Version: (using KDE 4.1.2) Compiler: compiler used to get 64 bit Fedora 9 latest binaries OS: Linux Installed from: Fedora RPMs I changed desktop background, and a little time after that closed desktop plasma applet, and this crushed down and restarted some part of KDE. Before that my laptop become slower, because new nvidia driver starts ventilation BEFORE plasma effects, slows down everything, and only after switching on ventilation effects do appear. Crush happened during such a slowdown. Desktop closure animation was quite slow, if compared to normal closure. Since there are no attachments options, please see next my dmesg output, and then "dumped core" of kde/or part of kde. Sorry - i do not have debugging info installed :-( Core dump is at the bottom. my hardware: Initializing cgroup subsys cpuset Linux version 2.6.26.6-79.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Fri Oct 17 14:20:33 EDT 2008 Command line: ro root=UUID=fbd7d8fe-c314-40a6-8c17-b23abb3d4255 rhgb quiet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e000 (usable) BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ff50000 (usable) BIOS-e820: 000000007ff50000 - 000000007ff65000 (ACPI data) BIOS-e820: 000000007ff65000 - 000000007ff66000 (ACPI NVS) BIOS-e820: 000000007ff66000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 158) 0 entries of 25600 used Entering add_active_range(0, 256, 524112) 1 entries of 25600 used max_pfn_mapped = 1048576 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping DMI present. ACPI: RSDP 000F7CA0, 0024 (r2 ACRSYS) ACPI: XSDT 7FF5E2F7, 005C (r1 ACRSYS ACRPRDCT 6040000 LTP 0) ACPI: SLIC 7FF64A8C, 0176 (r1 ACRSYS ACRPRDCT 6040000 LOHR 0) ACPI: FACP 7FF64C02, 00F4 (r3 NVIDIA MCP67-M 6040000 PTL_ F4240) ACPI: DSDT 7FF5E353, 66C5 (r1 NVIDIA MCP67 6040000 MSFT 3000000) ACPI: FACS 7FF65FC0, 0040 ACPI: SSDT 7FF64CF6, 0206 (r1 PTLTD POWERNOW 6040000 LTP 1) ACPI: MCFG 7FF64EFC, 003C (r1 Nvidia NVDAACPI 6040000 NVDA 0) ACPI: HPET 7FF64F38, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) ACPI: APIC 7FF64F70, 0068 (r1 PTLTD APIC 6040000 LTP 0) ACPI: BOOT 7FF64FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: DMI detected: Acer Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-000000007ff50000 Entering add_active_range(0, 0, 158) 0 entries of 25600 used Entering add_active_range(0, 256, 524112) 1 entries of 25600 used Bootmem setup node 0 0000000000000000-000000007ff50000 NODE_DATA [000000000000c000 - 0000000000020fff] bootmap [0000000000021000 - 0000000000030fef] pages 10 early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] TRAMPOLINE early res: 2 [200000-84c54b] TEXT DATA BSS early res: 3 [37d15000-37fef6c8] RAMDISK early res: 4 [9e000-fffff] BIOS reserved early res: 5 [8000-bfff] PGTABLE [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff810001200000-ffff810002dfffff] on node 0 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0 -> 158 0: 256 -> 524112 On node 0 totalpages: 524014 DMA zone: 56 pages used for memmap DMA zone: 1719 pages reserved DMA zone: 2223 pages, LIFO batch:0 DMA32 zone: 7110 pages used for memmap DMA32 zone: 512906 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x10de8201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000 PM: Registered nosave memory: 00000000000ce000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 45104 bytes of per cpu data NR_CPUS: 64, nr_cpu_ids: 2 Built 1 zonelists in Node order, mobility grouping on. Total pages: 515129 Policy zone: DMA32 Kernel command line: ro root=UUID=fbd7d8fe-c314-40a6-8c17-b23abb3d4255 rhgb quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER Marking TSC unstable due to TSCs unsynchronized time.c: Detected 1900.251 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... Node 0: aperture @ 270000000 size 32 MB Aperture beyond 4GB. Ignoring. No AGP bridge found Memory: 2057588k/2096448k available (2703k kernel code, 38468k reserved, 1485k data, 980k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered Calibrating delay using timer specific routine.. 3803.72 BogoMIPS (lpj=1901860) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 ACPI: Core revision 20080321 CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-58 stepping 01 Using local APIC timer interrupts. APIC timer calibration result 12501683 Detected 12.501 MHz APIC timer. Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3800.41 BogoMIPS (lpj=1900206) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 AMD C1E detected late. Force timer broadcast. CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-58 stepping 01 Brought up 2 CPUs Total of 2 processors activated (7604.13 BogoMIPS). sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=5792 bytes CPU0 attaching sched-domain: domain 0: span 0-1 groups: 0 1 domain 1: span 0-1 groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 groups: 1 0 domain 1: span 0-1 groups: 0-1 net_namespace: 1224 bytes Booting paravirtualized kernel on bare hardware Time: 15:57:58 Date: 10/26/08 NET: Registered protocol family 16 No dock devices found. node 0 link 0: io port [1000, fffff] TOM: 0000000080000000 aka 2048M node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [80000000, dfffffff] node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [f0000000, fe0bffff] bus: [00,ff] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [a0000, bffff] bus: 00 index 2 mmio: [80000000, fcffffffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE storm detected, disabling EC GPE ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in poll mode ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:08.0 Pre-1.1 PCIe device detected, disable ASPM for 0000:00:0d.0. It can be enabled forcedly with 'pcie_aspm=force' ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 11) *10 ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 *11) ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 11) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 11) *0, disabled. ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *10 ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10 ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10 ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *7 ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10 ACPI: PCI Interrupt Link [LGPU] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSI0] (IRQs 20 21 22 23) *5 ACPI: PCI Interrupt Link [Z00N] (IRQs 20 21 22 23) *10 ACPI: PCI Interrupt Link [Z00O] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LPMU] (IRQs 18) *11 Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 hpet0: 3 32-bit timers, 25000000 Hz Clockevents: could not switch to one-shot mode: lapic is not functional. Could not switch to high resolution mode on CPU 0 Clockevents: could not switch to one-shot mode: lapic is not functional. Could not switch to high resolution mode on CPU 1 ACPI: RTC can wake from S4 system 00:01: ioport range 0x360-0x361 has been reserved system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:07: iomem range 0xe0000000-0xefffffff could not be reserved system 00:0a: ioport range 0x1000-0x107f has been reserved system 00:0a: ioport range 0x1080-0x10ff has been reserved system 00:0a: ioport range 0x1400-0x147f has been reserved system 00:0a: ioport range 0x1480-0x14ff has been reserved system 00:0a: ioport range 0x1800-0x187f has been reserved system 00:0a: ioport range 0x1880-0x18ff has been reserved system 00:0c: iomem range 0xffc00000-0xffffffff could not be reserved system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved system 00:0c: iomem range 0xfed00000-0xfed00fff has been reserved system 00:0c: iomem range 0xfef00000-0xfef00fff has been reserved PCI: Bridge: 0000:00:08.0 IO window: disabled. MEM window: 0xf0500000-0xf05fffff PREFETCH window: disabled. PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:02:00.0 PCI: Bridge: 0000:00:0b.0 IO window: 4000-4fff MEM window: 0xcc000000-0xceffffff PREFETCH window: 0x00000000d0000000-0x00000000dfffffff PCI: Bridge: 0000:00:0c.0 IO window: 5000-5fff MEM window: 0xf0200000-0xf03fffff PREFETCH window: 0x00000000f0000000-0x00000000f01fffff PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: 0xf0400000-0xf04fffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:08.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs...<6>Clockevents: could not switch to one-shot mode: lapic is not functional. Could not switch to high resolution mode on CPU 1 Clockevents: could not switch to one-shot mode: lapic is not functional. Could not switch to high resolution mode on CPU 0 it is Freeing initrd memory: 2921k freed Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1225036676.718:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 4024 SELinux: Registering netfilter hooks Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:07.0: Enabling HT MSI Mapping pci 0000:00:08.0: Enabling HT MSI Mapping pci 0000:00:09.0: Enabling HT MSI Mapping pci 0000:00:0a.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Enabling HT MSI Mapping pci 0000:00:0c.0: Enabling HT MSI Mapping pci 0000:00:0d.0: Enabling HT MSI Mapping pci 0000:02:00.0: Boot video device PCI: Setting latency timer of device 0000:00:0b.