Version: 1.4 (using KDE KDE 3.3.2) Installed from: Debian stable Packages OS: Linux kchart.po index.docboek:125 - If you decide to start &kchart; with a selected template as defult - defult --> default index.docboek:225 - If you deside to change - deside --> decide index.docboek:225 - Configuration page 1 - row/column swapping - row/column --> Row/column index.docboek:701 - Simply accept the options - options --> settings Even if you don't accept the options they stay in the dialog. The settings, however, will be lost if you don't accept them. index.docboek:731 - Finally you can save the application from the <guimenu>File</guimenu> menu and quit with <menuchoice><guimenu>File</guimenu> <guimenuitem>Quit</guimenuitem></menuchoice> - If I do NOT save the application, do I have to re-install it? :) Make that: save the chart? index.docboek:768 - In addition to standalone operation, &kchart; is designed to use with &kspread;. - to use --> to be used index.docboek:778 - This is obvious since &kspread; servers, from the &kchart;'s point of view, - servers --> serves - from the &kchart;'s point of view --> from &kchart;'s point of view index.docboek:821, 1207 - Wizard in the middle of a sentence capitalized. All other 'wizards' are not capitalized. index.docboek:906 - <action>Saves the document to the current file.</action> If the chart has not yet been saved the file dialog is shown. - Saves the document --> Saves the chart index.docboek:931 - Opens a document with any supported format. The document does not become the imported file. - A bit confusing ... which document does not become the imported file? The imported document? Or the current document? - Maybe: The original document will not be modified. index.docboek:941 - The document does not become the exported file. - See previous. index.docboek:952 - Imports CSV values from a file, - Imports Comma Separated Values values ... - Maybe: Imports values from a CSV file, index.docboek:1042 - Table for entering the data. - Why not: Opens the Data Editor?
SVN commit 464463 by annma: thanks for the bug report! it's always nice to get such feedback BUG=113424 M +22 -22 index.docbook --- trunk/koffice/doc/kchart/index.docbook #464462:464463 @@ -101,7 +101,7 @@ templates or load existing chart documents. </para> <screenshot> -<screeninfo>KChart Startup Dialog</screeninfo> +<screeninfo>&kchart; Startup Dialog</screeninfo> <mediaobject> <imageobject> <imagedata fileref="kchart-startupdialog.png" format="PNG"/> @@ -123,7 +123,7 @@ this template should already be selected when you launch &kchart;. </para> <para> -If you decide to start &kchart; with a selected template as defult +If you decide to start &kchart; with a selected template as default you can also select this option at the bottom of the dialog. </para> <para> @@ -131,7 +131,7 @@ a bar chart. </para> <screenshot> -<screeninfo>KChart User Interface</screeninfo> +<screeninfo>&kchart; User Interface</screeninfo> <mediaobject> <imageobject> <imagedata fileref="kchart-default.png" format="PNG"/> @@ -223,7 +223,7 @@ this step will be skipped automatically. </para> <para> -If you deside to change the sub type later, you can do this +If you decide to change the sub type later, you can do this in the appropriate configuration dialog which will be shown later. </para> @@ -343,7 +343,7 @@ <sect2 id="config-rowcol"> <title>Row and Column Swapping</title> <screenshot> -<screeninfo>Configuration page 1 - row/column swapping</screeninfo> +<screeninfo>Configuration page 1 - Row/column swapping</screeninfo> <mediaobject> <imageobject> <imagedata fileref="kchart-config1.png" format="PNG"/> @@ -699,7 +699,7 @@ we used in this example. </para> <para> -Simply accept the options by clicking on the <guimenu>OK</guimenu> +Simply accept the settings by clicking on the <guimenu>OK</guimenu> button. </para> </sect3> @@ -729,19 +729,19 @@ of the &kchart; application. </para> <para> -Finally you can save the application from the <guimenu>File</guimenu> -menu