Bug 314519

Devices
-----------------------
LITE-ON DVDRW LH-20A1P KL0G (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] [%7]

System
-----------------------
K3b Version: 1.91.0
KDE Version: 4.4.5 (KDE 4.4.5)
QT Version:  4.6.2
Kernel:      2.6.32-45-generic

Used versions
-----------------------
cdrecord: 1.1.10

cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'LITE-ON '
Identification : 'DVDRW LH-20A1P  '
Revision       : 'KL0G'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x001A (DVD+RW)
Profile: 0x002B (DVD+R/DL) 
Profile: 0x001B (DVD+R) 
Profile: 0x001A (DVD+RW) (current)
Profile: 0x0016 (DVD-R/DL layer jump recording) 
Profile: 0x0015 (DVD-R/DL sequential recording) 
Profile: 0x0014 (DVD-RW sequential recording) 
Profile: 0x0013 (DVD-RW restricted overwrite) 
Profile: 0x0012 (DVD-RAM) 
Profile: 0x0011 (DVD-R sequential recording) 
Profile: 0x0010 (DVD-ROM) 
Profile: 0x000A (CD-RW) 
Profile: 0x0009 (CD-R) 
Profile: 0x0008 (CD-ROM) 
Profile: 0x0002 (Removable disk) 
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags   : SWABAUDIO BURNFREE 
Supported modes: PACKET SAO
Drive buf size : 1068032 = 1043 KB
FIFO size      : 12582912 = 12288 KB
/usr/bin/wodim: WARNING: Could not manage to find medium size, and more than 90 mins of data.
Speed set to 5540 KB/s
Track 01: data  4467 MB        
Total size:     5130 MB (508:17.66) = 2287325 sectors
Lout start:     5130 MB (508:19/50) = 2287325 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Starting to write CD/DVD at speed   4.0 in real SAO mode for single session.
Last chance to quit, starting real write in    2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 0
Track 02:    0 of 4467 MB written.
Track 02:    1 of 4467 MB written (fifo 100%) [buf  98%]   0.3x.
Track 02:    2 of 4467 MB written (fifo  99%) [buf  99%]   4.0x.
Track 02:    3 of 4467 MB written (fifo  99%) [buf  98%]   4.1x.
Track 02:    4 of 4467 MB written (fifo 100%) [buf  99%]   4.0x.
Track 02:    5 of 4467 MB written (fifo  99%) [buf  99%]   4.1x.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 00 00 0B DE 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 2.009s timeout 200s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 6221824 bytes
Writing  time:   19.987s
Average write speed 111.0x.
Min drive buffer fill was 98%
Fixating...
Fixating time:    0.003s
/usr/bin/wodim: fifo had 290 puts and 99 gets.
/usr/bin/wodim: fifo was 0 times empty and 48 times full, min fill was 97%.

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=4 -sao driveropts=burnfree -data -tsize=2287325s -


Reproducible: Always

Steps to Reproduce:
1. The source image file is CentOS-5.9-x86_64-bin-DVD-1of2.iso
2. Start K3B
3. Select "More options" > burn image
4. Select image to burn
5. Settings : Verify written data
All other settings default
I tried different speeds, but this didn't solve the problem
Actual Results:  
see the logfile reproduced in "Details above

Expected Results:  
It should have created a bootable DVD.

The same error occurs when writing an iso file of 718.3 MB.