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] Allocate Port Service[0000:00:0b.0:pcie03] PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] Allocate Port Service[0000:00:0c.0:pcie03] PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] Allocate Port Service[0000:00:0d.0:pcie03] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button (CM) [SLPB] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 ACPI: Power Button (CM) [PWRB] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: LNXTHERM:01 is registered as thermal_zone0 ACPI: Thermal Zone [THRM] (70 C) hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled brd: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input4 PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 Magic number: 12:13:994 Freeing unused kernel memory: 980k freed Write protecting the kernel read-only data: 3852k ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 23, io mem 0xf0889000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.26.6-79.fc9.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:02.1 ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [Z00O] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:04.1 to 64 ehci_hcd 0000:00:04.1: EHCI Host Controller ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:04.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:04.1 ehci_hcd 0000:00:04.1: irq 22, io mem 0xf0889400 ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 5 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.26.6-79.fc9.x86_64 ehci_hcd usb usb2: SerialNumber: 0000:00:04.1 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:02.0: irq 21, io mem 0xf0886000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 5 ports detected input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6 usb 1-1: new high speed USB device using ehci_hcd and address 2 input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.26.6-79.fc9.x86_64 ohci_hcd usb usb3: SerialNumber: 0000:00:02.0 ACPI: PCI Interrupt Link [Z00N] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [Z00N] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:04.0 to 64 ohci_hcd 0000:00:04.0: OHCI Host Controller ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:04.0: irq 20, io mem 0xf0887000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 5 ports detected usb 1-1: configuration #1 chosen from 1 choice usb 1-1: New USB device found, idVendor=03f0, idProduct=c202 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1: Product: Photosmart 8200 series usb 1-1: Manufacturer: HP usb 1-1: SerialNumber: MY64G3W0W704KN usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.26.6-79.fc9.x86_64 ohci_hcd usb usb4: SerialNumber: 0000:00:04.0 USB Universal Host Controller Interface driver v3.0 SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods libata version 3.00 loaded. ahci 0000:00:09.0: version 3.0 ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSI0] -> GSI 23 (level, low) -> IRQ 23 usb 1-3: new high speed USB device using ehci_hcd and address 3 usb 1-3: configuration #1 chosen from 1 choice usb 1-3: New USB device found, idVendor=064e, idProduct=a101 usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3 usb 1-3: Product: Acer CrystalEye webcam usb 1-3: Manufacturer: SuYin usb 1-3: SerialNumber: CN0314-OV03-VA-R02.00.00 usb 4-1: new low speed USB device using ohci_hcd and address 2 usb 4-1: configuration #1 chosen from 1 choice ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio slum part PCI: Setting latency timer of device 0000:00:09.0 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884100 irq 23 ata2: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884180 irq 23 ata3: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884200 irq 23 ata4: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884280 irq 23 input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.0/input/input8 input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:04.0-1 input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.1/input/input9 input,hiddev96,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:04.0-1 usb 4-1: New USB device found, idVendor=0603, idProduct=00f2 usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-1: Product: USB Keyboard usb 4-1: Manufacturer: NOVATEK usb 4-2: new low speed USB device using ohci_hcd and address 3 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) usb 4-2: configuration #1 chosen from 1 choice input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.0/input/input10 ata1.00: ATA-7: WDC WD1600BEVS-22RST0, 04.01G04, max UDMA/133 ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:04.0-2 input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.1/input/input11 input,hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.0-2 usb 4-2: New USB device found, idVendor=046d, idProduct=c521 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: USB Receiver usb 4-2: Manufacturer: Logitech ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-2 04.