and quit with +Finally you can save the chart from the <guimenu>File</guimenu> +menu and quit &kchart; with <menuchoice><guimenu>File</guimenu> <guimenuitem>Quit</guimenuitem> </menuchoice> </para> </sect2> <sect2> -<title>Exporting to Graphic Formats: SVG, PNG, JPG, Krita, Karbon14, Gimp and +<title>Exporting to Graphic Formats: SVG, PNG, JPG, &krita;, &karbon14;, Gimp and more</title> <para> For further processing, the chart can also be exported as a graphics file. -Many formats are available. Using either PNG, SVG, JPG or Krita will likely +Many formats are available. Using either PNG, SVG, JPG or &krita; will likely produce the best result. </para> <para> @@ -766,7 +766,7 @@ <title>Using &kchart; in &kspread;</title> <para> -In addition to standalone operation, &kchart; is designed to use with +In addition to standalone operation, &kchart; is designed to be used with &kspread;. This chapter describes how to create and manipulate charts from within &kspread;. </para> @@ -781,7 +781,7 @@ chart area. This is necessary to get to all advanced configuration options. Keep in mind that the data editor is not available when &kchart; is embedded into &kspread;. This is obvious since &kspread; -servers, from the &kchart;'s point of view, as a powerful data +serves, from &kchart;'s point of view, as a powerful data provider. </para> <para> @@ -818,7 +818,7 @@ format="PNG"/></imageobject></inlinemediaobject> to create the chart. </para></listitem> -<listitem><para>Select the options you want from the chart Wizard. The +<listitem><para>Select the options you want from the chart wizard. The chart Wizard will pop up after you insert the chart.</para></listitem> </itemizedlist> @@ -903,7 +903,7 @@ <guimenu>File</guimenu> <guimenuitem>Save</guimenuitem> </menuchoice></term> -<listitem><para><action>Saves the document to the current file.</action> If the chart +<listitem><para><action>Saves the chart to the current file.</action> If the chart has not yet been saved the file dialog is shown.</para></listitem> </varlistentry> <varlistentry> @@ -929,7 +929,7 @@ <guimenuitem>Import...</guimenuitem> </menuchoice></term> <listitem><para><action>Opens a document with any supported format. -The document does not become the imported file.</action> +The original document will not be modified.</action> </para></listitem> </varlistentry> @@ -939,8 +939,8 @@ <guimenuitem>Export...</guimenuitem> </menuchoice></term> <listitem><para><action>Saves a document to any supported format.</action> -The document does not become the exported file. You can also choose -among many image formats like PNG, SVG, Krita, Gimp or JPG. +The original document will not be modified. You can also choose +among many image formats like PNG, SVG, &krita;, Gimp or JPG. </para></listitem> </varlistentry> @@ -949,8 +949,8 @@ <guimenu>File</guimenu> <guimenuitem>Import Data...</guimenuitem> </menuchoice></term> -<listitem><para><action>Imports CSV values from a file, much like -the CSV import in KSpread. Note that you can specify various +<listitem><para><action>Imports values from a CSV (Comma Separated Values) file, much like +the CSV import in K&kspread;. Note that you can specify various options and different separators (not just commas).</action> </para></listitem> </varlistentry> @@ -1039,7 +1039,7 @@ <guimenu>Edit</guimenu> <guimenuitem>Edit Data...</guimenuitem> </menuchoice></term> -<listitem><para><action>Table for entering the data.</action></para> +<listitem><para><action>Opens the &dataeditor;.</action></para> </listitem> </varlistentry> <varlistentry> @@ -1206,7 +1206,7 @@ <para>Pressing the keys <userinput><keycombo action="seq">&Alt;&Ctrl;<keycap>W</keycap></keycombo></userinput> -now opens the Wizard.</para> +now opens the wizard.</para> </sect2> @@ -1287,7 +1287,7 @@ &kchart; </para> <para> -Program copyright 1998-2005 the KChart Team +Program copyright 1998-2005 the &kchart; Team </para> <para> Original Authors:
Wow! That was fast! :) Natalie