Summary: | No connection for a MicroTouch focuser | ||
---|---|---|---|
Product: | [Applications] kstars | Reporter: | Jean-Claude <jcjesior> |
Component: | general | Assignee: | Jasem Mutlaq <mutlaqja> |
Status: | RESOLVED FIXED | ||
Severity: | normal | CC: | eric.dejouhanet, jcjesior |
Priority: | NOR | ||
Version: | 2.9.3 | ||
Target Milestone: | --- | ||
Platform: | Other | ||
OS: | macOS | ||
Latest Commit: | Version Fixed In: | ||
Sentry Crash Report: | |||
Attachments: |
MicroTouch focuser
Resource busy |
The permanent designations is for when devices are connected to StellarMate, not directly to your Mac as shown in your screenshots. So this changes nothing if you connect directly, the mapping is only used when you use StellarMate. (In reply to Jasem Mutlaq from comment #1) I understood this point. But then why I cannot connect my focuser to KStars when the StellarMate is turned off ? I think that my problem started after my trial to give a permanent designation to my gear. Before this trial I could connect my gear to KStars as I connect my gear NOW to TheSkyX (meaning that the setup is functional). I am sorry to insist but I'm still wondering why my Microtouch focuser doesn't connect to KStars. I tried KStars v.2.8.9, v.2.9.2, v.2.9.3 installed on a freshly installed disk containing nothing else than the system High Sierra and KStars. My setup is working because I connect the focuser without problem to TheSkyX, to Nebulosity4 and to MicroTouch Focus. My setup includes 3 serial-to-USB connectors : Celestron GPS: /dev/cu.usbserial-A104WRIX MaxDomeII: /dev/cu.usbserial-A904PUNX MicroTouch: /dev/cu.SLAB_USBtoUART KStars doesn't detect the port /dev/cu.SLAB_USBtoUART. Why is this ??? Thanks for any help. I have no idea. You might want to post this in INDI forum and see if any Mac users have any ideas about this specific adapter. I presumed you installed all the drivers necessary for it? Yes, the necessary driver has been installed because the focuser can communicate with the other softwares (TheSkyX, Nebulosity4, MicroTouch Focus). Moreover I used this focuser with KStars/ Ekos AutoFocus without problem. I am really troubled. You tried these software on the Mac or another platform? If on Mac, are you sure they're ALL shutdown when you try to communicate with it in KStars? This could be an instance where another App is still holding the connection open. Jasem, that's surely what happens because KStars says : "Resource busy. Check if device is connected to this port" But why this doesn't happen when I'm connecting the focuser to other softwares ? Also, I installed a macOS system and KStars on a brand new disk (no other software). And I still couldn't connect the focuser to KStars. I'll try again. Thanks for the reply. Created attachment 111756 [details]
Resource busy
Here I attached only the focuser to my computer .
It says "Resource busy" but nothing else is running.
I suggest you take this problem to INDI forum and see if other Mac users can suggest something to resolve it. Resolved by PR https://github.com/indilib/indi/issues/672, this is an INDI issue. " Fixes #672 as the driver was limited to int16_t when reading position where it should have been uint16_t https://github.com/indilib/indi/commit/d6b040f44739965e52962cc098de682fe2bd140f " |
Created attachment 111542 [details] MicroTouch focuser I followed the "StellarMate Tutorials - Part 4" to assign permanent designations to my serial-to-USB adapters (scope Celestron GPS + dome MaxDome II) and my MicroTouch focuser. I only succeeded to map the focuser, not the scope and the dome. However, now, I cannot connect my focuser directly to KStars anymore. I checked that the baud rate was correct (19200). My setup works because I can connect the scope, the dome and the focuser to TheSkyX. I started a de novo installation of KStars (I trashed the app KStars and the folder /Application Support/kstars) : but the problem was still present and I couldn't connect the focuser (see the attached screenshot). Do you have any idea ?