Version: 0.2 (using KDE 3.5.8, Kubuntu (gutsy) 4:3.5.8-0ubuntu3.1) Compiler: Target: i486-linux-gnu OS: Linux (i686) release 2.6.22-14-generic On start of the X-Server and logging into KDE, I get this from synclient -l: [code] Parameter settings: LeftEdge = 1872 RightEdge = 5072 TopEdge = 1712 BottomEdge = 4144 FingerLow = 25 FingerHigh = 30 MaxTapTime = 180 MaxTapMove = 220 MaxDoubleTapTime = 180 SingleTapTimeout = 180 ClickTime = 100 FastTaps = 0 EmulateMidButtonTime = 75 VertScrollDelta = 60 HorizScrollDelta = 80 VertEdgeScroll = 1 HorizEdgeScroll = 1 VertTwoFingerScroll = 0 HorizTwoFingerScroll = 0 MinSpeed = 0.0822368 MaxSpeed = 0.197368 AccelFactor = 0.00164474 EdgeMotionMinZ = 30 EdgeMotionMaxZ = 160 EdgeMotionMinSpeed = 1 EdgeMotionMaxSpeed = 304 EdgeMotionUseAlways = 0 UpDownScrolling = 1 LeftRightScrolling = 1 UpDownRepeat = 1 LeftRightRepeat = 1 ScrollButtonRepeat = 100 TouchpadOff = 0 GuestMouseOff = 0 LockedDrags = 0 RTCornerButton = 2 RBCornerButton = 3 LTCornerButton = 0 LBCornerButton = 0 TapButton1 = 1 TapButton2 = 2 TapButton3 = 3 CircularScrolling = 0 CircScrollDelta = 0.1 CircScrollTrigger = 0 CircularPad = 0 PalmDetect = 1 PalmMinWidth = 10 PalmMinZ = 200 CoastingSpeed = 0 PressureMotionMinZ = 30 PressureMotionMaxZ = 160 PressureMotionMinFactor = 1 PressureMotionMaxFactor = 1 [/code] After opening ksynaptics, toggling any value and setting it back, I receive this: [code] Parameter settings: LeftEdge = 1178 RightEdge = 5802 TopEdge = 1109 BottomEdge = 4792 FingerLow = 25 FingerHigh = 30 MaxTapTime = 149 MaxTapMove = 220 MaxDoubleTapTime = 180 SingleTapTimeout = 180 ClickTime = 100 FastTaps = 1 EmulateMidButtonTime = 75 VertScrollDelta = 100 HorizScrollDelta = 100 VertEdgeScroll = 1 HorizEdgeScroll = 1 VertTwoFingerScroll = 1 HorizTwoFingerScroll = 1 MinSpeed = 0.0822368 MaxSpeed = 0.197368 AccelFactor = 0.00164474 EdgeMotionMinZ = 30 EdgeMotionMaxZ = 160 EdgeMotionMinSpeed = 1 EdgeMotionMaxSpeed = 304 EdgeMotionUseAlways = 1 UpDownScrolling = 1 LeftRightScrolling = 1 UpDownRepeat = 1 LeftRightRepeat = 1 ScrollButtonRepeat = 100 TouchpadOff = 0 GuestMouseOff = 0 LockedDrags = 0 RTCornerButton = 0 RBCornerButton = 3 LTCornerButton = 0 LBCornerButton = 0 TapButton1 = 1 TapButton2 = 2 TapButton3 = 3 CircularScrolling = 1 CircScrollDelta = 0.05 CircScrollTrigger = 3 CircularPad = 0 PalmDetect = 1 PalmMinWidth = 10 PalmMinZ = 200 CoastingSpeed = 0 PressureMotionMinZ = 30 PressureMotionMaxZ = 160 PressureMotionMinFactor = 1 PressureMotionMaxFactor = 1 [/code] The Xorg.conf reads: [code] Section "InputDevice" Identifier "Touch Pad" Driver "synaptics" Option "ShmConfig" "on" EndSection [/code] and cat /proc/bus/input/devices says: [code] I: Bus=0011 Vendor=0002 Product=0007 Version=25b1 N: Name="SynPS/2 Synaptics TouchPad" P: Phys=isa0060/serio4/input0 S: Sysfs=/class/input/input8 U: Uniq= H: Handlers=mouse1 event3 B: EV=b B: KEY=6420 0 70000 0 0 0 0 0 0 0 0 B: ABS=11000003 [/code] Expected behavior: I want X to start up with the second output of synclient -l without the need, to reset it through ksynaptics everytime. Especially, I want circular scrolling enabled by default.
Hi, same problem for me. As a workaround you can use synclient to set the options. I have uninstalled ksynaptics and created a file in ~/.kde/Autostart which calls synclient. Cheers, David
ksynaptis has stopped its development for a few years. Close its remaining reports with the agreement from the author. As alternative, use synaptiks[1] or kcm_touchpad[2] . [1] http://synaptiks.lunaryorn.de/ [2] http://kde-apps.org/content/show.php?content=113335