Bug 446771

Summary: On Wayland, resume after suspend results in a black screen
Product: [Plasma] kwin Reporter: Txutxifel <jesaenh>
Component: wayland-genericAssignee: KWin default assignee <kwin-bugs-null>
Status: RESOLVED FIXED    
Severity: normal CC: nate, plasma-bugs
Priority: NOR    
Version: 5.23.4   
Target Milestone: ---   
Platform: Other   
OS: Linux   
Latest Commit: Version Fixed In: 5.25
Sentry Crash Report:

Description Txutxifel 2021-12-10 06:32:22 UTC 
STEPS TO REPRODUCE
1.  I tried to suspend in Wayland. It works!
2.  I tried to resume in Wayland. Lights gets on, system boots, backlights  in monitors gets on, but there is no image in wayland.  
3.  I have to reset the system to get it working again

OBSERVED RESULT
-I have no problems in X11. Only Wayland.
-I tried it disabling kscreenlocker. It is not a solution.  
-My graphic card is an NVIDIA 1050 TI. I use 475 series driver. (official repo in Opensuse)
- Ctl+ALt +F1 (or F2...)  no works,  There is no way to get  a terminal / session until rebooting.

I connect to my PC via SSH and get this log.:
#####################################
[  173.449129] sd 2:0:0:0: [sdc] Synchronizing SCSI cache
[  173.449273] sd 2:0:0:0: [sdc] Stopping disk
[  173.452802] sd 3:0:0:0: [sdd] Synchronizing SCSI cache
[  173.452834] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  173.452881] sd 3:0:0:0: [sdd] Stopping disk
[  173.453820] sd 0:0:0:0: [sda] Stopping disk
[  173.464819] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[  173.464871] sd 5:0:0:0: [sde] Synchronizing SCSI cache
[  173.465573] sd 1:0:0:0: [sdb] Stopping disk
[  173.465668] sd 5:0:0:0: [sde] Stopping disk
[  174.606335] ACPI: Preparing to enter system sleep state S3
[  174.608895] PM: Saving platform NVS memory
[  174.609000] Disabling non-boot CPUs ...
[  174.610792] smpboot: CPU 1 is now offline
[  174.613232] smpboot: CPU 2 is now offline
[  174.616043] smpboot: CPU 3 is now offline
[  174.618880] smpboot: CPU 4 is now offline
[  174.620612] IRQ 136: no longer affine to CPU5
[  174.621647] smpboot: CPU 5 is now offline
[  174.622985] IRQ 131: no longer affine to CPU6
[  174.624016] smpboot: CPU 6 is now offline
[  174.625332] IRQ 132: no longer affine to CPU7
[  174.626362] smpboot: CPU 7 is now offline
[  174.629762] ACPI: Low-level resume complete
[  174.629826] PM: Restoring platform NVS memory
[  174.631504] Enabling non-boot CPUs ...
[  174.631537] x86: Booting SMP configuration:
[  174.631537] smpboot: Booting Node 0 Processor 1 APIC 0x2
[  174.633106] CPU1 is up
[  174.633124] smpboot: Booting Node 0 Processor 2 APIC 0x4
[  174.634688] CPU2 is up
[  174.634703] smpboot: Booting Node 0 Processor 3 APIC 0x6
[  174.636267] CPU3 is up
[  174.636283] smpboot: Booting Node 0 Processor 4 APIC 0x1
[  174.636905] CPU4 is up
[  174.636923] smpboot: Booting Node 0 Processor 5 APIC 0x3
[  174.637440] CPU5 is up
[  174.637455] smpboot: Booting Node 0 Processor 6 APIC 0x5
[  174.637978] CPU6 is up
[  174.637993] smpboot: Booting Node 0 Processor 7 APIC 0x7
[  174.638516] CPU7 is up
[  174.640493] ACPI: Waking up from system sleep state S3
[  174.663892] sd 2:0:0:0: [sdc] Starting disk
[  174.663895] sd 3:0:0:0: [sdd] Starting disk
[  174.663919] sd 5:0:0:0: [sde] Starting disk
[  174.663922] sd 1:0:0:0: [sdb] Starting disk
[  174.663924] sd 0:0:0:0: [sda] Starting disk
[  174.666992] parport_pc 00:01: activated
[  174.669333] serial 00:02: activated
[  174.976278] usb 1-2: reset high-speed USB device number 2 using xhci_hcd
[  175.036148] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  175.036189] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  175.036219] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  175.037035] ata2.00: supports DRM functions and may not be fully accessible
[  175.037584] ata6.00: configured for UDMA/133
[  175.038123] ata2.00: supports DRM functions and may not be fully accessible
[  175.038617] ata2.00: configured for UDMA/133
[  175.039744] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  175.042896] ata1.00: configured for UDMA/133
[  175.052977] ata5.00: configured for UDMA/133
[  175.348392] acpi LNXPOWER:16: Turning OFF
[  175.348643] acpi LNXPOWER:15: Turning OFF
[  175.348889] acpi LNXPOWER:14: Turning OFF
[  175.349134] acpi LNXPOWER:13: Turning OFF
[  175.349378] acpi LNXPOWER:12: Turning OFF
[  175.349620] acpi LNXPOWER:11: Turning OFF
[  175.349863] acpi LNXPOWER:10: Turning OFF
[  175.350107] acpi LNXPOWER:0f: Turning OFF
[  175.350350] acpi LNXPOWER:0e: Turning OFF
[  175.350592] acpi LNXPOWER:0d: Turning OFF
[  175.350833] acpi LNXPOWER:0c: Turning OFF
[  175.351075] acpi LNXPOWER:0b: Turning OFF
[  175.351317] acpi LNXPOWER:0a: Turning OFF
[  175.351548] acpi LNXPOWER:09: Turning OFF
[  175.351592] acpi LNXPOWER:08: Turning OFF
[  175.351636] acpi LNXPOWER:07: Turning OFF
[  175.351681] acpi LNXPOWER:06: Turning OFF
[  175.351724] acpi LNXPOWER:05: Turning OFF
[  175.351768] acpi LNXPOWER:04: Turning OFF
[  175.351812] acpi LNXPOWER:03: Turning OFF
[  175.351858] OOM killer enabled.
[  175.351859] Restarting tasks ... 
[  175.352050] pci_bus 0000:04: Allocating resources
[  175.352055] pci 0000:03:00.0: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[  175.352057] pci 0000:03:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[  175.352058] pci 0000:03:00.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
[  175.352062] pci 0000:03:00.0: BAR 14: no space for [mem size 0x00200000]
[  175.352063] pci 0000:03:00.0: BAR 14: failed to assign [mem size 0x00200000]
[  175.352064] pci 0000:03:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[  175.352065] pci 0000:03:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[  175.352066] pci 0000:03:00.0: BAR 13: no space for [io  size 0x1000]
[  175.352067] pci 0000:03:00.0: BAR 13: failed to assign [io  size 0x1000]
[  175.352069] pci 0000:03:00.0: BAR 14: no space for [mem size 0x00200000]
[  175.352070] pci 0000:03:00.0: BAR 14: failed to assign [mem size 0x00200000]
[  175.352071] pci 0000:03:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[  175.352071] pci 0000:03:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[  175.352072] pci 0000:03:00.0: BAR 13: no space for [io  size 0x1000]
[  175.352073] pci 0000:03:00.0: BAR 13: failed to assign [io  size 0x1000]
[  175.352075] pci 0000:03:00.0: PCI bridge to [bus 04]
[  175.359291] done.
[  175.382910] PM: suspend exit
[  176.186998] NVRM: GPU at PCI:0000:01:00: GPU-2c2cdfba-dee8-1360-7e8c-d109a289a6c1
[  176.187001] NVRM: Xid (PCI:0000:01:00): 13, pid=1274, Graphics Exception: Shader Program Header 18 Error
[  176.187004] NVRM: Xid (PCI:0000:01:00): 13, pid=1274, Graphics Exception: ESR 0x405840=0x82040000
[  176.187007] NVRM: Xid (PCI:0000:01:00): 13, pid=1274, Graphics Exception: ESR 0x405848=0x80000000
[  176.187159] NVRM: Xid (PCI:0000:01:00): 13, pid=5179, Graphics Exception: ChID 0010, Class 0000c197, Offset 00001944, Data 00000000
[  176.215175] e1000e 0000:00:1f.6 eth0: NIC Link is Down
[  176.215332] bridge0: port 1(eth0) entered disabled state
[  176.218157] device eth0 left promiscuous mode
[  176.218175] bridge0: port 1(eth0) entered disabled state
[  176.415328] userif-10: sent link down event.
[  176.415331] userif-10: sent link up event.
[  179.646407] e1000e 0000:00:1f.6 eth0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[  179.646465] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  179.677765] bridge0: port 1(eth0) entered blocking state
##################

