Version: 0.11.9 (using KDE 3.1.4) Installed from: SuSE Compiler: gcc version 3.3.1 (SuSE Linux) OS: Linux (i686) release 2.4.21-199-default this is the bug report from k3b: System ----------------------- K3b Version: 0.11.9 KDE Version: 3.1.4 QT Version: 3.2.1 cdrecord ----------------------- /usr/bin/cdrecord: Warning: not running as root user, fs= option ignored. scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.25 /usr/bin/cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.75-resmgr-patch '@(#)scsi-linux-sg.c 1.75 02/10/21 Copyright 1997 J. Schilling'). SCSI buffer size: 64512 Cdrecord-Clone 2.01a18-dvd (i686-suse-linux) Copyright (C) 1995-2003 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to <warly@mandrakesoft.com>. Note: The author of cdrecord is not to be bothered with problems in this version. TOC Type: 0 = CD-DA Using libscg version 'schily-0.7' Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'PIONEER ' Identifikation : 'DVD-RW DVR-104 ' Revision : '1.30' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0009 Profile: 0x0014 Profile: 0x0013 Profile: 0x0011 Profile: 0x0010 Profile: 0x000A Profile: 0x0009 (current) Profile: 0x0008 Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R Drive buf size : 1267712 = 1238 KB FIFO size : 4194304 = 4096 KB pregap1: -1 Track 01: audio 40 MB (04:02.54) no preemp swab copy Track 02: audio 35 MB (03:31.61) no preemp swab copy Track 03: audio 32 MB (03:10.25) no preemp swab copy Total size: 108 MB (10:44.41) = 48331 sectors Lout start: 108 MB (10:46/31) = 48331 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type A, high Beta category (A+) (3) ATIP start of lead in: -11634 (97:26/66) ATIP start of lead out: 359848 (79:59/73) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 359848 Blocks current: 359848 Blocks remaining: 311517 Starting to write CD/DVD at speed 8 in real SAO mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. trackno=0 BURN-Free is ON. Performing OPC... Sending CUE sheet... /usr/bin/cdrecord: CUE sheet not accepted. Retrying with minimum pregapsize = 1. /usr/bin/cdrecord: Input/output error. send_cue_sheet: scsi sendcmd: no error CDB: 5D 00 00 00 00 00 00 00 40 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 26 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.018s timeout 200s /usr/bin/cdrecord: Cannot send CUE sheet. /usr/bin/cdrecord: Could not write Lead-in. Writing time: 8.639s /usr/bin/cdrecord: fifo had 64 puts and 0 gets. /usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. cdrecord comand: ----------------------- /usr/bin/cdrecord -v gracetime=2 dev=0,0,0 speed=8 -dao driveropts=burnfree -eject -useinfo -pad -shorttrack -audio /tmp/kde-digitalpalmtree/k3b_audio_0_01.inf /tmp/kde-digitalpalmtree/k3b_audio_0_02.inf /tmp/kde-digitalpalmtree/k3b_audio_0_03.inf
Closing this bug because it can probably be fixed by one of the below: 1. installing a new version of K3b 2. installing a new version of the cdrtools 3. Using a lower writing speed 4. using a different writing mode 5. using a different media brand. If none of the above help and closing this bug was a fault, please reopen.