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk PCI: Setting latency timer of device 0000:00:06.0 to 64 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. type=1404 audit(1225036685.895:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux: 8192 avtab hash slots, 176373 rules. SELinux: 8192 avtab hash slots, 176373 rules. SELinux: 8 users, 12 roles, 2402 types, 117 bools, 1 sens, 1024 cats SELinux: 73 classes, 176373 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda3, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: policy loaded with handle_unknown=allow type=1403 audit(1225036686.238:3): policy loaded auid=4294967295 ses=4294967295 Initializing USB Mass Storage driver... scsi4 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0xC202 usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usblp ACPI: AC Adapter [ACAD] (on-line) ACPI: WMI: Mapper loaded Linux video capture interface: v2.00 uvcvideo: Found UVC 1.00 device Acer CrystalEye webcam (064e:a101) input: Acer CrystalEye webcam as /devices/pci0000:00/0000:00:02.1/usb1/1-3/1-3:1.0/input/input12 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) pata_amd 0000:00:06.0: version 0.3.10 PCI: Setting latency timer of device 0000:00:06.0 to 64 scsi5 : pata_amd scsi6 : pata_amd ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14 ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15 sd 0:0:0:0: Attached scsi generic sg0 type 0 ACPI: Battery Slot [BAT1] (battery present) ata5.00: ATAPI: PIONEER DVD-RW DVR-K17RS, 1.02, max UDMA/33 ata5: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc000c700) ACPI=0x701f (60:600:0x13) ata5.00: configured for UDMA/33 ata6: port disabled. ignoring. isa bounce pool size: 16 pages scsi 5:0:0:0: CD-ROM PIONEER DVD-RW DVR-K17RS 1.02 PQ: 0 ANSI: 5 scsi 5:0:0:0: Attached scsi generic sg1 type 5 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:0a.0 to 64 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman acer-wmi: Acer Laptop ACPI-WMI Extras version 0.1 forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:38:4f:a6:e2 forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3 ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11 ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNK1] -> GSI 11 (level, low) -> IRQ 11 firewire_ohci: Added fw-ohci device 0000:01:04.0, OHCI version 1.0 sdhci: SDHCI controller found at 0000:01:04.1 [1180:0822] (rev 22) ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11 ACPI: PCI Interrupt 0000:01:04.1[B] -> Link [LNK2] -> GSI 11 (level, low) -> IRQ 11 mmc0: Will use DMA mode even though HW doesn't fully claim to support it. Registered led device: mmc0 mmc0: SDHCI at 0xf0500800 irq 11 DMA ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19 ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LK4E] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:05:00.0 to 64 ath5k_pci 0000:05:00.0: registered as 'phy0' ath5k phy0: Support for RF2425 is under development. phy0: Selected rate control algorithm 'pid' firewire_core: created device fw0: GUID 00023f78c500b17b, S400 Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 5:0:0:0: Attached scsi CD-ROM sr0 nvidia: module license 'NVIDIA' taints kernel. ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) ACPI: PCI Interrupt Link [LK2E] enabled at IRQ 17 ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LK2E] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:02:00.0 to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 177.80 Wed Oct 1 14:43:46 PDT 2008 ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LAZA] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:07.0 to 64 usb-storage: device scan complete scsi 4:0:0:0: Direct-Access HP Photosmart 8200 1.00 PQ: 0 ANSI: 2 sd 4:0:0:0: [sdb] Attached SCSI removable disk sd 4:0:0:0: Attached scsi generic sg2 type 0 SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda3, internal journal SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts Adding 2096472k swap on /dev/sda4. Priority:-1 extents:1 across:2096472k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-58 processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0xb (1900 MHz), vid 0x12 powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x13 powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x14 powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e ip6_tables: (C) 2000-2006 Netfilter Core Team Clocksource tsc unstable (delta = -252445787 ns) nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure. fuse init (API version 7.9) SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts ADDRCONF(NETDEV_UP): wlan0: link is not ready eth0: no IPv6 routers present CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 groups: 0 1 domain 1: span 0-1 groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 groups: 1 0 domain 1: span 0-1 groups: 0-1 process `skype' is using obsolete setsockopt SO_BSDCOMPAT CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 groups: 0 1 domain 1: span 0-1 groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 groups: 1 0 domain 1: span 0-1 groups: 0-1 SELinux: initialized (dev sda2, type fuseblk), uses genfs_contexts *************** Application: Plasma Workspace (plasma), signal SIGABRT (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) [Thread debugging using libthread_db enabled] [New Thread 0x7f991c412840 (LWP 2618)] [New Thread 0x45201950 (LWP 3395)] [New Thread 0x44800950 (LWP 3394)] [New Thread 0x43dff950 (LWP 3393)] [New Thread 0x433fe950 (LWP 3392)] [New Thread 0x41488950 (LWP 3391)] [New Thread 0x40a87950 (LWP 2621)] [New Thread 0x429fd950 (LWP 2620)] [New Thread 0x41ffc950 (LWP 2619)] (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) [KCrash handler] #5 0x0000003f81a32215 in raise () from /lib64/libc.so.6 #6 0x0000003f81a33d83 in abort () from /lib64/libc.so.6 #7 0x0000003f896c58a4 in __gnu_cxx::__verbose_terminate_handler () from /usr/lib64/libstdc++.so.6 #8 0x0000003f896c3cb6 in ?? () from /usr/lib64/libstdc++.so.6 #9 0x0000003f896c3ce3 in std::terminate () from /usr/lib64/libstdc++.so.6 #10 0x0000003f896c458f in __cxa_pure_virtual () from /usr/lib64/libstdc++.so.6 #11 0x0000003026e9ee01 in QGraphicsItem::sceneBoundingRect () from /usr/lib64/libQtGui.so.4 #12 0x0000003026ec181a in ?? () from /usr/lib64/libQtGui.so.4 #13 0x0000003026ed43ec in ?? () from /usr/lib64/libQtGui.so.4 #14 0x0000003026ed4de3 in QGraphicsView::items () from /usr/lib64/libQtGui.so.4 #15 0x0000003026ed4e72 in QGraphicsView::itemAt () from /usr/lib64/libQtGui.so.4 #16 0x0000003026ea807b in QGraphicsItem::unsetCursor () from /usr/lib64/libQtGui.so.4 #17 0x0000003026eed29b in ?? () from /usr/lib64/libQtGui.so.4 #18 0x0000003026eed8eb in QGraphicsProxyWidget::~QGraphicsProxyWidget () from /usr/lib64/libQtGui.so.4 #19 0x00007f9912e4ede9 in ?? () from /usr/lib64/kde4/plasma_applet_folderview.so #20 0x0000003026ea4ebc in QGraphicsItem::~QGraphicsItem () from /usr/lib64/libQtGui.so.4 #21 0x0000003026eddd95 in QGraphicsWidget::~QGraphicsWidget () from /usr/lib64/libQtGui.so.4 #22 0x00007f9912e4593b in ?? () from /usr/lib64/kde4/plasma_applet_folderview.so #23 0x000000302595215d in QObject::event () from /usr/lib64/libQtCore.so.4 #24 0x0000003026edec6b in QGraphicsWidget::event () from /usr/lib64/libQtGui.so.4 #25 0x00000030269827dd in QApplicationPrivate::notify_helper () from /usr/lib64/libQtGui.so.4 #26 0x000000302698a58a in QApplication::notify () from /usr/lib64/libQtGui.so.4 #27 0x00000030275fb55b in KApplication::notify () from /usr/lib64/libkdeui.so.5 #28 0x0000003025943081 in QCoreApplication::notifyInternal () from /usr/lib64/libQtCore.so.4 #29 0x0000003025943d2a in QCoreApplicationPrivate::sendPostedEvents () from /usr/lib64/libQtCore.so.4 #30 0x000000302596b8e3 in ?? () from /usr/lib64/libQtCore.so.4 #31 0x0000003b6983742b in g_main_context_dispatch () from /lib64/libglib-2.0.so.0 #32 0x0000003b6983ac0d in ?? () from /lib64/libglib-2.0.so.0 #33 0x0000003b6983adcb in g_main_context_iteration () from /lib64/libglib-2.0.so.0 #34 0x000000302596b56f in QEventDispatcherGlib::processEvents () from /usr/lib64/libQtCore.so.4 #35 0x0000003026a1350f in ?? () from /usr/lib64/libQtGui.so.4 #36 0x0000003025941992 in QEventLoop::processEvents () from /usr/lib64/libQtCore.so.4 #37 0x0000003025941b1d in QEventLoop::exec () from /usr/lib64/libQtCore.so.4 #38 0x0000003025943fed in QCoreApplication::exec () from /usr/lib64/libQtCore.so.4 #39 0x0000003540819473 in kdemain () from /usr/lib64/libkdeinit4_plasma.so #40 0x0000003f81a1e32a in __libc_start_main () from /lib64/libc.so.6 #41 0x0000000000400849 in _start ()
*** This bug has been marked as a duplicate of bug 172671 ***