Unfortunately I do not have a scanner with ADF.

The reason you do no t get all the pages scanned is probably that the scan source name/string is not recognized by libksane as a ADF. That means that the batch scanning is not activated.

Can you run this command:
scanimage -A -d <device>

Where <device> is the devie Id that you get when runing  scanimage -L.

Then copy paste the output to this bug.

Thanks,
  Kåre

Hi, 
The output from the commands is below.

Rob Verduijn

scanimage -L :
device `brother4:net1;dev0' is a Brother DCP-7065DN FRIENDLY-NAME

scanimage -A -d ' brother4:net1;dev0' :
scanimage: rounded value of br-x from 215.9 to 215.88
scanimage: rounded value of br-y from 355.6 to 355.567

All options specific to device `brother4:net1;dev0':
  Mode:
    --mode Black & White|Gray[Error Diffusion]|True Gray|24bit Color [24bit Color]
        Select the scan mode
    --resolution 100|150|200|300|400|600|1200|2400|4800|9600dpi [200]
        Sets the resolution of the scanned image.
    --source FlatBed|Automatic Document Feeder(left aligned)|Automatic Document Feeder(centrally aligned) [Automatic Document Feeder(left aligned)]
        Selects the scan source (such as a document-feeder).
    --brightness -50..50% (in steps of 1) [inactive]
        Controls the brightness of the acquired image.
    --contrast -50..50% (in steps of 1) [inactive]
        Controls the contrast of the acquired image.
  Geometry:
    -l 0..215.9mm (in steps of 0.0999908) [0]
        Top-left x position of scan area.
    -t 0..355.6mm (in steps of 0.0999908) [0]
        Top-left y position of scan area.
    -x 0..215.9mm (in steps of 0.0999908) [215.88]
        Width of scan-area.
    -y 0..355.6mm (in steps of 0.0999908) [355.567]
        Height of scan-area.

Thanks,

Are you able to compile and test libksane from git? I think I can fix the problem quite easily, but it needs to be tested.

/Kåre

Hi,

I've looked into the git source from libksane and what is in the libksane.src.rpm, and they are not even remotly alike. Obviously it's a long way from git source to rpm package. Without some serious studying (more likely weeks than days) of the kde ways of packaging or the ways of git compiling I cannot compile it. I'm not completely green with compiling stuff, but I definitely need some help and explanations to compile likksane from git.

Rob

# Get the latest code
git clone git://anongit.kde.org/libksane

# Compile 
mkdir build
cd build
cmake -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_BUILD_TYPE=debugfull ../libksane
make
sudo make install

The above requires that you have KDE development packages installed. On ubuntu you can install all build dependencies with:
sudo apt-get build-dep libksane

I'm not sure if there is something similar on openSUSE...


The line to change would be ~line 919 in libksane/libksane//ksane_widget_private.cpp
Change :
            if (source == "Automatic Document Feeder") {
to
            if (source.contains("Automatic Document Feeder")) {

Hope this helps

/Kåre

Hi,

In opensuse you can install the kde-development libraries with:
zypper in -t pattern devel_kde
Or check the kde-development pattern in the yast installation gui.

The scanner now scans and saves every page  ( jay :-)

Great work.
Rob

Git commit 794d8fe54f1b4b4af7f985b618b6dc9a64248866 by Kåre Särs.
Committed on 07/03/2012 at 19:16.
Pushed by sars into branch 'KDE/4.8'.

Be less restrictive about scan source for batch-scan

M  +1    -1    libksane/ksane_widget_private.cpp

http://commits.kde.org/libksane/794d8fe54f1b4b4af7f985b618b6dc9a64248866

Git commit e5d8f6cb95ecbcc9c45baccc08b1ddb0892fc8d8 by Kåre Särs.
Committed on 07/03/2012 at 19:16.
Pushed by sars into branch 'master'.

Be less restrictive about scan source for batch-scan

M  +1    -1    libksane/ksane_widget_private.cpp

http://commits.kde.org/libksane/e5d8f6cb95ecbcc9c45baccc08b1ddb0892fc8d8

This isn't working for me in Kubuntu 15.10 using Skanlite 1.1. ADF Simplex just scans the first page, even though all pages are fed through the sheet feeder.

Michael:

Can you do the same as Rob did in comment 2?

Hi Kare,

Sorry for the delay. Here is the output of scanimage -A -d 'smfp:net;192.168.6.122'

All options specific to device `smfp:net;192.168.6.122':
    --preview[=(yes|no)] [no] [read-only]
        Request a preview-quality scan
  Image Quality:
    --mode Color - 16 Million Colors|Grayscale - 256 Levels|Black and White - Halftone|Black and White - Line Art [Color - 16 Million Colors]
        Set the color composition mode of the scanned image
    --resolution 75|100|150|200|300|600|1200dpi [300]
        Set the resolution of the scanned image
  Scan Area:
    --doc-source Flatbed|ADF Simplex [ADF Simplex]
        Select source of the document to be scanned
    --page-format Statement|Statement(Rotated)|A5|A5(Rotated)|B5(JIS)|Executive|A4|Letter|Legal|Folio|Custom [Letter]
        Set the paper format of the scanned page
    -l 0..216mm [0]
        Set left position of the scan area
    -t 0..355mm [0]
        Set top position of the scan area
    -x 0..216mm [215]
        Width of scan-area.
    -y 0..355mm [279]
        Height of scan-area.

Git commit ddc17b08dc3923cf134ec5478a62fc7ff10f8497 by Kåre Särs.
Committed on 27/09/2015 at 20:52.
Pushed by sars into branch 'Applications/15.08'.

Also allow sources containg "ADF" to trigger batch scanning

M  +2    -2    libksane/ksane_widget_private.cpp

http://commits.kde.org/libksane/ddc17b08dc3923cf134ec5478a62fc7ff10f8497

Git commit 6b436624b3b85ec1de0ebd39012f28376b36bac0 by Kåre Särs.
Committed on 27/09/2015 at 21:05.
Pushed by sars into branch 'frameworks'.

Also allow sources containing "ADF" to trigger batch scanning

M  +2    -2    src/ksane_p.cpp

http://commits.kde.org/libksane/6b436624b3b85ec1de0ebd39012f28376b36bac0