EXPECTED RESULT
-Suspend works

SOFTWARE/OS VERSIONS

Linux/KDE Plasma:  Opensuse 15.3
KDE Plasma Version:  5.23.4
KDE Frameworks Version:  5.88
Qt Version:  5.12.2

ADDITIONAL INFORMATION
Suspend/Resume works in Gnome. I checked it same PC with a minimal installation. I tested it  with GDM and SSDM.
Comment 1 Nate Graham 2022-05-25 17:33:12 UTC 
Can you try again in the Plasma 5.25 beta or the 5.25 final release on a month? Thanks!
Comment 2 Txutxifel 2022-05-25 18:20:52 UTC 
Yes, 
I did recently. 

I have opensuse 15.4 updated with plasma 5.25 and with last Nvidia drivers.

Yes, now bug diferent, but its still a bug
Now, kwin_wayland doesn't allow suspend the pc. I got and error in dmesg. After 20.1 seconds, pc resume by itself.

If you need, i cant attach the error.

Thank for answering
Comment 3 Nate Graham 2022-05-26 15:54:56 UTC 
Ok, thanks! Sounds like the original issue is fixed now; can you file a new bug report for that new issue? Thanks again!
Comment 4 Txutxifel 2022-05-26 16:24:41 UTC 
(In reply to Nate Graham from comment #3)
> Ok, thanks! Sounds like the original issue is fixed now; can you file a new
> bug report for that new issue? Thanks again!

I have just tested it now, and suspend its working now! Its working perfectly. (I suspended several times)
However,  plasma+ nvidia+wayland is still unestable-> frozen panels, plasma crash. 

PD . I don't have plasma 5.25beta. There is no a created "kwin package"  in Opensuse yet, so I have a mix of 5.25b and 5.24 dependencies. I will tested again with all packages updated.