writing pregap for track 1 at -150 write track pad data: error after 0 bytes BFree: 1029 K BSize: 1029 K Starting new track at sector: 0 Track 01: 0 of 690 MB written. /usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 80 30 05 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63488 cmd finished after 0.016s timeout 200s /usr/bin/cdrecord: A write error occured. /usr/bin/cdrecord: Please properly read the error message above. write track data: error after 0 bytes Writing time: 28.162s Average write speed 168.0x. Fixating... Fixating time: 0.005s /usr/bin/cdrecord: fifo had 160 puts and 1 gets. /usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. cdrecord command: ----------------------- /usr/bin/cdrecord -v gracetime=2 dev=1,0,0 speed=48 -dao driveropts=burnfree -eject fs=10m -data /home/roved/Download/ubuntu-6.10-desktop-amd64.iso
In case this is the first time you try this type of media: try another brand. Otherwise try a lower writing speed.
In an attempt to clean up old bugs that are not valid for K3b 2.0 (=KDE SC 4.x port) anymore, this is now being marked as UNMAINTAINED. If this bug is still valid for 2.0, please reopen it.